Professional Documents
Culture Documents
Manual de Servicio At1 2G PDF
Manual de Servicio At1 2G PDF
540103*
AT-1 G2
Service Manual
CARDIOVIT
1
Sales and Service Information
The SCHILLER sales and service centre network is world-wide. Contact your nearest
SCHILLER subsidiary to obtain the address of your local distributor. In case of difficulty,
a complete list of all distributors and subsidiaries is provided on our internet site:
www.schiller.ch
Address Headquarters
SCHILLER AG Phone: +41 (0) 41 766 42 42
Altgasse 68 Fax: +41 (0) 41 761 08 80
CH-6341 Baar, Switzerland E-mail: sales@schiller.ch
Web: www.schiller.ch
The CARDIOVIT AT-1 G2 bears the CE-0123 mark (Notified Body TÜV-SÜD Produkte Service
GmbH, Ridlerstr. 65, 80339 Munich, Germany), indicating its compliance with the essential require-
ments of the Annex I of the Medical Device Directive 93/42/EE regarding safety, functionality and
labelling. The requirements apply to patients, users and third persons who come into contact with
this device within the scope of its intended use.
Contents
1 Safety Notes .............................................. 5
1.1 Responsibility of the User ................................................... 5
1.2 Organisational Measures ..................................................... 5
1.3 Intended Use ........................................................................ 5
1.4 Indications for use................................................................ 5
1.5 Contra-indication .................................................................. 6
1.6 Organisational Measures ..................................................... 6
1.7 Safety-Conscious Operation ............................................... 6
1.8 Safety Facilities .................................................................... 7
1.9 Operation with other Devices .............................................. 7
1.10 Maintenance.......................................................................... 7
1.11 Terms of Warranty................................................................ 8
1.12 Safety Symbols and Pictograms ......................................... 8
1.12.1 Symbols used in this document ......................................................... 8
1.13 Symbols used on the device ............................................... 9
2 Overview ................................................. 10
2.1 Main Components of the
CARDIOVIT AT-1 G2 10
2.1.1 Default.............................................................................................. 10
2.1.2 Options............................................................................................. 10
2.2 Keyboard ............................................................................. 11
2.2.1 Description of keys........................................................................... 11
2.3 Display................................................................................. 12
3 Operation ................................................ 13
3.1 Initial operation................................................................... 13
3.1.1 Location............................................................................................ 13
3.2 Connections........................................................................ 13
3.2.1 Back panel ....................................................................................... 13
3.2.2 Right hand side panel ...................................................................... 14
3.2.3 Connection of external cable assemblies......................................... 14
3.2.4 Potential equalisation ....................................................................... 14
3.3 Switching on / off................................................................ 15
Art. no.: 2.540103 Rev.b
Page 1
CARDIOVIT AT-1 G2
5 Maintenance ............................................23
5.1 Visual inspection ................................................................ 23
5.2 Cleaning the casing and cables ........................................ 24
5.2.1 Cleaning cable assemblies .............................................................. 25
5.2.2 Admissible detergents...................................................................... 25
5.2.3 Non-admissible detergents .............................................................. 25
5.3 Disinfection ......................................................................... 26
5.3.1 Admissible disinfectants................................................................... 26
5.3.2 Non-admissible disinfectants ........................................................... 26
5.4 Cleaning the print head...................................................... 27
5.4.1 Replacing pressure roller print head ............................................... 27
5.5 Battery ................................................................................. 28
5.5.1 Charging the battery ........................................................................ 28
5.5.2 Battery disposal ............................................................................... 28
5.6 Inspection Report ............................................................... 29
5.6.1 Lifed-item replacement every 3 - 5 years......................................... 30
5.7 Accessories and disposables ........................................... 30
Page 2
CARDIOVIT AT-1 G2 Service handbook
11 Index ........................................................ 49
Art. no.: 2.540103 Rev.b
Page 3
Page 4
CARDIOVIT AT-1 G2
1 Safety Notes
This Service Handbook is for qualified service personnel only, trained by Schiller AG.
Refer to the operating instruction manual 2.511235 for operation the device.
Page 5
1 Safety Notes
1.5 Contra-indication CARDIOVIT AT-1 G2
1.5 Contra-indication
The unit is not intended for:
• sterile use
• use in potentially explosive areas or in the presence of flammable gases such as
anaesthetic agents.
• direct cardiac application.
• use in an MRI suite.
Page 6
Safety Notes 1
CARDIOVIT AT-1 G2 Service handbook Safety Facilities 1.8
1.10 Maintenance
Danger of electric shock! Do not open the device. There are no serviceable parts
inside. Refer servicing to qualified technicians authorised by SCHILLER only.
Before cleaning and to isolate the mains power supply, switch the unit off and dis-
connect it from the mains by removing the plug.
Do not use high-temperature sterilisation processes (such as autoclaving). Do
not use E-beam or gamma radiation sterilisation.
Do not use aggressive or abrasive cleaners.
Do not, under any circumstances, immerse the device or cable assemblies in liq-
uid.
Page 7
1 Safety Notes
1.11 Terms of Warranty CARDIOVIT AT-1 G2
In case the device is defective, send it to your local SCHILLER representative or di-
rectly to the manufacturer. The manufacturer can only be held responsible for the
safety, reliability and performance of the device if:
SCHILLER assumes no liability for the loss of data saved on the computer or on the
device. The owner is solely responsible for the data backup.
For a direct danger which could lead to severe personal injury or to death.
Used for electrical dangers, warnings and other notes in regarding operation with elec-
tricity.
Page 8
Safety Notes 1
CARDIOVIT AT-1 G2 Service handbook Symbols used on the device 1.13
Note For possibly dangerous situations, which could lead to damages to property or
system failure. Important or helpful user information
Potential equalisation.
CF symbol. The device is classified safe for internal and external use. However, it is
only defibrillation protected when used with the original SCHILLER patient cable.
The device is IP20-classified and is not protected against the ingress of liquids. Keep
dry.
Symbol for the recognition of electrical and electronic equipment
Equipment/components and accessories no longer required must be disposed of in
a municipally approved collection point or recycling centre. Alternatively, you can re-
turn the equipment to your supplier or the manufacturer for disposal. Improper dis-
posal can harm the environment and human health.
Notified Body TÜV-SÜD Produkte Service GmbH, Ridlerstr. 65, 80339 Munich, Ger-
0123
many
Art. no.: 2.540103 Rev.b
Battery charging status LED (details see Section 3.4.1 Mains and battery indicators,
page 15)
Page 9
2 Overview
2.1 Main Components of the CARDIOVIT AT-1 G2 CARDIOVIT AT-1 G2
2 Overview
The SCHILLER CARDIOVIT AT-1 G2 is a 12-channel ECG unit designed to record,
display, and measure resting ECGs. The display and keyboard enable easy and
intuitive operation to efficiently enter patient data, record ECGs and adjust device
settings.
Menu/navigation keys
Setting keys
2.1.1 Default
• Pacemaker detection
• Manual rhythm printout in real time (channels, speed and amplitude can be
changed)
• Auto mode recording (10 seconds) with user-defined print formats
• Measurements
• Display of all 12 channels (4x3)
• Display of reversed electrodes
• Recording review
• PDF Export
2.1.2 Options
• Interpretation
• CCAA
Page 10
Overview 2
CARDIOVIT AT-1 G2 Service handbook Keyboard 2.2
2.2 Keyboard
Entering patient information. If the key is pressed twice, the previous patient's data
is retrieved.
Printing an ECG from the Preview screen. Unless new patient data has been
entered, additional printouts (copies) can be generated.
During numerical input, the numbers associated with the keys as well as Backspace
etc. are automatically active.
Page 11
2 Overview
2.3 Display CARDIOVIT AT-1 G2
2.3 Display
The display will vary according to the task being carried out. In all screens, however,
the top and bottom areas always display the same category of information. Example
for a typical ECG view:
Battery capacity/status
(green: mains operation, black: battery operation)
Patient number
Memory Stick detected Date and time
I
Leads:
Selection with up/down keys ()
II
III
Speed/amplitude
Myogram filter
Notch filter
(1) (1)
Main menu 28.08.2016 17.58
Menu/Enter key to open
(1) (1) (3)
Page 12
Operation 3
CARDIOVIT AT-1 G2 Service handbook Initial operation 3.1
3 Operation
3.1 Initial operation
Electrical shock hazard. Do not operate the unit if the earth connection is suspect
or if the power supply unit/mains lead is damaged or suspected of being
damaged.
3.1.1 Location
• Do not keep or operate the unit in a wet, moist or dusty environment. Avoid expo-
sure to direct sunlight or heat from other sources.
• Do not allow the unit to come into contact with acidic vapours or liquids.
• The CARDIOVIT AT-1 G2 should not be placed in the vicinity of X-ray or diathermy
units, large transformers or electric motors.
3.2 Connections
All externally connected hardware must be approved by SCHILLER. Connection
of any hardware not approved by SCHILLER is at the owner‘s risk. Moreover, the
unit's warranty may become invalid.
1 2 3 4
Page 13
3 Operation
3.2 Connections CARDIOVIT AT-1 G2
The patient cable as well as the connector comply with the safety standard CF
, e.g. they are fully floating and isolated and defibrillation protected.
The unit is only CF rated and defibrillation protected if used with the original
SCHILER patient cable.
In order to prevent disturbance of the ECG signal caused by electromagnetic
interferences:
– only the original SCHILLER patient cable may be used
– the patient cable needs to be screwed on to ensure a secure connection.
Page 14
Operation 3
CARDIOVIT AT-1 G2 Service handbook Switching on / off 3.3
YES NO
The device automatically shuts off, if it is not used for 11 minutes. A dialog will appear
(1) When the mains supply is connected, the mains LED is lit.
(2) The battery LED is blinking when the battery is being charged, and it is lit when
1
charging is complete.
2
During battery operation (no mains connected), both LEDs are off.
Page 15
3 Operation
3.4 Power supply CARDIOVIT AT-1 G2
Page 16
Operation 3
CARDIOVIT AT-1 G2 Service handbook Changing the Printing Paper 3.5
• Before use, keep the paper in its original cardboard cover. Do not remove the card-
board cover until the paper is to be used.
• Store the paper in a cool, dark and dry location.
• Do not store near chemicals, e.g. sterilisation liquids.
• Do not store in a plastic cover.
• Certain glues can react with the paper. Therefore, do not use glue to attach the
printout onto a mounting sheet.
SCHILLER can only guarantee perfect printouts when original SCHILLER chart paper
or chart paper of the same quality is used.
1. Open the paper tray.
3. Place a new paper pack into the paper tray with the printed (grid) side facing up-
wards and the black paper mark facing the top of the unit.
Art. no.: 2.540103 Rev.b
Page 17
3 Operation
3.6 System and ECG settings CARDIOVIT AT-1 G2
Page 18
General and System Settings 4
CARDIOVIT AT-1 G2 Service handbook System settings 4.1
When the Menu key is pressed, the main menu is displayed. The following illustration
gives an overview of all the settings available.
change confirm
8. Press the key (close) to return to the ECG screen; the settings are saved.
Page 19
4 General and System Settings
4.2 ECG CARDIOVIT AT-1 G2
4.2 ECG
The default settings are printed bold
Filters & formulas Myogram filter LP 25 Hz / LP 40 Hz/ LP 150 Hz / Off (250 Hz)
4.2.3 Display
Standard settings for ECG display.
For Standard:
I / II / III, aVR / aVL / aVF, V1 / V2 / V3, V4 / V5 / V6
Lead group
For Cabrera:
ECG
Page 20
General and System Settings 4
CARDIOVIT AT-1 G2 Service handbook ECG 4.2
4.2.5 Interpretation
Menu Display Description
Interpretation On / Off
Print interpretation Unconfirmed report On / Off
Abnormal ECG On / Off
Page 21
4 General and System Settings
4.3 System CARDIOVIT AT-1 G2
4.3 System
4.3.1 Settings
To show the setting “Simulation ECG”, type the following key sequence 712.
Menu Parameter
4.3.2 Info
Software and hardware versions are displayed.
• Device Name
• S/N number
• HW ID
• HW Revision
• SW version
• SW option
• ETM version
Page 22
Maintenance 5
CARDIOVIT AT-1 G2 Service handbook Visual inspection 5.1
5 Maintenance
The regular system maintenance must include a software check according to the
manufacturer's instructions. The test results must be recorded and compared to the
values in the accompanying documents.
Maintenance work not described in this section may only be performed by a qualified
technician authorised by SCHILLER AG.
The following table indicates the intervals and responsibilities of the maintenance
work required. Local regulations in your country may stipulate additional or different
inspection intervals and tests.
Before each use • Visual inspection of the device and ECG electrodes User
• Visual inspection of the device
(see page 29, 5.6 Inspection Report)
– LCD display
Every 6 months – Cables and accessories User
– Power supply unit and mains cable
• Functional tests according to the instructions (see page 29, 5.6
Inspection Report)
Qualified service
Every 12 months • Safety test according to IEC/EN 62353
personnel
In addition to the visual inspection, switch on the CARDIOVIT AT-1 G2, scroll through
the menu and test some sample functions. In this way, you can check that:
Page 23
5 Maintenance
5.2 Cleaning the casing and cables CARDIOVIT AT-1 G2
• Look for any signs of damage and make sure that the keys and connectors work
correctly.
• Gently bend and flex cables, inspecting them for damage or extreme wear, ex-
posed wires, and bent connectors.
Page 24
Maintenance 5
CARDIOVIT AT-1 G2 Service handbook Cleaning the casing and cables 5.2
20 cm 20 cm 20 cm 20 cm
4. Thoroughly wipe off any excess cleaning solution. Do not let the cleaning solution
run into or accumulate in connector openings, switches, or gaps. If liquid gets into
connectors, dry the area with warm air.
OK Wrong!
OK
• Ethyl alcohol
• Acetone
• Hexane
• Abrasive cleaning powder
• Plastic-dissolving products
Page 25
5 Maintenance
5.3 Disinfection CARDIOVIT AT-1 G2
5.3 Disinfection
Disinfection removes certain bacteria and viruses. Please refer to the manufacturer's
information. Use commercially available disinfectants intended for clinics, hospitals
and medical practices.
Disinfect the device in the same way as described for cleaning the device (previous
page).
• Organic solvents
• Ammonia-based detergent
• Abrasive cleaning agents
• 100 % alcohol
• Conductive solution
• Solutions or products containing the following ingredients:
– Acetone
– Quaternary ammonium compound
– Betadine
– Chlorine, wax or wax compound
– Ketone
– Sodium salt
Page 26
Maintenance 5
CARDIOVIT AT-1 G2 Service handbook Cleaning the print head 5.4
Over a period of time, the printing ink from the grid on the paper can form a film on the
thermal print head. This can cause the print quality to deteriorate. We recommend
therefore that the print head is cleaned with alcohol every month. This is done as
follows:
1. Open the paper tray and remove the paper. The thermal print head is located di-
rectly above the pressure roller (when the paper tray is closed).
2. With a tissue dampened in alcohol, gently rub the printhead to remove the ink res-
idue. If the print head is badly soiled, the colour of the paper grid ink will show on
the tissue.
Page 27
5 Maintenance
5.5 Battery CARDIOVIT AT-1 G2
5.5 Battery
• The lead gel battery does not require any maintenance.
• Replace the battery approx. every 4 years (depending on the application) when the
battery running time falls substantially under one hour.
• Storage and operation conditions outside the temperature range of 15-25 °C will
reduce the service life of the battery!
• Make sure that the battery remains charged during storage. If the device is not
used for more than 3 to 4 months, the battery needs to be protected from deep dis-
charge by recharging it; the ideal capacity is 50-80%. If a fully charged battery is
stored for a long period of time, this may reduce its service life.
No harm will be done to the battery by leaving the unit connected to the mains supply.
Page 28
Maintenance 5
CARDIOVIT AT-1 G2 Service handbook Inspection Report 5.6
In case of a defect, please contact the service department of your hospital ❒, your
SCHILLER representative ❒ or the local after-sales service ❒.
Name: ...................................................................
Phone: ...................................................................
Page 29
5 Maintenance
5.7 Accessories and disposables CARDIOVIT AT-1 G2
Your local representative stocks all the disposables and accessories available for the
CARDIOVIT AT-1 G2. A comprehensive list of all SCHILLER representatives can be
found on the SCHILLER website (www.schiller.ch). In case of difficulty, contact our
head office. Our staff will be pleased to help process your order or to provide
information on all SCHILLER products.
Page 30
Trouble Shooting 6
CARDIOVIT AT-1 G2 Service handbook Possible problems 6.1
6 Trouble Shooting
6.1 Possible problems
Error Possible causes and indicators Error localisation and troubleshooting
• No mains supply; mains indica- Check the mains cable and connection
tor on the device is off. If the mains indicator is lit, it indicates that power is reaching the
• Battery defective/empty unit and the internal power supply should be OK. Press and hold
the On/Off key for 10 seconds. Wait a few seconds and switch the
device on again.
Unit does not switch
on, blank screen Check / change the battery. If the battery is faulty, it is possible that
the unit cannot be switched on even if the mains supply is
connected.
If the screen is still not lit, it indicates a software error, monitor or
internal power supply problem. Call your local SCHILLER
representative.
• Incorrect settings for patient Change sensitivity setting.
Check electrode contact and re-apply the electrodes.
QRS traces overlap • Bad electrode contact If the unit is still not working, call your local SCHILLER representa-
tive.
NOTE: Some patients have very high amplitudes and even on the
lowest sensitivity settings, the QRS traces can overlap.
• High resistance between skin Check the electrode resistance (all leads need to be shown in
and electrodes green)
Re-apply the electrodes.
• Patient not relaxed Ensure that the patient is relaxed and warm.
• Incorrect settings Check all filter settings (Menu key > Filter & formulas).
"Noisy" traces Activate the myogram filter and change the cut-off frequency.
Ensure mains filter is correct for mains supply.
If the problem persists, call your local SCHILLER representative.
Specific devices labelled with the symbol may interfere with
• Electromagnetic interferences the ECG signal. Switch such devices off and/or generally maintain
a sufficient distance to other electric/electronic devices (see chap-
Art. no.: 2.540103 Rev.b
ter 10.2).
• No paper Ensure that paper is loaded.
• Paper incorrectly loaded Reload paper.
Ensure that the paper has been inserted correctly with the black
No printout obtained
mark at the top.
after an auto mode
recording. • Incorrect settings Check that the printout is activated for at least one setting, and that
Print after acquisition is activated (see page 21)
If the printer still doesn‘t work, call your local SCHILLER represent-
ative.
• Old paper inserted Ensure that new SCHILLER paper is inserted.
Note that the CARDIOVIT AT-1 G2 thermal paper is heat- and light-
sensitive. If it is not stored in its original seal, stored in high temper-
Printout fades, is not atures or is simply old, print quality can deteriorate.
clear, or the printout
Over a period of time, the printing ink from the grid on the paper can
is ‘patchy‘ • Dirty print head form a film on the thermal print head. Clean the thermal print head.
• Print-head out of adjustment If the printer still doesn‘t work, call your local SCHILLER represent-
ative.
Page 31
6 Trouble Shooting
6.1 Possible problems CARDIOVIT AT-1 G2
Page 32
Trouble Shooting 6
CARDIOVIT AT-1 G2 Service handbook Preventing electromagnetic interferences 10.2
385
Various radio services (TETRA 400) 380-390 1.8 0.3
- Walkie-talkies (FRS)
430-470 450 2 0.3
- Rescue service, police, fire brigade, servicing (GMRS)
LTE band 13/17 704-707 710/745/780 0.2 0.3
- GSM800/900
- LTE band 5 800-960 810/870/930 2 0.3
- Radio telephone (microcellular) CT1+, CT2, CT3
- GSM1800/1900
- DECT (radio telephone) 1720/1845/
1700-1990 2 0.3
- LTE Band 1/3/4/25 1970
- UMTS
- Bluetooth, WLAN 802.11b/g/n
- LTE Band 7
2400-2570 2450 2 0.3
- RFID 2450 (active and passive transponders and
reading devices)
5240/5500/
WLAN 802.11a/n 5100-5800 0.2 0.3
5785
For permanent HF telecommunication devices (e.g. radio and TV), the recommended
distance can be calculated using the following formula: d = 0.6 P . (The formula
is based on the max. immunity level of 10 V/m in the frequency domain of 80 MHz to
3000 MHz).
Page 33
6 Trouble Shooting
10.2 Preventing electromagnetic interferences CARDIOVIT AT-1 G2
Page 34
Software update& Licence key upgrade 7
CARDIOVIT AT-1 G2 Service handbook Software update procedure 7.1
YES NO
Page 35
7 Software update& Licence key upgrade
7.2 Licence key upgrade procedure CARDIOVIT AT-1 G2
Page 36
Unit test and configuration 8
CARDIOVIT AT-1 G2 Service handbook Basic unit test 8.1
Page 37
8 Unit test and configuration
8.1 Basic unit test CARDIOVIT AT-1 G2
SW update (1) check for SW update Check Battery cond (8) run charge/discharge
Page 38
Unit test and configuration 8
CARDIOVIT AT-1 G2 Service handbook Configuration & End test 8.2
The Configuration and End test will call up at the end Step 10 of the basic unit, when
“Configuration” is selected.
execute
This procedure will be only used for device from stock. This device have been tested
according basic unit test, but do not have a customized licence key and a ECG
performance test.
• Do not use this procedure to update only licence key. For this procedure see
page 35, 7.2 Licence key upgrade procedure.
Go to Menu/Information and type 3 9 8 Config & End Test. The same test as in
chapter 8.2 appears.
Page 39
9 Technical Data
9.1 Device CARDIOVIT AT-1 G2
9 Technical Data
9.1 Device
Dimensions 285 x 189 x 61 mm, approx. 1.94 kg incl. thermal paper
Battery
Capacity • Pb gel battery 12 V, 2.0 Ah
• 4 hours normal use without printing
Battery life Under normal operating conditions, 4 years
Recharging time 90%: approx. 4 hours when the device is switched off
Printer High-resolution thermal head printer; 8 dots/mm (amplitude axis); 20 dots/mm (time
axis) @ 25 mm/s
Frequency range Complies with IEC 60601-2-25 and ANSI/AAMI EC11
Chart paper Thermo-reactive, Z-folded, 80 mm wide
Thermo-reactive, roll, 80 mm wide
Speed • 5 / 25 / 50 mm/s (for resting ECG: 25 / 50 mm/s)
Sensitivity • 5 /10 / 20 mm/mV (for resting ECG: 10 mm/mV)
Ambient conditions
Operating temperature • 10 to 40 °C
Relative humidity • 20 to 90% (non-condensing)
Pressure during operation • 780 to 1060 hPa
Storage temperature • 5 to 50 °C
Transport temperature • -10 to 50 °C
Humidity during storage/transport • 10 to 95% (non-condensing)
Pressure during storage/transport • 500 to 1060 hPa
Page 40
Technical Data 9
CARDIOVIT AT-1 G2 Service handbook Device 9.1
Page 41
9 Technical Data
9.2 ECG CARDIOVIT AT-1 G2
9.2 ECG
Patient input Fully floating and isolated, defibrillation-protected (only with original SCHILLER pa-
tient cable)
Filter
Myogram filter (muscle tremor) Set to 25, 40, 150, 250 Hz (250 Hz = Filter Off)
Notch filter Distortion-free suppression of superimposed AC 50 or AC 60 Hz sinusoidal interfer-
ences by means of adaptive digital filtering
Data record • Listing of all ECG recording data (date, time, filter)
• ECG measurements results (intervals, amplitudes, electrical axes)
With optional interpretation ETM • Averaged complexes
• Guidance on interpreting adult and paediatric ECGs
ECG amplifier Complies with IEC 60601-2-25 and ANSI/AAMI EC11
Protection This device is not designed for outdoor use (IP 20)
Page 42
Technical Data 9
CARDIOVIT AT-1 G2 Service handbook EMC information 9.4
The unit must in reference to the mentioned EMC-hints in the accompanying docu-
ments be installed and operated.
This medical device is intended for use in the electromagnetic environment specified
in the following tables. The user of this device should ensure that it is used in such an
environment.
9.4.2 Immunity
Immunity Test IEC 606101 Test level Compliance Level Electromagnetic environment guidance
Floors should be wood, concrete or ceramic tile. If
ESD ±8kV Contact ±8kV Contact
floors are synthetic, the relative humidity (RH)
IEC 61000-4-2 ±15kV Air ±15kV Air
should be at least 30%.
EFT ±2kV Power supply lines ±2kV Power supply lines Mains power quality should be that of a typical
IEC 61000-4-4 ±1kV I/O lines ±1kV I/O lines commercial or hospital environment.
Surge ±1kV differential mode ±1kV differential mode Mains power quality should be that of a typical
IEC 61000-4-5 ±2kV common mode ±2kV common mode commercial or hospital environment.
Art. no.: 2.540103 Rev.b
< 5% UT < 5% UT
(> 95% dip in UT) (> 95% dip in UT)
for 0,5 cycle for 0,5 cycle
40% UT 40% UT
(60% dip in UT) (60% dip in UT)
for 5 cycles for 5 cycles Mains power quality should be that of a typical
Voltage Dips/Dropout
commercial or hospital environment. The unit
IEC 61000-4-11
70% UT 70% UT shutoff during the >95% for 5 second disturbance.
(30% dip in UT) (30% dip in UT)
for 25 cycles for 25 cycles
< 5% UT < 5% UT
(> 95% dip in UT) (> 95% dip in UT)
for 5 s for 5 s
Power Frequency 50/60Hz
Power frequency magnetic fields should be that of
Magnetic Field 30 A/m 30 A/m
a typical commercial or hospital environment.
IEC 61000-4-8
NOTE UT is the AC mains voltage prior to application of the test level.
Page 43
9 Technical Data
9.4 EMC information CARDIOVIT AT-1 G2
Page 44
Technical Data 9
CARDIOVIT AT-1 G2 Service handbook EMC information 9.4
Pulse
Various radio services (TETRA
385 380-390
400) modulationb 1.8 0.3 27
18 Hz
- Walkie-talkies (FRS) FM c
450 430-470 - Rescue service, police, fire bri- ±5 KHz 2 0.3 28
gade, servicing (GMRS) ±1 KHz sine
710 Pulse
745 704-707 LTE band 13/17 modulation 0.2 0.3 9
780 217 Hz
- GSM800/900
810 Pulse
- LTE band 5
870 800-960 modulation 2 0.3 28
- Radio telephone (microcellular)
930 18 Hz
CT1+, CT2, CT3
- GSM1800/1900
1720 Pulse
- DECT (radio telephone)
1845 1700-1990 modulation 2 0.3 28
- LTE Band 1/3/4/25
1970 217 Hz
- UMTS
- Bluetooth, WLAN 802.11b/g/n
- LTE Band 7 Pulse
2450 2400-2570 - RFID 2450 (active and passive modulation 2 0.3 28
transponders and reading devic- 217 Hz
es)
5240 Pulse
5500 5100-5800 WLAN 802.11a/n modulation 0.2 0.3 9
5785 217 Hz
Page 45
9 Technical Data
9.4 EMC information CARDIOVIT AT-1 G2
Maximum Power
Separation distance according frequency of the transmitter
Output [m]
[Watts]
150 kHz to 80 MHz 80 MHz to 3000 GHz
3.5 6
d = -------- P d = ------ P
V1 E1
Note 1 These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and reflection from structures,
objects and people.
Page 46
Opening housing 10
CARDIOVIT AT-1 G2 Service handbook Disassembly AT-1 G2 10.1
10 Opening housing
10.1 Disassembly AT-1 G2
Opening the CARDIOVIT AT-1 G2 housing is needed for replacing and repairing of
Battery, LCD, PCB and Printer
Do not try to lift up the top part with the LCD. Proceed as shown on the picture below.
3. Lift up the bottom housing as shown and disconnect the battery supply.
Art. no.: 2.540103 Rev.b
Page 47
10 Opening housing
10.1 Disassembly AT-1 G2 CARDIOVIT AT-1 G2
10.1.2 Reassembly
The following is just a brief procedure description for reassembly
Page 48
Index 11
CARDIOVIT AT-1 G2 Service handbook
11 Index
A
Accessories and disposables 39, 45
Address Headquarters ......................... 2
B
Battery
Battery life ........................................ 39
Capacity ........................................... 39
Recharging time .............................. 39
Battery operation ................................ 15
C
Cleaning ............................................... 24
I
Isolating from the mains .................... 16
K
Keys ...................................................... 11
M
Maintenance ............................. 23, 42
P
Potential equalisation ......................... 14
Power supply ....................................... 15
S
Safety Notes .......................................... 5
Sequential ............................................ 20
Simultaneous ...................................... 20
Switching On / Off .............................. 15
Art. no.: 2.540103 Rev.b
Page 49
11 Index
CARDIOVIT AT-1 G2
Page 50