Professional Documents
Culture Documents
PresidentJackson
New Member
10-21-2015 08:50 PM
0 Kudos
Share Reply
3 Replies
Joe Arseneau
Valued Advisor
10-22-2015 01:05 PM
116-316 RAP
BSD-ON: CH3.7 ESS
An error was detected during System Memory DIMM #2 ( J331) R/W.
Procedure
CAUTION
The Accessories have their own power cord. Whenever a procedure states to Power
Off and
then Power On, POPO, etc., powering Off and then powering On the IOT does NOT
Power Off
the Accessory. The Accessory will have to be Powered Off and then On separately
from the
IOT by unplugging the Accessory power cord.
CAUTION
Switch the power Off and observe correct ESD procedures when removing and re-
installing
items from the ESS PWB.
1. Remove and re-install System Memory DIMM #2 ( J331).
2. If the problem still persists, replace System Memory DIMM #2 ( J331) (PL 11.5).
Please be sure to select "Accept Solution" and or select the thumbs up icon to enter
Kudos for posts that resolve your issues. Your feedback counts!
Joe Arseneau
0 Kudos
Share Reply
MazterJedi
New Member
07-29-2016 06:26 PM
https://forum.support.xerox.com/t5/Hardware/Xerox-6204-Wide-Format-Pringer-External-Device-Error-Chain-Link/td-p/181675 2/3
29.11.2020 Xerox 6204 Wide Format Pringer--External Device Er... - Customer Support Forum
0 Kudos
Share Reply
JohnMyllerup
New Member
11-27-2020 05:09 AM
John
0 Kudos
Share Reply
https://forum.support.xerox.com/t5/Hardware/Xerox-6204-Wide-Format-Pringer-External-Device-Error-Chain-Link/td-p/181675 3/3