Professional Documents
Culture Documents
HONDA CIVIC
B4RA-M4RA-BMXA FAMILY
WRONG GEAR STARTS-MULTIPLE SHIFT COMPLAINTS
COMPLAINT: After overhaul, Honda Civics equipped with the B4RA, M4RA and or BMXA transaxle may
exhibit wrong gear starts or multiple shift complaints.
CAUSE: The cause may be, that during overhaul of the valve body and re-assembly one or more of the
feed tubes were placed into the wrong hole on the accumulator body or valve body, causing
low modulating pressure , which is solenoid feed and or low clutch apply pressure to one or
more of the clutch packs.
CORRECTION:To correct this condition, refer to Figure 1 and measure the feed tube lengths to ensure that
they are going into the correct locations on the accumulator body and valve body.
08-37
Page 1 of 2
AUTOMATIC TRANSMISSION SERVICE GROUP
Technical Service Information
HONDA CIVIC
B4RA-M4RA-BMXA FAMILY
FEED TUBE LOCATIONS
8x145mm
8x40mm
8x192.5mm 8x62mm
8x118mm Accumulator
Body
8x138.8mm
Valve Body
8x105.8mm
8x112mm
08-37
Page 2 of 2
AUTOMATIC TRANSMISSION SERVICE GROUP