2017-626 Conveyar Balt Equations
oS ao es soe
eee ee
a CS
EQUATIONS
‘TROUGHABILITY
The toughabiy ofa conveyor bot can be eetimatod by using is equation,
mG = belt mass in kg/m?
B= belt width in m
‘Sz = carcass thickness in mm
Gq = transverse rigidity factor (polyamide = 18, steel cord = 42)
I
MODULUS OF ELASTICITY
The modulus of elasticity is calculated by dividing the stress by the strain, M
where
M-= modulus of elasticity (ISO 9856)
F = force (N)
«olast = elastic elongation at the end of the specified number of cycles (Nimm)
In other words: The higher the modulus the lower the elastic elongation per unit stress. More
TENSION FORCE
‘The modulus of elasticity can be used to calculate the tension force it exerts under a specific extension,
where
T= tension force
modulus of elasticity
cross-sectional area
extension
lenath (m)
MINIMUM PERIPHERAL FORCE
Rechimamtet rt oye, FUEL * Bey #1245 )}# 40 H-9 Far Fe
tae
inimum peripheral force
L= conveyor length (m)
{9 = acceleration (mis*)
‘ake mass of revolving idler parts of top strand (kam),