Professional Documents
Culture Documents
T45
Surface drill rig for construction
sites, aggregate and limestone
quarrying.
Hole range:
76 –127 mm / 3”– 5”
a sturdy drill rig
for Outstanding performance
Easy to operate - energy efficient - simple to main-
tain, the PowerROC T45 provides you a rig with
high reliability and performance.
The surface drill rig PowerROC T45 the maintenance costs. The Power-
has a low number of movable parts ROC T45 is perfect for the construc-
due to the modular and straightfor- tion sites, as well as aggregate quar-
ward design, which greatly reduces ries and limestone quarries.
Main benefits
Easy operation and maintenance in a vari-
ety of drilling applications
2 3
TECHNICAL SPECIFICATIONS
for Outstanding drilling performance • Track frames with single or triple grouser pads, hydraulic track oscillation • Extendable boom system
and two speed traction • Carousel type rod handling system: 6 rods in the carousel and 1 rod on
due to the modular design, the powerroc t45 makes the service • Cummins turbo charged diesel engine, QSC8.3, Tier 3/stage III, QSL9, Tier the feed beam.
simple, requiring no special tools when the operator conducts 4/Stage IIIB • Hydraulic rock drill
regular maintenance. • Screw type compressor • Dust collector system
• Operator’s cabin, ROPS and FOPS approved
volumes
Hydraulic oil tank 200 l 53 US gal
hydraulic system
+ ergonomic design and Easy serviceability Hydraulic system, total 250 l 66 US gal
Hydraulic oil cooler Compressor oil 28 l 7.4 US gal
For greater operator efficiency and comfort, the boom is located at the
Max ambient temperature 52°C 125°F
front right of the rig giving the operator full visibility, and the joystick in Diesel engine oil 27 l 7.1 US gal
cab is ergonomically designed. Easy access to vital service points means Diesel engine, cooling water 55 l 14.5 US gal
Diesel engine, fuel tank 400 l 106 US gal
the PowerROC T45 is designed for easy maintenance. For easy trouble-
electrical system Traction gear 2.5 l 0.66 US gal
shooting, all hoses and the simplified electrical system are clearly marked
Lubrication tank (ECL) 0.66 l 0.17 US gal
to coincide with the schematic drawings in spare parts lists. Voltage 24 V
Batteries 2 x 12 V, 120 Ah
Alternator 24 V, 70 A
Work lights, front 4 x 70 W
Work lights, rear 1 x 70 W
Reverse alarm
4 5
TECHNICAL SPECIFICATIONS TECHNICAL SPECIFICATIONS
1272
988
the life of drill accessories.
2360
1528
55º
2868
R2
Comfortable operating 36
R3
2
environment with ROPS/ 96
7
585
FOPS protection and
equipped with easy hydraulic
pilot drill control joysticks.
High-volume air-compressor Horizontal reach (mm) Minimum toe-hole height (mm)
matches the high production
of HC158R rock drill.
10000
1447
90° 90°
792
3005
1350
3300
4018
3275
L2 2627
3086
3584
optional equipment 4336
Hole measuring systems Rod handling system 4542 Feed swing angle
• 2D angle indicator - TRANSTRONIC HQS • RHS T45 x 12´x 6 FOR 63 mm coupling
• 3D angle indicator with speed and depth - TRANSTRONIC HQS • RHS T45 x 12´x 6 FOR 66 mm coupling
• Conversion kit T51/72 mm sleeve to 77 mm sleeve Vertical reach (mm)
Cold climate Track
• Anti freezing system • Track chain with single grouser pads (only available for CE)
• Cold weather kit Water mist system
• Water mist system (exclusive tank)
Dust control • Water mist system ASME tank
• Dust pre-separator
Parts and services
Delivered equipment, not mounted • Extra spare parts book
• Gas charging equipment (for rock drill)
• Hydraulic pressure test kit
6 7
9851 3462 01a, 2015-06 Yokohama, Japan. Legal Notice © Copyright 2015, Atlas Copco Construction and Mining Equipment Co., LTD. Any unauthorized use or copying of the contents or any part thereof is prohibited.
Illustrations and photos may show equipment with optional extras. No warranty is made regarding specifications or otherwise. Specifications and equipment are subject to change without notice. Consult your Atlas Copco
Customer Center for specific information.
www.atlascopco.com