Professional Documents
Culture Documents
PROcede FILM TRANSFERT IMAGING de 3D Systems en
PROcede FILM TRANSFERT IMAGING de 3D Systems en
c -1. Principle
The F.T.I. technology exploits, on the one hand, a
photopolymerizable resin deposited on a film and
on the other hand a DLP projector to illuminate
each layer of resin. The parts are built from top to
bottom.
The machine is one of the 3D printers
installed in design offices to obtain physical
models quickly and cheaply. The capacity of the
process is limited by the resolution and power of
DLP projectors.
C -2 Applications
This type of machine is intended to equip design offices to quickly produce models at a low cost.
Production from the Part with support Face ech 1 Part with support
bottom
Y.Pauliat Additive 52
manufacturing
IUT of Limousin 2013-2014
Y.Pauliat Additive 53
manufacturing