cd Plan 5
30W
Piano seats ame elmore
Basie Construction Notes:
1, Enclosure inside dimensions compensete for the internal
volume taken up by the speaker, internal bracing, and the
2. All comers and joints to be securely glued andi neiled oF
3, Three mutually adjacent inside surfaces (op, one side, and vevono ——<
rear) to be lined with a 2inch thickness of glass wool or
similar acoustic absorptive materiel, De not block vent
‘opening
srptes:
4, Enclosure materia| to be 9/4” plywood or particle board,
5. Internal bracing to be 2" x 2" or 2" x 4” material
6. The front or rear enclosure panel must be removable for
installation of the 30W, which must mount to the rear af the
Front panel. Removable panels should be secured with wood
serews and weather stripping tape
7. For more detailed commentary on construction, see
"Electra-Vaiee Guide to Specker Enclosure Construction”
(Form 1788).
‘Speaker Installation Notes:
1. The 90H shoul be mounted on the back se ofthe ron ————_\—
pena Ow fe 1 nue and bot y F
PerormanceSpeifetians wth 308% |
1. Low-Frequeney 3-d8-Down Point: 31 Hz 20% ||
2. SPLeman) 1868 |
3. SLi) 1868
4 Eo dena a carn andal sa Rano DH oP
Shuct and EV brochure "How to buld an’ eeate Voice Soar]
Camnoton Spvter Sytem, From he proune aioe
center srace —|
E ElectroVoice®
2} 600 cEcIL STREET, BUCHANAN, MICHIGAN 49107