Professional Documents
Culture Documents
🔍 Search
Follow
Tools required:
The MicroSD card recommended capacity of less than 16GB. Larger capacity MicroSD
cards are not recommended as they are very susceptible to errors.
A computer running Windows XP or later
Card reader
Software required:
On the left sidebar click "Flashing SD Card With Image>>Tools and Instructions to Image SD
Card. Scroll up to the page and nd t9+-SD Tools.zip. Load t9+-SD Tools.zip to your computer in a
convenient le location.
https://support.bitmain.com/hc/en-us/articles/360019493654-S9-series-S9-S9i-S9j-S9-Hydro-Control-Board-Program-Recovery 1/7
12/6/2020 S9 series (S9, S9i, S9j, S9 Hydro) Control Board Program Recovery – Bitmain Support
Flashing Instructions :
Note that there are three types of control boards and each of them requires a different way to
enable ashing.
https://support.bitmain.com/hc/en-us/articles/360019493654-S9-series-S9-S9i-S9j-S9-Hydro-Control-Board-Program-Recovery 2/7
12/6/2020 S9 series (S9, S9i, S9j, S9 Hydro) Control Board Program Recovery – Bitmain Support
To enable it to ash using SD card, you need to shift the JP4 jumper to the right as shown below.
After ashing completed, power off the control board and shift the JP4 jumper back to the
original position.
https://support.bitmain.com/hc/en-us/articles/360019493654-S9-series-S9-S9i-S9j-S9-Hydro-Control-Board-Program-Recovery 3/7
12/6/2020 S9 series (S9, S9i, S9j, S9 Hydro) Control Board Program Recovery – Bitmain Support
https://support.bitmain.com/hc/en-us/articles/360019493654-S9-series-S9-S9i-S9j-S9-Hydro-Control-Board-Program-Recovery 4/7
12/6/2020 S9 series (S9, S9i, S9j, S9 Hydro) Control Board Program Recovery – Bitmain Support
To enable it to ash using SD card, you need to shortcircuit the AB as shown in the picture
below.
1. Reformat the TF and make sure you've copied the correct rmware.
If you are still not clear about the instructions, feel free to contact us for further technical
support.
Contact us >
✓ Yes ✕ No
https://support.bitmain.com/hc/en-us/articles/360019493654-S9-series-S9-S9i-S9j-S9-Hydro-Control-Board-Program-Recovery 6/7
12/6/2020 S9 series (S9, S9i, S9j, S9 Hydro) Control Board Program Recovery – Bitmain Support
Return to top ⬆
Comments
0 comments
https://support.bitmain.com/hc/en-us/articles/360019493654-S9-series-S9-S9i-S9j-S9-Hydro-Control-Board-Program-Recovery 7/7