Scribd Logo
Upload

Welcome to Scribd!

  • Denso Nec76f0039agd 275036-9050 Toyota PDF

    Uploaded by

    Alpine Lee
    209 views6 pages
    The document provides instructions for connecting an ECU from a Toyota vehicle to a NEW TRASDATA device for reading and writing. It warns that the ECU numbers on the motherboard must be checked against the manual as the cover may be incorrect. Loose wire connections using a flat cable are required due to the soldering pads being rotated 180 degrees, preventing other connection methods. A link must also be made between certain pads as shown for proper reading and writing, and then removed before reinstalling the ECU in the vehicle.

    Original Description:

    Original Title

    DENSO NEC76F0039AGD 275036-9050 TOYOTA.pdf

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Report this Document
    The document provides instructions for connecting an ECU from a Toyota vehicle to a NEW TRASDATA device for reading and writing. It warns that the ECU numbers on the motherboard must be checked against the manual as the cover may be incorrect. Loose wire connections using a flat cable are required due to the soldering pads being rotated 180 degrees, preventing other connection methods. A link must also be made between certain pads as shown for proper reading and writing, and then removed before reinstalling the ECU in the vehicle.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    209 views6 pages

    Denso Nec76f0039agd 275036-9050 Toyota PDF

    Uploaded by

    Alpine Lee
    The document provides instructions for connecting an ECU from a Toyota vehicle to a NEW TRASDATA device for reading and writing. It warns that the ECU numbers on the motherboard must be checked against the manual as the cover may be incorrect. Loose wire connections using a flat cable are required due to the soldering pads being rotated 180 degrees, preventing other connection methods. A link must also be made between certain pads as shown for proper reading and writing, and then removed before reinstalling the ECU in the vehicle.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    of 6

    DENSO_NEC76F0039AGD_275036-9050_TOYOTA VER 02.

    00

    PLUGIN 887 :NEW TRASDATA

    WARNING : for a correct identification of the ECU it is necessary to open the ECU and always
    check that the ECU numbers printed on the motherboard are the same as the numbers declared
    on the manual. Do not trust the numbers on the ECU cover.

    Dimsport s.r.l –15020 Serralunga di Crea (AL) - Italy- Tel. +39014295201 – WEB : www.dimsport.com -1-
    DENSO_NEC76F0039AGD_275036-9050_TOYOTA VER 02.00

    Dimsport s.r.l –15020 Serralunga di Crea (AL) - Italy- Tel. +39014295201 – WEB : www.dimsport.com -2-
    DENSO_NEC76F0039AGD_275036-9050_TOYOTA VER 02.00

    DIRECT CONNECTION
    For the connection use the cable F32GN037C connected to the ECU.
    Make sure that the POWER led (red) on NEW TRASDATA is ON.

    ECU CONNECTOR

    The connector for the 12V and GND signals is the one identified with the letter C written
    on top, please check the previous image.

    Dimsport s.r.l –15020 Serralunga di Crea (AL) - Italy- Tel. +39014295201 – WEB : www.dimsport.com -3-
    DENSO_NEC76F0039AGD_275036-9050_TOYOTA VER 02.00

    LOOSE WIRES CONNECTION:


    For the READING and WRITING procedure use the FLAT cable F34NTF53

    Dimsport s.r.l –15020 Serralunga di Crea (AL) - Italy- Tel. +39014295201 – WEB : www.dimsport.com -4-
    DENSO_NEC76F0039AGD_275036-9050_TOYOTA VER 02.00

    WARNING:
    on this TOYOTA ECU the soldering pads are 180° turned over, for thsi reason it is
    possible ONLY the direct loose wires connection. It is NOT possible to use the DIMA nor
    the soldering adapter.

    WARNING: the grey wire 18 must be soldered on the pad 18 placed on the
    microprocessor’s opposite side.

    Dimsport s.r.l –15020 Serralunga di Crea (AL) - Italy- Tel. +39014295201 – WEB : www.dimsport.com -5-
    DENSO_NEC76F0039AGD_275036-9050_TOYOTA VER 02.00

    For a correct reading and writing operation it is necessary to perform a LINK between the pads
    displayed in the picture here below. Remove the LINK before placing back the ECU into the car.

    Dimsport s.r.l –15020 Serralunga di Crea (AL) - Italy- Tel. +39014295201 – WEB : www.dimsport.com -6-

    You might also like