Professional Documents
Culture Documents
HCIP-Routing & Switching-IEEP V2.5 Mock Exam
HCIP-Routing & Switching-IEEP V2.5 Mock Exam
5 mock
exam
1. (Multiple Response) Which of the following cabling modes are commonly used in a data
center? ( )
A. TOR
B. DOD
C. EOR
D. PHP
E. NSF
2. (Simple Response) Which of the following features is not applied to enterprise WANs? ( )
A. Wide coverage
B. Difficult O&M
C. Multiple types
3. (Multiple Response) Data center switches greatly differ from campus switches. Which of the
following features are specific to data center switches but are not supported by campus
switches? ( )
A. MSTP
B. TRILL
C. NFV
D. FCoE
E. VXLAN
4. (True or False) If the number of checked goods is different from the number of goods on the
packing list, you can unpack and inspect goods and then contact the vendor to handle the
inconsistency. ( )
5. (Single Response) Which of the following authorization items is not required for risky
operations? ( )
第 1 页, 共 5 页
HCIP-Routing & Switching-IEEP V2.5 mock
exam
A. Management authorization
B. Technology authorization
C. Customer authorization
D. Administrative authorization
6. (Multiple Response) Which of the following statements regarding the device software
D. You are advised to immediately upgrade the system software to the latest version.
7. (Single Response) Which of the following is the core idea of network troubleshooting? ( )
C. Information collection
D. Top-down
8. (Multiple Response) Which of the following tasks need to be completed during the planning
stage of a project? ( )
9. (Multiple Response) Which of the following contents are included in a migration project
solution? ( )
A. Migration preparation
B. Migration implementation
第 2 页, 共 5 页
HCIP-Routing & Switching-IEEP V2.5 mock
exam
C. Rollback solution
D. Contingency plan
10. (Single Response) Which of the following work is not prepared before the migration? ( )
A. Hardware test
B. Software test
C. Expenses
D. Tools
command is executed to obtain the configuration file of the device. Which of the following
statements is false? ( )
A. Check the port configuration to verify that the MSTP-enabled port is configured (for example,
B. The port connected to a user device has MSTP disabled or is configured as the edge port.
12. (Single Response) If all data packets are lost when you ping the peer host, which of the
A. Configuration comparison
B. Bottom-up
D. Top-down
13. (Multiple Response) During follow-up operations of the structured network troubleshooting
process, which of the following parties does not require advertisement of information? ( )
D. Users who are interested in the root cause for the fault
14. (Single Response) A network administrator fails to access devices on the internal network
A. The route is unreachable, and the client fails to establish a TCP connection with the server.
D. The protocol inbound all command is configured in the VTY user interface view.
15. (Multiple Response) Which of the following items are used to remind customers of
information security? ( )
16. (Single Response) During the structured network troubleshooting process, which of the
A. Focus on how to better solve faults, regardless of whether a fault is within your own
responsibility scope.
B. Pay attention to user feedback and identify faults based on user feedback.
C. To minimize the fault effect, try not to let others know the network fault.
17. (Single Response) If a fault is located on a router that works in redundancy mode with
another router, which of the following methods is the most appropriate for subsequent
troubleshooting? ( )
A. Configuration comparison
第 4 页, 共 5 页
HCIP-Routing & Switching-IEEP V2.5 mock
exam
B. Bottom-up
D. Top-down
18. (Multiple Response) Which of the following causes may result in an IS-IS neighbor
relationship fault? ( )
A. The devices on two ends of a link have the same system ID.
C. When an IS-IS Level-1 neighbor relationship is established, the devices on two ends of a link
D. The IP addresses of interfaces on two ends of a link are on different network segments.
19. (Single Response) Which of the following events represent the end of the network planning
stage? ( )
A. Project initiation
B. Bid release
C. Contract signing
20. (Single Response) Which of the following network features is described by counters such as
mean time between failures (MTBF) and mean time to repair (MTTR)? ( )
A. Scalability
B. Availability
C. Security
D. Cost-effectiveness
Answer:1.AC 2.C 3.BDE 4.F 5.D 6.ABC 7.A 8.BD 9.ABCD 10.C 11.C 12.B 13.ABC 14.A