Professional Documents
Culture Documents
Elektronikon® Mk5
User Guide Mk5 Speci5
Version Description
00 First release
01 New functionalities added to the program (service report in Excel and XML)
02 New screens are added to the document (chapter 4.1.2, 4.1.3 and 4.1.4)
03 Program settings screen is changed, Mk4 mapping is changed and called Address
mapping, generation combo box is bigger and can contains more info, download file
can be filtered.
2
Engineering functional descriptions
Table of contents
3
Engineering functional descriptions
• Download to controller
• Download to file
• Upload from controller
• Programming Counters
In order to use this program a licence key is necessary. This licence key can be downloaded from
the “Atlas Copco software market database” in lotus notes.
The first time you run the program, a dialog box appears, and asks for a program licence key.
Fill in the key, click “ok” to confirm and start the program, or click “cancel” to quit the program.
After entering a correct key a new dialog opens, the expiration date is shown.
When a wrong licence key is filled in, Speci5 shows the following dialog.
Click “ok” to close this dialog and try a new licence key.
4
Engineering functional descriptions
2 Preparation
Before using this program the network connection needs to be configured properly.
Follow these steps:
Go to network places
5
Engineering functional descriptions
Important!!!
Only the TCP/IP protocol must be selected for
this connection. When other protocols are
selected, the communication to the controller
might fail.
• IP Address 192.168.100.200
• Subnetmask 255.255.255.0
• Click “ok” and close Network
connections.
6
Engineering functional descriptions
7
Engineering functional descriptions
4 Tab Pages
1. Download.
2. Upload.
3. Program Settings.
4. Tools.
5. Info.
Web Link button : retrieve machine configuration data from ServiceConnect. Only possible when
machine was downloaded at Airpower production facilities.
GUID: is a unique identifier assigned to the downloaded controller.
Controller: target Mk5 controller for the selected configuration
Info: information about the selected model + generation
Family: Product Family of the selected model + generation
Use the Units button to modify the basic units for the controller, after changing, press “ok” to confirm
and close this screen.
8
Engineering functional descriptions
9
Engineering functional descriptions
To add new text to the info text dialog; Select the new name in the Info core Maker dialog.
The text lines are now active, fill in the information you want to display on the Information screen.
Click on the save button, this new information is added to the info_core.ic5 file in the windows
directory.
If a text is too long, the background color of the text box changes to pink.
The maximum text length is 310 pixels per line of text.
10
Engineering functional descriptions
11
Engineering functional descriptions
This screen shows a list of all cs5 files and their download configuration and information.
Use the button Download Licence to controller to search for a valid ES4i or ES6i licence and click
download to controller
12
Engineering functional descriptions
Clicking Download Counters shows a dialog with the current controller counter values and
allows you to program new counter values.
After changing the values in the New Value column and clicking “ok” the new counter
values will be downloaded to the controller. Cancel closes the dialog.
13
Engineering functional descriptions
Counter values can be saved to file (explained chapter 4.2) and can later on be loaded again in
the Program Counters dialog with the button “Load Counters from file”
Button Reset Module Hours will rest module hours to zero. (Not recommended)
14
Engineering functional descriptions
New in Mk5: multiple databases can be loaded in Speci5. e.g. AII GA & AII Z
However, it’s not possible to load more than 1 version of the same database.
e.g. AII GA v1 & AII GA v2
15
Engineering functional descriptions
If no network card is selected, click on the button "Network Card" a new dialog appears.
Select the correct network card from the list and click on the "Ok" button.
16
Engineering functional descriptions
Downloading of the Operating System can be forced checking Always download OS. When left
unchecked, download of the OS will only occur when necessary.
Guaranteed languages are always downloaded and the list can be easily modified by clicking
17
Engineering functional descriptions
18
Engineering functional descriptions
• Remote Start/Stop
• Remote Load/Unload
• Remote Pressure Sensing
Click on the button “Activate”, to activate one of the digital inputs. Click on the button
"Download To Controller" to save the changes.
If one of the digital inputs is active this will light up in a green color.
To deactivate this digital input click on the "Deactivate" button to change this setting, and click on the
button “download to controller”.
A dialog opens en shows the download to the controller.
19
Engineering functional descriptions
The Information screen text of the connected controller can be changed by clicking the button
“Change Info Text On Controller”
20
Engineering functional descriptions
When the licence is expired a new one can be entered with the "Enter new License" button.
For more information see Chapter 1
21
Engineering functional descriptions
A new dialog screen opens, fill in the new licenses key and press "ok" to continue or cancel to quit
this action.
5 Status bar
Status bar shows the IP address of the controller, which database is in use and the selection criteria
for downloading the OS.
If you click on the IP address, a dialog pops up and you will be able to select another controller or
change the IP address.
• Manually
• Scan (automatically)
22