Professional Documents
Culture Documents
EWG 01.1, RWG 4020, Potentiometer: Technical Data Electronic Position Transmitters/potentiometer
EWG 01.1, RWG 4020, Potentiometer: Technical Data Electronic Position Transmitters/potentiometer
EWG 01.1
Contactless and wear-free sensing of the valve position by means of Hall sensors for signalling the valve position.
Notes on table
1) Power supply Power supply possible via: AC, AM controls or external power supply
2) Ambient temperature Depending on temperature range of the actuator: Refer to name plate
Wiring
4 1 1 2 4 Plug/socket connector XK 1 2 3 4
Plug/socket connector XK Plug/socket connector XK
for customer connection for customer connection
for customer connection
21 22 23 24 20 21 22 23 24
20 21 22 23 24
0 – 20 mA
+24 V 0 V 4 – 20 mA 0 – 20 mA
4 – 20 mA 4 – 20 mA
+24 V 0 V
LED
S1 (0/4 mA) S2 (20 mA)
Setting: Setting is performed via push buttons S1 (0/4 mA) and S2 (20 mA). Refer to operation instructions relating to actuator.
Inverse operation: Observe inversed assignment of push buttons S1 and S2 during setting.
We reserve the right to alter data according to improvements made. Previous documents become invalid with the issue of this document.
RWG 4020
On the basis of the actual potentiometer value, the RWG generates a current signal for signalling the valve position.
Notes on table
1) Power supply Power supply possible via: AC, AM controls or external power supply
2) Ambient temperature Depending on temperature range of the actuator: Refer to name plate
Wiring
0 – 20 mA
+24 V 0 V 4 – 20 mA 0 – 20 mA
4 – 20 mA 4 – 20 mA
+24 V 0 V
Inverse operation: For inverse operation, exchange terminals 7 (red/RD) and 5 (black/BK) on position transmitter board.
We reserve the right to alter data according to improvements made. Previous documents become invalid with the issue of this document.
Potentiometer
Travel sensor for recording the valve position.
Notes on table
2) Ambient temperature Depending on temperature range of the actuator: Refer to name plate
3) Resistance (option) Further options on request
The position of the valve can be transmitted as a continuous signal by a potentiometer. The potentiometer is installed in the control unit of the actuator.
We recommend:
Using the potentiometer as voltage divider. Depending on the supply voltage, suitable series resistors are to be provided. Please observe max. rated
power.
For the tandem version, two signals can be evaluated by two potentiometers, e,g, one signal for external controls or one signal for AUMA AC integral
controls.
We reserve the right to alter data according to improvements made. Previous documents become invalid with the issue of this document.