Professional Documents
Culture Documents
2D730-154E
The DIP switch settings define the basic operations of the system.
The system power must be turned OFF before changing these switch settings.
ON
CN1 ON
CN6
SW1
IC28
IC39
CN3
IC35
BTH1
IC30
CN7
Note: Set only the bit for the ASIC to be downloaded to ON and the other bits to OFF.
3-10
No. 2D730-154E
Note: When installing the DIGITAL PWB as a service part in the system, set DIP SW3
according to the local conditions.
<SW1>
1 23 4
OFF
<SW3>
• For TAMS • For NTSC regions other • For PAL regions other than
than TAMS (Japan etc.) TAMS (EU etc.)
1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8
The settings of these switches can be checked in PWB Information accessed from the
Maintenance menu in the service menu.
3-11
No. 2D730-154E
ON
IC107 CN101
IC103 SW101
IC30
IC104
<SW101>
<SW101>
1 23 4
OFF
12V
ON
OFF ON
SW1 SW2
CN1 CN6
CN2 CN5
CN4 CN3
3-12
No. 2D730-154E
<SW1>
<SW2>
<SW1>
• For TAMS • For NTSC regions other • For PAL regions other than
than TAMS (Japan etc.) TAMS (EU etc.)
1 23 4 1 23 4 1 23 4
DIP switch
69.61 (from the PWB edge)
<DIP SW code>
(Reading of full keyboard country
59.25 (from the PWB edge)
MSB LSB
Code Setting
0 0 0 0 : Japan
0 0 0 1 : Other than Japan
Not used
Note: When the OP-ASSY downsizing part (OP-FUNCKEY; BSM31-5636) is installed in the
system, set this DIP switch according to the language to be used.
3-13