http://www.takipump.comTAKI end suction centritugal pumps are
designed with the latest techniques, advancement in
hydraulics and mechanical. All pumps are manufactured
under a perfect quality control system and high pre-
cision machines. The good design and manufacture
result in high efficiency, strength, rigidity, accessibility
and pleasing appearance.
FEATURES :
1. HIGH EFFICIENCY
Impellers and casings are designed with superb tech-
niques and cast to give high efficiency. The impellers
are closed type three dimension blades, The suction
diameter is made to be one grade larger than the dis-
charge size, resulting in high suction efficiency. The
highest efficiency of TAKI PUMP ensures that minimum,
‘and economical horse-power is used.
2. SPECIFICATIONS
Capacities : Up to 34 m*/min, (8000 US.GPM.)
Heads: Up to 100 metres (330 feet)
Bore sizes. : 50 to 300 mm.
3. APPLICATIONS
INDUSTRIAL; Water treatment, waste dis-
posal, refrigeration plant, chemical process, boiler &
derator feeding, circulation of heat transfer medium
condensate extraction, paper processing, spray booths,
breweries and distilleries.
MUNICIPAL Water supply and drainage,
swimming pools, tlood control, water recticulation
hot water supply, building water services, fire fighting
AGRICULTURE : Water supply, pumping up,
drainage, sprinkling, stock dipping,
4. INTERCHANGEABILITY AVAILABLE
The logical design, only 5 sizes of bearing housings
for 35 sizes of pumps, gives higher interchangeability
‘easier maintenance and fewer parts to be stocked.
STUFFING
BOXES.
La)
y)
|
Ds!
Ds
Ds!
la
La
LS
Z|
iS
iS
Le
sy
UA
Z|
|
Ds!
Ds!
Ds}
Wa
ia
iS
Zh
iS
iS
=|
a!
A
SI
ZI
- |
DJ
Ua
Ds!
bs
Ds
>!
nS
XV AN
Saha
PPA
‘Standard (Wa) Type
Hot Water (HW) Type
‘structure
Th case of clean pumping
Tiguld and neg
405 kgfom G suction
pressure
incase of clean & hot
pumping liquid and
pesitive suction pressure
reppueatare| upto 10s" 105 craic
MSeanng. [Pumping liquid is injected] No liquid is appied
Cooling Coating water5. DIRECTIONS OF DISCHARGE BRANCH
The standard arrangement for discharge is facing upward. However the other directions can be rearrange
according to discharge requirement.
STANDARD FEATURES
CASING Pump casings are highly efficient volute type which are designed and developed with
the latest hydraulic technique. The casing is connected to the bearing housing by
spigot and bolts and, in most cases can be turned to suit various positions.
SUCTION COVER Suction cover gives liquid a direct axial approach to impeller and minimize friction
losses. Suction cover and casing are registered with metal to metal faces this ensuring
accurate alignment.
IMPELLER Impellers are made in one piece with front and rear shrouds for most efficient
operation, accurantely machined and dynamically balanced, the impeller is keyed
to the shaft and secured by a self locking dome-headed nut.
WEARING RING Wearing rings are made of bronze and firmly positioned in the casing and suction
cover.
SHAFT Shafts are accurately designed for minimum deflection and manufactured with high
quality high tensile stee! to provide rigidity and reliable service,
BEARING HOUSING Bearing housing are made of heavy duty cast iron with extra long bearing center
to provide stutdy and rigid support.
BEARING Pumps have two open-sided single row deep groove ball bearings of the 63,64
series. Bearings are oll-bath lubricated.
STUFFING BOX Fitted standard with high quality packing. Various kind of stuffing box other than
the standard one are available to suit the condition of use. Mechanical seals are
also available.US. GPM.
co
54
a i aa eo rt
US. GPM.
1800 rpm woe
3 7
i =}
eae aaa eee Sa a (marin
abo at sooo a hy
Tow RATEus. GPM.
Lit bet 1 pe
ao0orpm | F200
E oo
z
5 20] .
a eT
5 a rr a0 a abo a (mish)
L bo i L L por
asoorpm | |S
oie 01) aa ~—es a Oe ON OCS RSC BOB] m/min)
ar co a abe Ta —ahe a m/hy
FLOW RATESINGLE STAGE
2+STAGE
Casing
Suction cover
Diffuser
Gland
Wearing ring
Wearing ring
Wearing ring
Wearing ring
Shaft
Impeller (1 st stage)
Impeller (2 nd.stage)
Interstage sleeve
Shaft sleeve
Washer
Impeller nut
Lantern ring
"ot ring
Detlector
Gland packing
Gasket
Lip seal
Bearing housing
Bearing cover
il gauge
Ball bearing
Leakage drain
Cast iron
Cast iron
Cast iron
Cast iron
Bronze
Bronze
Bronze
Bronze
Carbon stee!
Cast iron
Cast iron
Cast iron
Mild steel
Mild steel
Brass, Cast iron
Cast iron
Synthetic rubber
Rubber
Asbestos
Asbestos
Cast iron
Cast iron
Cast iron.
Cast iron
Cast iron,
Brass
Bronze
Bronze
Bronze
Bronze
Stainless steel
Bronze
Bronze
Bronze
Stainless steel
Mild steel
Brass
Cast iron.
‘Synthetic rubber
Rubber
Asbestos
Asbestos
Cast iron.
Cast iron.
Bronze
Bronze
Bronze
Brass
Bronze
Bronze
Bronze
Bronze
Stainless steel
Bronze
Bronze
Bronze
Stainless steel
Brass
Brass
Cast iron.
Synthetic rubber
Rubber
Asbestos
Asbestos
Cast iron.
Cast iron.
Stainless steel
Stainless steel
Stainless steal
Stainless steel
Stainless steel
Stainless steel
Stainless steel
Stainless steel
Stainless steel
Stainless stee!
Stainless stee!
Stainless steel
Stainless steel
Brass
Brass
Stainless steel
‘Synthetic rubber
Rubber
Asbestos
Asbestos
Cast iron.
Cast iron.wm
L120,L-150
type200-23, 250-29, 200.35 only
Dimensions in mm,
o0-40 [35 [00 [1s [395 [| 00] 260 [S00 al
TooSOR [25 [oo [290 [sas [15] 400] 260 [300 ze] pe | Pr | pF | pr | pe | PF
“25-33 [150] 125 | 150 [40 [0 | 375 [260 [300 ae] ae |e | 2 | v2 | a | a
25-502 [150125 [247 [ass fot] 47 [200 [300 a5] pe | pr | ee | pr |r | PF
50.3 [2001501170 [70 [54s] 25 [200 [300 ast] oe [a || 12 [ae | ae
200-99 [250 200 75 [495 [75] 47 [200 [400 en
200-10 [250 200 10 [0 [ves | [200 [400 on
700-50 [750 700 | 180 [500 [00] 57 <0 [450 588] pr |p| P| pr | Pe | PF
250-29 [250 260 20 [500 [zs | 350 | <0 [400 Bee] a fore |u| ae | | 3
750-33 [900 [260 | 24 [473 [zz «00 [400 388
250-10 [300 [250 | 180 [9 [80 | 600 400 [400 a on
25050 | 300250 [275 [46s [ts 650 [50 450 [260 [e60 210 [150300 [Sta] 90-[a0-[ ss [Tos | Te [See
|
Flange JIS 10 kglem? RF
% enivo.ot bots)
225 ass | 400) 25
370 | 400| 445) 25
Mee
a2 [16 | wee