Professional Documents
Culture Documents
Data Sheet enUS 1889481483 PDF
Data Sheet enUS 1889481483 PDF
The LBB 1938/20 is a powerful 480 W power amplifier in a energized) relays are provided for each supervised
3U high 19”case for rack mounting or tabletop use. LEDs function. These relays are always active regardless of the
on the front panel show the status of the amplifier: switches on the rear panel.
power, audio output level, and supervised functions. This Input
high-performance unit fulfills a wide range of public The system has two balanced inputs with priority control,
address requirements at a surprisingly low cost. each with a loop-through facility. This makes it easy to
connect remote systems that require priority control. An
additional 100 V line input is provided to connect the
Functions amplifier to a 100 V loudspeaker line, to provide more
Dependability power to remote locations.
The amplifier is protected against overload and short Gain or level control is located on the rear of the unit to
circuits. A temperature-controlled fan ensures high avoid accidental setting change. A meter with LED-bar
reliability at high output levels and low acoustic noise at shows the output level.
lower output levels. An overheat protection circuit Output
switches off the power stage and activates an LED on the
The amplifier has 70 V and 100 V outputs for constant
front panel, if the internal temperature reaches a critical
voltage loudspeaker systems and a low impedance output
limit due to poor ventilation or overload.
for 8 ohm loudspeaker loads.
The unit operates both on mains power and on a 24 V
The LBB 1938/20 has two separate priority controlled 100
battery power supply for emergency back up, with
V outputs for zones that only need announcements made
automatic switchover.
via the priority input, and for zones that will not get any
For emergency and evacuation use, the following announcements made via the priority input.
functions are monitored: mains presence, battery present, Controls and indicators
pilot tone presence, amplifier operation. Front panel LEDs Front
indicate the status of supervised functions. The LEDs of
pilot tone supervision and battery status can be switched
• Meter (LED's for -20, -6, 0 dB and Power ON)
• Battery operation indicator
off for general public address use. Failsafe (normally • Overheat indicator
www.boschsecurity.com
2 | LBB 1938/20 Plena Power Amplifier
Mechanical
Ordering Information
LBB 1938/20 Plena Power Amplifier LBB1938/20
480 W power amplifier in a 3U high 19”case
for rack mounting or tabletop use.
www.boschsecurity.com
4 | LBB 1938/20 Plena Power Amplifier
© Bosch Security Systems Inc. 011 | Data subject to change without notice
T2876265227 | Cur: en-US, V20, 27 Jan 2011