Professional Documents
Culture Documents
New product
6.5±0.3
(3) High isolation voltage (Viso(rms) : 5 000V)
(4) Recognized by UL1577(double protection isolation) -D
4
NC
Approved by CSA 1 2 3
±0.2 1 2 3
Approved by VDE(DIN EN60747-5-2) Anode 0.6
mark 1.2±0.3
{as model No. "3SD11"}
(6) Lead-free components (adaptable to RoHS directive) 7.12±0.3
3.5±0.5
7.62±0.3 1 Anode
2 Cathode
Applications 3 NC
(1) OA equipment 4 Anode/Cathode
2.9±0.5
5 No external
0.5TYP.
(2) FA power supply connection
(3) Vending machine 3.25±0.5
6 Anode/Cathode
(4) SSRs 0.5±0.1 0.26±0.1
θ
θ : 0 to 13
Absolute Maximum Ratings
(Ta=25 °C)
Parameter Symbol Ratings Unit
Forward current IF 50 mA
Input
Reverse voltage VR 6 V
RMS ON-state current IT(rms) 100 mA
Output *1
Peak one cycle surge current Isurge 1.2 A
Repetitive peak OFF-state voltage VDRM 600 V
*1 50Hz sine wave
*2
Isolation voltage Viso(rms) 5.0 kV
*2 AC for 1 minute,
Operating temperature Topr -30 to +100 °C RH=40 to 60%, f=60Hz
Storage temperature Tstg -55 to +125 °C *3 For 10s
*3
Soldering temperature Tsol 260 °C
As of April 2004
(Notice)
• In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment
using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets
before using any SHARP device.
• Specifications are subject to change without notice for improvement.
(Internet)
• Data for Sharp's optoelectronic/power devices is provided on internet. ( Address http://sharp-world.com/products/device/)
1/1 D2-030401-B