OD-90/CED-91 SEMSTER: 5th TIME ALLOWED: 7 days EXAMINATION: ASG-1 TOTAL MARKS: 20
Q No-1. Determine the magnitude of q1 (5 Marks)
when, q2 = (Last 2 digits of your CMS ID) kN/m; x1= 5 m; x2= 2m; z=3m and the vertical stress increase at point A due to the given loads is 6 kN/m2? * In case of last two digits being 00, it will be assumed 11
Q No-2. The plan of a uniformly loaded (5 Marks)
rectangular area is shown in Figure shown. Determine the vertical stress increase σz below point at a depth of z = (last digit of your CMS ID) m. * In case of last two digits being 00, it will be assumed 11
Q No-3. A soil element is shown in the (10 Marks)
Figure. The magnitudes of stresses are σx = 120 kN/m2, Shear Stress = 40 kN/m2, σy = (Last 3 digits of your CMS ID) kN/m2, and Ѳ = 20°. Determine the following using all three methods (Analytical, Reference Plane and Pole Methods)? a. Magnitudes of the principal stresses. b. Normal and shear stresses on plane AB. c. Orientation of Major and Minor Principle Planes?