You are on page 1of 3

(.

100)
3
2

1 2.54
5.23
Features
(.100)
(.206)

n Multiturn / Cermet / Industrial / Sealed n Mounting hardware available


2.54
(H-117P)
2.41
n 5 terminal styles n RoHS compliant* version
(.100) available (.095)
3
n Tape and reel packaging available n For trimmer applications/processing
2

n Chevron seal design guidelines, click here 2.54 1


(.100)
n Listed on the QPL for style RJ24 per
MIL-R-22097 and RJR24 per High-Rel
Mil-R-39035 2.54
(.100)
3

3296 - 3/8 ˝ Square Trimpot® Trimming Potentiometer


2
1 2.54
(.100) 2.41
(.095)

Electrical Characteristics Product Dimensions


Standard Resistance Range Common Dimensions 3296Y 1.14
.......................10 ohms to 2 megohms 6.40 ± 1.32 10.03 2.54 (.045)
(.100)
(see standard resistance table) (.252 ± .052) (.395) 3
2
Resistance Tolerance............ ±10 % std. .38
MIN.
1.52 4.83 ± .13
1
(tighter tolerance available) (.015) (.060) (.190 ± .005)
2.54 2.54
1.27 ± 0.1
Absolute Minimum Resistance (.050 ± .004) 9.53
(.100) (.100)

............................ 1 % or 2 ohms max. (.375)


(whichever is greater) 2.54 3296Z
1.27 ± 0.1
Contact Resistance Variation (.100)
ADJ. SLOT (.050 ± .004) 2.54
1.14
2.54 (.045)
......................... 1.0 % or 3 ohms max. (.100)
2.19 DIA. (.100) 3
(whichever is greater) (.086)
.56 2
.51 ± .03 DIA.
Adjustability (.020 ± .001)
X
(.022)
WIDE
1
2.54
Voltage................................... ±0.01 % X
.76
DEEP (.100)
2.54
(.100)
(.030)
Resistance............................. ±0.05 %
Resolution.................................... Infinite 3296P
Insulation Resistance................ 500 vdc. 2.54 2.54
6.4 ± 1.32 2 WIPER
(.252 ± .052)
1,000 megohms min. (.100) (.100)
Dielectric Strength 3 CCW 1 3 CW

Sea Level................................ 900 vac 2 CLOCKWISE

70,000 Feet............................. 350 vac 2.54


1
Effective Travel..................25 turns nom. 5.23 (.100) MM
(.206) DIMENSIONS:
(INCHES)
Environmental Characteristics 0.25
3296W 2.54 2.41 TOLERANCES: ± EXCEPT WHERE NOTED
Power Rating (300 volts max.) (.100) (.095)
(.010)
70 °C....................................... 0.5 watt 3
125 °C........................................ 0 watt 2 How To Order
Temperature Range.... -55 °C to +125 °C 2.54 1
Temperature Coefficient.... ±100 ppm/°C (.100)
3296 W - 1 - 103 __ LF
Seal Test.......................85 °C Fluorinert† Model
Humidity........MIL-STD-202 Method 103 Style
3296X
96 hours 2.54
Standard or Modified
(2 % ΔTR, 10 Megohms IR) (.100)
Product Indicator
Vibration........ 20 G (1 % ΔTR; 1 % ΔVR) 3
-1 = Standard Product
2
Shock.......... 100 G (1 % ΔTR; 1 % ΔVR)
2.54 1 Resistance Code
Load Life... 1,000 hours 0.5 watt @ 70 °C 2.41
(.100)
(3 % ΔTR; 3 % or 3 ohms, (.095) Packaging Designator
whichever is greater, CRV) Blank = Tube (Standard)
Rotational Life........................200 cycles Standard Resistance Table R = Tape and Reel (X and W Pin Styles
Only)
(4 % ΔTR; 3 % or 3 ohms, 1.14
Resistance Resistance
2.54 A = Ammo Pack (X and W Pin Styles Only)
whichever is greater, CRV) (Ohms) (.100) 3Code
(.045)

Moisture Sensitivity Level..................N/A Tape and reel material meets Antistatic


10 100
2 ANSI/ESD 5541-2003 packaging standards.
ESD Classification (HBM)......................2 20 200
50 1 500
100 2.54 101 2.54 Terminations
Physical Characteristics 200 (.100) 201 (.100) LF = 100 % Tin-plated (RoHS compliant)
Torque.............................. 3.0 oz-in. max. 500 501 Blank = 90 % Tin / 10 % Lead-plated
1,000 102
Mechanical Stops.................. Wiper idles (Standard)
2,000 202
Terminals........................Solderable pins 5,000 502 1.14 Consult factory for other available options.
10,000 2.54 103 (.045)
Weight........................................ 0.03 oz. 20,000 (.100) 3 203
Marking............................ Manufacturer’s 25,000 253
2 503
50,000
trademark, resistance code, wiring 100,000 1 104
diagram, date code, mfr’s. model 200,000
2.54
(.100)
204 2.54
250,000 254 (.100)
number and style
500,000 504
Wiper................ 50 % (Actual TR) ±10 % 1,000,000 105
Flammability...........................U.L. 94V-0 2,000,000 205
Standard Packaging......50 pcs. per tube
Popular values listed in boldface. Special
Adjustment Tool...............................H-90 resistances available. Specifications are subject to change without notice.
Users should verify actual device performance in their
specific applications. The products described herein and
WARNING Cancer and *RoHS Directive 2015/863, Mar. 31, 2015 and Annex this document are subject to specific legal disclaimers as
Reproductive Harm “Trimpot” is a trademark of Bourns, Inc. set forth on the last page of this document, and at
www.P65Warnings.ca.gov †“Fluorinert” is a registered trademark of 3M Co. www.bourns.com/docs/legal/disclaimer.pdf.
(.15 ± .028) (.709 ± .030)
8.89 + .76 /- .51 2
3
(.350 + .030 /- .020) 1

18 + 1.0/ - 0.5 4.0 ± .03


(709 + .040/ - .020) (.157 ± .001)
DIA.
12.7 + 0.3/ - 0.25
(.500 + .012/ - .010)

4.83 + .30/ -.25


(.190 + .012/ -.010)

2.41 ± .25

3296 - 3/8 ˝ Square Trimpot ALLTrimming


PINS IN-LINE ON Potentiometer
(.095 ± .010)
2.54 ®
CENTER
(.100)
MM
DIMENSIONS:
(INCHES)

Packaging Specifications 1000/REEL/BOX

SIDE ADJUST TOP ADJUST


3296X-1 3296W-1
3.81 ± .71
(.150 ± .028)
28.07 ± .76 12.70
REF. 8.89 + .76 /- .51
(1.105 ± .030) (.500) 12.70
(.350 + .030 /- .020) REF.
(.500)
3.81 ± .71 18 ± .76
18 ± .76
(.15 ± .028) (.709 ± .030)
(.709 ± .030)
8.89 + .76 /- .51 29.59 ± .76
3 2 (1.165 ± .030)
(.350 + .030 /- .020) 1 3 2
1

18 + 1.0/ - 0.5 4.0 ± .03


18 + 1.0/ - 0.5 4.0 ± .03
(709 + .040/ - .020) (.157 ± .001)
DIA. (709 + .040/ - .020) (.157 ± .001)
12.7 + 0.3/ - 0.25 DIA.
12.7 + 0.3/ - 0.25
(.500 + .012/ - .010)
(.500 + .012/ - .010)

4.83 + .30/ -.25


4.83 + .30/ -.25
(.190 + .012/ -.010)
(.190 + .012/ -.010)
2.54
(.100)
2.41 ± .25
2.41 ± .25
(.095 ± .010)
(.095 ± .010)
2.54
ALL PINS IN-LINE ON CENTER
(.100) 2.54
MM ALL PINS IN-LINE ON CENTER
DIMENSIONS: (.100) .51 ± .051
(INCHES) MM DIA. TYP.
(020 ± .002)
DIMENSIONS:
1000/REEL/BOX (INCHES)
1000/REEL/BOX
TOP ADJUST
3296W-1
3.81 ± .71 Meets EIA Specification 468.
(.150 ± .028)
8.89 + .76 /- .51
(.350 + .030 /- .020) 12.70
REF.
(.500)
18 ± .76
(.709 ± .030)
29.59 ± .76
(1.165 ± .030) 3 2
1

18 + 1.0/ - 0.5 4.0 ± .03


(709 + .040/ - .020) (.157 ± .001)
DIA.
12.7 + 0.3/ - 0.25
(.500 + .012/ - .010)

4.83 + .30/ -.25


(.190 + .012/ -.010)
2.54
(.100)
2.41 ± .25
(.095 ± .010)
Asia-Pacific:
ALL PINS IN-LINE ON
Tel:
2.54 +886-2 2562-4117 • Email: asiacus@bourns.com
CENTER
(.100) .51 ± .051
Europe: Tel:MM+36 88 885 877 (020 •± .002)
Email:
DIA. eurocus@bourns.com
TYP.
DIMENSIONS:
The Americas: Tel: +1-951 781-5500 • Email: americus@bourns.com
(INCHES)
1000/REEL/BOX
www.bourns.com

REV. 08/19
Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are
subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
Legal Disclaimer Notice
This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and
P[ZHɉSPH[LZJVSSLJ[P]LS`¸)V\YUZ¹

Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change
^P[OV\[UV[PJL<ZLYZZOV\SKJOLJRMVYHUKVI[HPU[OLSH[LZ[YLSL]HU[PUMVYTH[PVUHUK]LYPM`[OH[Z\JOPUMVYTH[PVUPZJ\YYLU[
and complete before placing orders for Bourns® products.

The characteristics and parameters of a Bourns® product set forth in its data sheet are based on laboratory conditions, and
statements regarding the suitability of products for certain types of applications are based on Bourns’ knowledge of typical
requirements in generic applications. The characteristics and parameters of a Bourns®WYVK\J[PUH\ZLYHWWSPJH[PVUTH`]HY`
MYVT[OLKH[HZOLL[JOHYHJ[LYPZ[PJZHUKWHYHTL[LYZK\L[VP[OLJVTIPUH[PVUVM[OL)V\YUZ® product with other components
PU[OL\ZLY»ZHWWSPJH[PVUVYPP[OLLU]PYVUTLU[VM[OL\ZLYHWWSPJH[PVUP[ZLSM;OLJOHYHJ[LYPZ[PJZHUKWHYHTL[LYZVMH)V\YUZ®
WYVK\J[HSZVJHUHUKKV]HY`PUKPɈLYLU[HWWSPJH[PVUZHUKHJ[\HSWLYMVYTHUJLTH`]HY`V]LY[PTL<ZLYZZOV\SKHS^H`Z]LYPM`
the actual performance of the Bourns®WYVK\J[PU[OLPYZWLJPÄJKL]PJLZHUKHWWSPJH[PVUZHUKTHRL[OLPYV^UPUKLWLUKLU[
Q\KNTLU[ZYLNHYKPUN[OLHTV\U[VMHKKP[PVUHS[LZ[THYNPU[VKLZPNUPU[V[OLPYKL]PJLVYHWWSPJH[PVU[VJVTWLUZH[LMVY
KPɈLYLUJLZIL[^LLUSHIVYH[VY`HUKYLHS^VYSKJVUKP[PVUZ

<USLZZ)V\YUZOHZL_WSPJP[S`KLZPNUH[LKHUPUKP]PK\HS)V\YUZ® product as meeting the requirements of a particular industry


Z[HUKHYKLN0:6;:  VYHWHY[PJ\SHYX\HSPÄJH[PVULN<3SPZ[LKVYYLJVNUPaLK)V\YUZPZUV[YLZWVUZPISLMVYHU`
MHPS\YLVMHUPUKP]PK\HS)V\YUZ®WYVK\J[[VTLL[[OLYLX\PYLTLU[ZVMZ\JOPUK\Z[Y`Z[HUKHYKVYWHY[PJ\SHYX\HSPÄJH[PVU<ZLYZ
of Bourns® products are responsible for ensuring compliance with safety-related requirements and standards applicable to
[OLPYKL]PJLZVYHWWSPJH[PVUZ

Bourns®WYVK\J[ZHYLUV[YLJVTTLUKLKH\[OVYPaLKVYPU[LUKLKMVY\ZLPUU\JSLHYSPMLZH]PUNSPMLJYP[PJHSVYSPMLZ\Z[HPUPUN
HWWSPJH[PVUZUVYPUHU`V[OLYHWWSPJH[PVUZ^OLYLMHPS\YLVYTHSM\UJ[PVUTH`YLZ\S[PUWLYZVUHSPUQ\Y`KLH[OVYZL]LYLWYVWLY[`
VYLU]PYVUTLU[HSKHTHNL<USLZZL_WYLZZS`HUKZWLJPÄJHSS`HWWYV]LKPU^YP[PUNI`[^VH\[OVYPaLK)V\YUZYLWYLZLU[H[P]LZ
on a case-by-case basis, use of any Bourns®WYVK\J[ZPUZ\JO\UH\[OVYPaLKHWWSPJH[PVUZTPNO[UV[ILZHMLHUK[O\ZPZH[
[OL\ZLY»ZZVSLYPZR3PMLJYP[PJHSHWWSPJH[PVUZPUJS\KLKL]PJLZPKLU[PÄLKI`[OL<:-VVKHUK+Y\N(KTPUPZ[YH[PVUHZ*SHZZ000
KL]PJLZHUKNLULYHSS`LX\P]HSLU[JSHZZPÄJH[PVUZV\[ZPKLVM[OL<UP[LK:[H[LZ

)V\YUZL_WYLZZS`PKLU[PÄLZ[OVZL)V\YUZ®Z[HUKHYKWYVK\J[Z[OH[HYLZ\P[HISLMVY\ZLPUH\[VTV[P]LHWWSPJH[PVUZVUZ\JO
WYVK\J[Z»KH[HZOLL[ZPU[OLZLJ[PVULU[P[SLK¸(WWSPJH[PVUZ¹<USLZZL_WYLZZS`HUKZWLJPÄJHSS`HWWYV]LKPU^YP[PUNI`[^V
H\[OVYPaLK)V\YUZYLWYLZLU[H[P]LZVUHJHZLI`JHZLIHZPZ\ZLVMHU`V[OLY)V\YUZ®Z[HUKHYKWYVK\J[ZPUHUH\[VTV[P]L
HWWSPJH[PVUTPNO[UV[ILZHMLHUK[O\ZPZUV[YLJVTTLUKLKH\[OVYPaLKVYPU[LUKLKHUKPZH[[OL\ZLY»ZZVSLYPZR0M)V\YUZ
L_WYLZZS`PKLU[PÄLZHZ\IJH[LNVY`VMH\[VTV[P]LHWWSPJH[PVUPU[OLKH[HZOLL[MVYP[ZZ[HUKHYKWYVK\J[ZZ\JOHZPUMV[HPUTLU[
VYSPNO[PUNZ\JOPKLU[PÄJH[PVUTLHUZ[OH[)V\YUZOHZYL]PL^LKP[ZZ[HUKHYKWYVK\J[HUKOHZKL[LYTPULK[OH[PMZ\JO)V\YUZ®
Z[HUKHYKWYVK\J[PZJVUZPKLYLKMVYWV[LU[PHS\ZLPUH\[VTV[P]LHWWSPJH[PVUZP[ZOV\SKVUS`IL\ZLKPUZ\JOZ\IJH[LNVY`VM
H\[VTV[P]LHWWSPJH[PVUZ(U`YLMLYLUJL[V)V\YUZ®Z[HUKHYKWYVK\J[PU[OLKH[HZOLL[HZJVTWSPHU[^P[O[OL(,*8Z[HUKHYK
VY¸H\[VTV[P]LNYHKL¹KVLZUV[I`P[ZLSMTLHU[OH[)V\YUZOHZHWWYV]LKZ\JOWYVK\J[MVY\ZLPUHUH\[VTV[P]LHWWSPJH[PVU

Bourns®Z[HUKHYKWYVK\J[ZHYLUV[[LZ[LK[VJVTWS`^P[O<UP[LK:[H[LZ-LKLYHS(]PH[PVU(KTPUPZ[YH[PVUZ[HUKHYKZNLULYHSS`
VYHU`V[OLYNLULYHSS`LX\P]HSLU[NV]LYUTLU[HSVYNHUPaH[PVUZ[HUKHYKHWWSPJHISL[VWYVK\J[ZKLZPNULKVYTHU\MHJ[\YLKMVY
\ZLPUHPYJYHM[VYZWHJLHWWSPJH[PVUZ)V\YUZL_WYLZZS`PKLU[PÄLZ)V\YUZ® standard products that are suitable for use in aircraft
VYZWHJLHWWSPJH[PVUZVUZ\JOWYVK\J[Z»KH[HZOLL[ZPU[OLZLJ[PVULU[P[SLK¸(WWSPJH[PVUZ¹<USLZZL_WYLZZS`HUKZWLJPÄJHSS`
HWWYV]LKPU^YP[PUNI`[^VH\[OVYPaLK)V\YUZYLWYLZLU[H[P]LZVUHJHZLI`JHZLIHZPZ\ZLVMHU`V[OLY)V\YUZ® standard
WYVK\J[PUHUHPYJYHM[VYZWHJLHWWSPJH[PVUTPNO[UV[ILZHMLHUK[O\ZPZUV[YLJVTTLUKLKH\[OVYPaLKVYPU[LUKLKHUKPZH[
the user’s sole risk.

;OL\ZLHUKSL]LSVM[LZ[PUNHWWSPJHISL[V)V\YUZ® custom products shall be negotiated on a case-by-case basis by Bourns


and the user for which such Bourns®J\Z[VTWYVK\J[ZHYLZWLJPHSS`KLZPNULK(IZLU[H^YP[[LUHNYLLTLU[IL[^LLU)V\YUZ
HUK[OL\ZLYYLNHYKPUN[OL\ZLHUKSL]LSVMZ\JO[LZ[PUN[OLHIV]LWYV]PZPVUZHWWSPJHISL[V)V\YUZ® standard products shall
also apply to such Bourns® custom products.

Users shall not sell, transfer, export or re-export any Bourns®WYVK\J[ZVY[LJOUVSVN`MVY\ZLPUHJ[P]P[PLZ^OPJOPU]VS]L[OL


KLZPNUKL]LSVWTLU[WYVK\J[PVU\ZLVYZ[VJRWPSPUNVMU\JSLHYJOLTPJHSVYIPVSVNPJHS^LHWVUZVYTPZZPSLZUVYZOHSS[OL`\ZL
Bourns®WYVK\J[ZVY[LJOUVSVN`PUHU`MHJPSP[`^OPJOLUNHNLZPUHJ[P]P[PLZYLSH[PUN[VZ\JOKL]PJLZ;OLMVYLNVPUNYLZ[YPJ[PVUZ
HWWS`[VHSS\ZLZHUKHWWSPJH[PVUZ[OH[]PVSH[LUH[PVUHSVYPU[LYUH[PVUHSWYVOPIP[PVUZPUJS\KPUNLTIHYNVZVYPU[LYUH[PVUHS
YLN\SH[PVUZ-\Y[OLY)V\YUZ® products and Bourns technology and technical data may not under any circumstance be
exported or re-exported to countries subject to international sanctions or embargoes. Bourns® products may not, without
WYPVYH\[OVYPaH[PVUMYVT)V\YUZHUKVY[OL<:.V]LYUTLU[ILYLZVSK[YHUZMLYYLKVYYLL_WVY[LK[VHU`WHY[`UV[LSPNPISL
[VYLJLP]L<:JVTTVKP[PLZZVM[^HYLHUK[LJOUPJHSKH[H

;V[OLTH_PT\TL_[LU[WLYTP[[LKI`HWWSPJHISLSH^)V\YUZKPZJSHPTZPHU`HUKHSSSPHIPSP[`MVYZWLJPHSW\UP[P]LJVUZLX\LU[PHS
PUJPKLU[HSVYPUKPYLJ[KHTHNLZVYSVZ[YL]LU\LZVYSVZ[WYVÄ[ZHUKPPHU`HUKHSSPTWSPLK^HYYHU[PLZPUJS\KPUNPTWSPLK^HYYHU[PLZ
VMÄ[ULZZMVYWHY[PJ\SHYW\YWVZLUVUPUMYPUNLTLU[HUKTLYJOHU[HIPSP[`
)RU\RXUFRQYHQLHQFHFRSLHVRIWKLV/HJDO'LVFODLPHU1RWLFHZLWK*HUPDQ6SDQLVK-DSDQHVH7UDGLWLRQDO&KLQHVHDQG6LPSOLÀHG&KLQHVH
bilingual versions are available at:
Web Page: http://www.bourns.com/legal/disclaimers-terms-and-policies
PDF: http://www.bourns.com/docs/Legal/disclaimer.pdf
*9

You might also like