PRACTICE MIDTERM CET 1. Determine the reactions at the support.
2. Classify the truss shown as
unstable, statically determinate, or statically indeterminate. If the truss is statically indeterminate, then determine the degree of static indeterminacy.
3.
Determine the reactions at the support.
4. Determine the reactions at A
and B. 09/10/20 SET B
5. Draw the Shear, Bending moment and Axial Force Diagram of the given frame.
6. Determine the slope and deflection at point D of the beam shown.
7. Determine the slope and deflection at point D of the beam shown.
8. Determine the smallest
moment of inertia I required for the beam shown, so that its maximum deflection does not exceed the limit of 1/360 of the span length (i.e., (delta)max greater than or equal to 360). 09/10/20 SET B