Professional Documents
Culture Documents
4 Final Report First
4 Final Report First
We are really grateful because we managed to complete our final report and the project
named ‘SMART MOTO PLATFORM’ within the time given. In composing this paper, we
were research about the entity, usefulness and consumer of the product. These gave us the
opportunity to learn about the product. Its also gave us the chances to connect and used this
knowledge to our project. Above all, the group wish to express Praise to Allah S.W.T on His
Bless and His Greatest for us being able to finish this final project from DJJ5141 and
DJJ6143 course that compulsory to every final semester student and to complete it by group
of four for graduate from polytechnic.
The completion of this undertaking could not have been possible without the participation
and assistance of so many people. Their contributions are sincerely and gratefully
acknowledged. This project cannot be completed without the effort and cooperation from the
group members. We also give our appreciation to everyone that involves helping and guiding
us on our project especially to the lecturer Mr Mohamad Fadhil bin Mohamad Said. He is the
greatest supervisor that gave us the big helps for guides and encourage us in finishing this
project. We also thankful to Madam Yeoh Poh See and Mr Victor A/L Amirtham, for guiding
us in DJJ5143 and DJJ6143 course whereas without their opinion and lesson we couldn’t
manage to understand the needed of the course learning outcomes of this course.
Hence, we also want to thank our friends and respondents for their willingness and support to
spend some times with us to fill in the questioner. May Allah bless all the people that give us
their help and we give them our full respect. To all relatives, our families and others who in
one way or another shared their support either morally, financially, and physically, thank you.
ii
ABSTRACT
In the final results, we have created a Smart Moto Platform which is able to function with the
multi function. We were able to arranged the motorcycle or move it with the project. We also
could use the project as the creeper to make the operating process of repairing in a
comfortable ways. The objective of our project is to extend the movement of the motorcycle
in specific area, easily arrange the motorcycles when the parking packed just by push it with
normal strength and to give help in the mechanics’ jobs, when to get under vehicle in comfort
easily by using it as the creeper.
We undergoes proses of measured, cutting, shaping, welding, and etc which means the basic
of learning of mechanical course when completing the project. This project must be set up
first before used it. But our project is easy to handle and easy to use. The average weight of
our project is less than 25 kg. We hope this project be accepted into daily life so that our
project could be used in worldwide terms.
iii
LIST OF FIGURE
iv
LIST OF TABLE
v
TABLE OF CONTENT
CONTENTS PAGE
TITLE i
APPRECIATION ii
ABSTRACT iii
LIST OF FIGURE iv
LIST OF TABLE v
CHAPTER 1 INTRODUCTION
1.3 Objective 4
1.4 Scope 4
2.1 Introduction 6
2.6 Summary 15
vi
CONTENTS PAGE
CHAPTER 3 METHODOLOGY
3.7.4 Bearing 28
vii
CONTENTS PAGE
4.1 Introduction 36
4.2.6 Implementation 39
5.2 Recommendation 50
REFERENCES 51
APPENDIX 52-54
viii