Professional Documents
Culture Documents
THE SOURCE
ENGLISH
FIXED-TURNING ®
of the resting face (OEM tolerance)
CONTOUR™
Guaranty optimum quality with an
operator who only has a few days of
training X
... the extra comfort
X
Guaranty the same quality for decades
to come regardless of the materials and
precision levels required
NEWEN FRANCE
220 rue de l’Industrie • 74800 La Roche S/Foron • FRANCE
Tel: +33 (0)4-50-25-87-82 • Fax: +33 (0)4-50-97-64-93
NEWEN GERMANY
Schwabstrasse 18 • 70197 Stuttgart •GERMANY
Tel: +49 (0) 711 18 56 27 15 • Fax: +49 (0) 711 664 94 40
NEWEN ITALY
Via Bonafus N0 2 • 10123 Turin • ITALY
Tel: +49 (0) 11 20 76 605 • Fax: +39 (0) 11 81 24 788
Page(s)
NWN®, Carbide Form Tips 4-35
• General Information on NWN® Carbide Form Tips 6-9
• 45 Degree Seat Angle Carbide Form Tips - A1 10
• 45.50 Degree Seat Angle Carbide Form Tips -A1 10
• 46 Degree Seat Angle Carbide Form Tips -A1 10
• 20 Degree Seat Angle Carbide Form Tips -A1 11
• 30 Degree Seat Angle Carbide Form Tips -A1 12-13
• 30.50, 31, 37.50 Degree Seat Angle Carbide Form Tips -A1 13
• 45 Degree Seat Angle Carbide Form Tips -A2 14-15
• 45 Degree High-Performance Seat Angle Carbide Form Tips - B1, B2, B3 16-17
• 50 Degree High-Performance Seat Angle Carbide Form Tips - B1, B2, B3 18
• 52 Degree High-Performance Seat Angle Carbide Form Tips - B1, B2, B3 19
• 55 Degree High-Performance Seat Angle Carbide Form Tips - B1, B2, B3 19
• Radii Carbide Form Tips - Chamber Area 20-21
• Radii Carbide Form Tips - Bowl Area 22-23
• Single Angle Carbide Form Tips 24-27
• Counterboring Carbide Form Tips 27
• NWN®, Carbide Form Tips Packages 28
• Templates to order Custom Carbide Form Tips 29-35
Metrology 52
g
the carbide used to manufacture NEWEN® tips is of
the finest quality and is specially treated to make the
cutting edges of the tips as strong as possible.
λ
the base of the tip has a relief angle in order to avoid
heeling.
k
this dimension has very close tolerance in order to
make the tips completely interchangeable without
adjustment of the tool holder and for added precision
and considerable time saving.
a,b,c,α
precision positioning of the tip seat angle and proper
tightening of the tip result directly from parameters a,
b, c and α. Both the positioning of the seat angle of NEWEN® carbide form tips are cut one at
the tip and proper tightening of the tip are critical to a time guaranteeing maximum precision.
ensure adequate rigidity of the tool and to eliminate
chattering. The tolerances on NEWEN®
High-Performance Tips are the strictest of any tips
available on the market.
d
the seat angle of the screw hole is designed to
ensure maximum pressure on the tips in their
housing. NEWEN® T8 torx screws guarantee
optimum tightening of the tips.
e
this small radius, made while the tips are being
machined, reinforces the tips significantly at this
delicate place and allow for longer use of the tips.
W- A 1 -NW N-4 0 3 8
w 12 N
WA1-NWN4038 NWN,
Genuine* NEWEN® Carbide Form Tip.
• Open up to NWN’s world of
unlimited profiles!
X
Look for NWN, the best profile • Over 300 stock profiles to
XA1-NWN4038 money can buy! choose from.
10N NWN, the only carbide tips that • Custom profiles available within
Y
are CNC machined one at a time 1 week from order date and/or
YA1-NWN4038
to ensure perfect angle accuracy blueprint approval.
8 N
and consistency. • Use NWN-3a-CAD™ to design
Z
* gen.u.ine [L genuinus native] actually your custom tips in seconds and
Z6A1-NWN4038 produced by the alleged source or author.
lower your costs (refer to page 36).
OtherN
NORTH AMERICA: Tel: +1 (760) 233-0067 - Order Toll Free (USA and CANADA): 1-800-639-3693 5
FRANCE: Tel: +33 (0)4-50-25-87-82 - Fax: +33 (0)4-50-97-64-93
A = Seat Width B = Top Width α α1 α2
45°
NEWEN REFERENCE
mm in mm in Seat Angle Top Angle Throat Angle
ln 1 WA1-NWN4183 0.8 .031 1.0 .039 45 32 60
ln 2 WA1-NWN4445 1.0 .039 1.0 .039 45 15 60
ln 3
WA1-NWN1101 1.0 .039 1.0 .039 45 25 60
ln 4
WA1-NWN4028 1.0 .039 1.2 .047 45 30 60
ln 5 WA1-NWN4984 1.0 .039 1.2 .047 45 38 52
ln 6 WA1-NWN4983 1.0 .039 1.3 .051 45 30 75
ln 7
WA1-NWN1102 1.0 .039 1.4 .055 45 25 60
ln 8 WA1-NWN4588 1.0 .039 1.6 .063 45 25 52
ln 9 WA1-NWN4029 1.0 .039 1.6 .063 45 35 52
ln 10 WA1-NWN4030 1.0 .039 1.6 .063 45 35 55
ln 11
WA1-NWN4031 1.0 .039 1.6 .063 45 35 60
ln 12
WA1-NWN4980 1.0 .039 1.6 .063 45 38 65
ln 13
WA1-NWN4017 1.0 .039 1.8 .071 45 15 60
ln 14
WA1-NWN4981 1.0 .039 1.8 .071 45 20 75
ln 15
WA1-NWN1103 1.0 .039 1.8 .071 45 25 60
ln 16
WA1-NWN4090 1.0 .039 1.8 .071 45 30 60
ln 17 WA1-NWN4303 1.0 .039 2.0 .079 45 30 60
ln 18 WA1-NWN4087 1.0 .039 2.0 .079 45 37 52
ln 19 WA1-NWN4903 1.0 .039 2.54 .100 45 37 58
ln 20
WA1-NWN4904 1.0 .039 2.54 .100 45 37 64
ln 21
WA1-NWN1105 1.0 .039 3.0 .118 45 25 60
ln 22
WA1-NWN4451 1.0 .039 3.0 .118 45 30 60
ln 23
WA1-NWN4182 1.2 .047 1.2 .047 45 30 60
ln 24
WA1-NWN1122 1.2 .047 1.4 .055 45 25 60
ln 25
WA1-NWN4016 1.2 .047 1.8 .071 45 15 60
ln 26
WA1-NWN4032 1.3 .051 1.0 .039 45 30 60
ln 27 WA1-NWN4221 1.3 .051 1.2 .047 45 30 60
ln 28 WA1-NWN4480 1.3 .051 1.6 .063 45 30 60
ln 29 WA1-NWN4091 1.3 .051 1.8 .071 45 30 60
ln 30 WA1-NWN4034 1.3 .051 2.0 .079 45 30 52
ln 31
WA1-NWN4035 1.3 .051 2.0 .079 45 30 60
ln 32
WA1-NWN4975 1.3 .051 2.0 .079 45 35R1 56
ln 33 WA1-NWN4033 1.3 .051 2.0 .079 45 37 52
ln 34 WA1-NWN1141 1.4 .055 1.0 .039 45 25 60
ln 35 WA1-NWN4036 1.4 .055 1.0 .039 45 30 60
ln 36
WA1-NWN1142 1.4 .055 1.4 .055 45 25 60
ln 37
WA1-NWN4093 1.4 .055 2.0 .079 45 30 60
ln 38
WA1-NWN4109 1.5 .059 1.0 .039 45 15 60
ln 39
1.5 .059 1.0 .039 45 30 60
ln 40
WA1-NWN4094
WA1-NWN4982 1.5 .059 1.2 .047 45 38 52 DIRECT
ln 41
WA1-NWN4978 1.5 .059 1.3 .051 45 30 75
ln 42
WA1-NWN4261 1.5 .059 1.4 .055 45 15 60
ln 43
WA1-NWN4993 1.5 .059 1.4 .055 45 20 75
ln 44
WA1-NWN4241 1.5 .059 1.4 .055 45 25 52
ln 45
WA1-NWN4003 1.5 .059 1.4 .055 45 25 60
ln 46
WA1-NWN4216 1.5 .059 1.4 .055 45 30 60
ln 47
WA1-NWN4025 1.5 .059 1.8 .071 45 15 60
ln 48
WA1-NWN4077 1.5 .059 1.8 .071 45 30 52
ln 49
WA1-NWN4038 1.5 .059 1.8 .071 45 30 60
ln 50
WA1-NWN4037 1.5 .059 1.8 .071 45 37 52
ln 51
WA1-NWN4015 1.5 .059 2.0 .079 45 15 60
ln 52
WA1-NWN4177 1.5 .059 2.0 .079 45 30 60
ln 53
WA1-NWN4986 1.5 .059 3.0 .118 45 30 60
ln 54
WA1-NWN1161 1.6 .063 1.0 .039 45 25 60
ln 55
WA1-NWN4039 1.6 .063 1.0 .039 45 30 60
ln 56
WA1-NWN4135 1.6 .063 1.2 .047 45 30 52
NORTH AMERICA: Tel: +1 (760) 233-0067 - Order Toll Free (USA and CANADA): 1-800-639-3693 7
FRANCE: Tel: +33 (0)4-50-25-87-82 - Fax: +33 (0)4-50-97-64-93
1 2
45° 3
4 5 6
7 8 9
•
• 30°- 1.50mm (.059”) •
45°- 1.00mm (.039”) • R0.80mm (.032”) Tan 15°-94°
• •
• R1.50mm (.059”) Tan 30°-94° R10.00mm (.394”) Tan 82°-45° 15°- 1.56mm (.062”)
• 30°- 0.98mm (.038”) • 45°- 1.00mm (.039”)
45°- 1.00mm (.039”) 75°- 4.67mm (.184”)
75°- 3.39mm (.134”) •
•
13 14 15
•
• R0.50mm (.019”) Tan 32°-94°
• 32°- 1.49mm (.059”)
• R1.50mm (.059”) Tan 38°-94° • R1.50mm (.059”) Tan 32°-94° 45°- 1.20mm (.047”)
• 38°- 0.91mm (.036”) •
60°- 5.60mm (.221”)
• • 32°- 1.05mm (.041”) •
45°- 1.10mm (.043”) 45°- 1.20mm (.047”)
60°- 2.80mm (.110”) 60°- 2.50mm (.098”)
• •
16 17 18
•
•
• R1.50mm (.059”) Tan 30°-94° • 30°- 1.50mm (.059”)
•
• R1.50mm (.059”) Tan 30°-94° 30°- 0.98mm (.038”) 45°- 1.50mm (.059”)
• •
30°- 0.98mm (.038”) 45°- 1.50mm (.059”) R10.00mm (.394”) Tan 80°-44°
45°- 1.30mm (.051”) 60°- 5.00mm (.197”)
60°- 4.80mm (.189”) •
• •
NORTH AMERICA: Tel: +1 (760) 233-0067 - Order Toll Free (USA and CANADA): 1-800-639-3693 9
FRANCE: Tel: +33 (0)4-50-25-87-82 - Fax: +33 (0)4-50-97-64-93
A = Seat Width B = Top Width α
45.5°...
α1 α2
NEWEN REFERENCE
mm in mm in Seat Angle Top Angle Throat Angle
ln 1 WA1-NWN5185 1.5 .059 1.5 .059 45.5 2 75
ln 2
ln 3
ln 4
ln 5 WA1-NWN4603 1.2 .047 1.2 .047 46 30 55
ln 6 WA1-NWN4601 1.6 .063 0.8 .031 46 35 55
ln 7 WA1-NWN4604 1.9 .075 1.2 .047 46 30 52
ln 8 WA1-NWN4602 2.2 .087 0.8 .031 46 30 55
ln 9
ln 10
ln 11
ln 12
ln 13
ln 14
ln 15
ln 16
ln 17
ln 18
ln 19
ln 20
ln 21
ln 22
ln 23
ln 24
ln 25
ln 26
ln 27
ln 28
ln 29
ln 30
ln 31
ln 32
ln 33
ln 34
ln 35
ln 36
ln 37
ln 38
ln 39
ln 40
ln 41
ln 42
ln 43
ln 44
ln 45 DIRECT
ln 46
ln 47
ln 48
ln 49
ln 50
ln 51
ln 52
ln 53
ln 54
ln 55
ln 56
NORTH AMERICA: Tel: +1 (760) 233-0067 - Order Toll Free (USA and CANADA): 1-800-639-3693 11
FRANCE: Tel: +33 (0)4-50-25-87-82 - Fax: +33 (0)4-50-97-64-93
A = Seat Width B = Top Width α α1 α2
30°
NEWEN REFERENCE
mm in mm in Seat Angle Top Angle Throat Angle
ln 1
WA1-NWN2102 1.0 .039 1.4 .055 30 15 60
ln 2
WA1-NWN4999 1.0 .039 1.4 .055 30 23 52
ln 3
WA1-NWN3062 1.0 .039 1.6 .063 30 20 52
ln 4
WA1-NWN2103 1.0 .039 1.8 .071 30 15 60
ln 5
WA1-NWN2000 1.0 .039 2.5 .098 30 15 60
ln 6
WA1-NWN3245 1.2 .047 1.0 .039 30 15 60
ln 7
WA1-NWN3023 1.3 .051 1.0 .039 30 15 45
ln 8
WA1-NWN3065 1.3 .051 2.0 .079 30 15 45
ln 9
WA1-NWN3061 1.3 .051 2.0 .079 30 15 60
ln 10
WA1-NWN3068 1.5 .059 1.4 .055 30 15 45
ln 11
WA1-NWN2152 1.5 .059 1.4 .055 30 15 60
ln 12
WA1-NWN4998 1.5 .059 1.4 .055 30 23 52
ln 13
WA1-NWN3064 1.5 .059 1.8 .071 30 15 45
ln 14
WA1-NWN3016 1.5 .059 1.8 .071 30 15 52
ln 15
WA1-NWN2153 1.5 .059 1.8 .071 30 15 60
ln 16
WA1-NWN3024 1.5 .059 2.0 .079 30 0 60
ln 17
WA1-NWN3200 1.5 .059 2.0 .079 30 15 60
ln 18
WA1-NWN3025 1.5 .059 3.0 .118 30 20 60
ln 19
WA1-NWN3078 1.6 .063 1.2 .047 30 15 45
ln 20
WA1-NWN3194 1.6 .063 1.8 .071 30 15 45
ln 21
WA1-NWN3195 1.6 .063 1.8 .071 30 15 52
ln 22
WA1-NWN3026 1.6 .063 2.0 .079 30 15 45
ln 23
WA1-NWN3067 1.6 .063 2.0 .079 30 15 60
ln 24
WA1-NWN4997 1.6 .063 2.2 .087 30 15 60
ln 25
WA1-NWN3027 1.8 .071 1.4 .055 30 15 60
ln 26
WA1-NWN3146 1.8 .071 2.0 .079 30 15 45
ln 27
WA1-NWN3072 1.9 .075 1.0 .039 30 15 45
ln 28
WA1-NWN3010 1.9 .075 1.8 .071 30 15 60
ln 29
WA1-NWN3029 1.9 .075 2.0 .079 30 15 60
ln 30
WA1-NWN3196 2.0 .079 1.2 .047 30 15 45
ln 31
WA1-NWN2202 2.0 .079 1.4 .055 30 15 60
ln 32
WA1-NWN4995 2.0 .079 1.4 .055 30 23 52
ln 33
WA1-NWN2203 2.0 .079 1.8 .071 30 15 60
ln 34
WA1-NWN4996 2.0 .079 1.9 .075 30 15 60
ln 35
WA1-NWN3084 2.0 .079 2.0 .079 30 15 45
ln 36
WA1-NWN3198 2.2 .087 2.0 .079 30 15 60
ln 37
WA1-NWN3226 2.4 .095 1.4 .055 30 15 70
ln 38
WA1-NWN2252 2.5 .098 1.4 .055 30 15 60
ln 39
WA1-NWN2253 2.5 .098 1.8 .071 30 15 60
ln 40
WA1-NWN3032 2.5 .098 2.0 .079 30 15 60
ln 41
WA1-NWN2254 2.5 .098 2.2 .087 30 15 60
ln 42
WA1-NWN3031 2.8 .110 2.0 .079 30 0 60
ln 43
WA1-NWN2302 3.0 .118 1.4 .055 30 15 60
ln 44
WA1-NWN3199 3.8 .150 3.0 .118 30 20 45
ln 45
ln 46 DIRECT
ln 47
ln 48
ln 49
ln 50
ln 51
ln 52
ln 53
ln 54
ln 55
ln 56
NORTH AMERICA: Tel: +1 (760) 233-0067 - Order Toll Free (USA and CANADA): 1-800-639-3693 13
FRANCE: Tel: +33 (0)4-50-25-87-82 - Fax: +33 (0)4-50-97-64-93
19 20
45° 21
•
• • R1.50mm (.059”) Tan 20°-94°
•
R1.50mm (.059”) Tan 32°-94° • R1.50mm (.059”) Tan 15°-94° • 20°- 0.97mm (.038”)
• • 15°- 1.03mm (.041”)
• 32°- 0.70mm (.028”) 45°- 1.00mm (.039”)
45°- 1.00mm (.039”) 60°- 4.10mm (.162”)
45°- 0.80mm (.032”) 75°- 3.00mm (.118”) •
• 60°- 3.00mm (.118”) •
22 23 24
•
•
• 30°- 1.20mm (.047”)
• R1.50mm (.059”) Tan 30°-94° 45°- 1.00mm (.039”)
• R1.50mm (.059”) Tan 32°-94° • 30°- 0.98mm (.038”) 60°- 4.50mm (.177”)
• 32°- 1.05mm (.041”)
• 45°- 1.00mm (.039”) •
45°- 1.20mm (.047”) 75°- 3.39mm (.133”)
60°- 2.40mm (.095”) •
•
25 26 27
•
• • R1.50mm (.059”) Tan 30°-94°
R1.50mm (.059”) Tan 38°-94° •
30°- 0.98mm (.038”)
• • R1.50mm (.059”) Tan 30°-94° •
38°- 0.91mm (.036”)
• • 30°- 0.98mm (.038”) 45°- 1.50mm (.059”)
45°- 1.10mm (.043”) 60°- 3.40mm (.134”)
60°- 2.80mm (.110”) 45°- 1.30mm (.051”) •
•
• 60°- 2.40mm (.095”)
•
•
30°- 0.77mm (.030”)
45°- 0.77mm (.030”) •
• •
60°- 6.00mm (.236”) • R1.50mm (.059”) Tan 15°-94° • 32°- 1.00mm (.039”)
•
15°- 1.03mm (.041”)
45°- 0.80mm (.032”)
• 45°- 1.00mm (.039”) • 60°- 3.50mm (.138”)
75°- 3.00mm (.118”)
31 32 33
•
•
• •
• 30°- 1.20mm (.047”) •
30°- 1.20mm (.047”) 45°- 1.00mm (.039”) • R1.50mm (.059”) Tan 38°-94°
• • 60°- 6.00mm (.236”) 38°- 0.91mm (.036”)
45°- 1.00mm (.039”)
60°- 3.50mm (.138”) • 45°- 1.10mm (.043”)
60°- 2.80mm (.110”)
34 35 36
• •
•
• •
R1.50mm (.059”) Tan 30°-94° • 30°- 1.80mm (.071”)
30°- 0.98mm (.039”) 45°- 1.50mm (.059”)
• 45°- 1.30mm (.051”) • 60°- 3.30mm (.130”) 91°- 11mm (.433”)
30°- 4.30mm (.169”) R0.20mm (.008”) Tan 0°-91°
•
NORTH AMERICA: Tel: +1 (760) 233-0067 - Order Toll Free (USA and CANADA): 1-800-639-3693 15
FRANCE: Tel: +33 (0)4-50-25-87-82 - Fax: +33 (0)4-50-97-64-93
37
HIGH-PERFORMANCE
38
45° 39
• • R1.50mm (.059”)
• R2.00mm (.079”) • R1.00mm (.039”) •
• Tan 35°-94°
• Tan 35°-94° Tan 35°-94° •
• 35°- 1.40mm (.055”) • 35°- 1.50mm (.059”)
35°- 1.30mm (.051”) 45°- 1.00mm (.039”)
45°- 0.80mm (.032”) •
45°- 1.00mm (.039”) R12.00mm (.473”)
65°- 10.42mm (.410”) 60°- 2.50mm (.098”) Tan 75°-55°
75°- 8.55mm (.337”) 75°- 3.00mm (.118”)
•
• • R3.50mm (.138”)
Tan 45°-75°
• 45°- 2.50mm (.098”)
•
40 41 42
•
• R2.50mm (.098”) •
Tan 38°-94° • 35°- 2.50mm (.098”) •
R3.00mm (.118”)
•
38°- 2.40mm (.095”) Tan 30°-94°
• 45°- 1.00mm (.039”) • 30°- 1.20mm (.047”)
45°- 1.00mm (.039”) 55°- 2.50mm (.098”) •
60°- 11.67mm (.459”) 65°- 2.50mm (.098”) 45°- 1.20mm (.047”)
• • R13.00mm (.512”)
75°- 6.41mm (.252”) Tan 69°-55°
•
75°- 3.00mm (.118”)
• R3.00mm (.118”)
• Tan 0°-75°
•
43 44 45
•
• R4.06mm (.160”)
• R4.06mm (.160”)
• 30°- 2.30mm (.091”) • Tan 30°-94° • Tan 30°-94°
45°- 1.29mm (.051”) • • 30°- 1.76mm (.069”)
• • 30°- 1.33mm (.052”)
60°- 1.88mm (.074”) • 45°- 1.30mm (.051”)
70°- 7.40mm (.291”) 45°- 1.30mm (.051”)
60°- 1.81mm (.071”) 60°- 1.80mm (.071”)
70°- 7.40mm (.291”) 70°- 6.54mm (.257”)
• •
•
•
• •
R2.00mm (.079”) • R1.00mm (.039”) 40°- 2.50mm (.098”)
• • Tan 35°-94° •
Tan 35°-94° 45°- 1.30mm (.051”)
• 35°- 2.50mm (.098”) 35°- 2.00mm (.079”) • 55°- 2.50mm (.098”)
• 45°- 1.30mm (.051”) 45°- 1.30mm (.051”) 65°- 2.50mm (.098”)
60°- 1.70mm (.067”) 56°- 12.00mm (.473”) • 75°- 5.73mm (.226”)
•
75°- 2.20mm (.087”) •
82°- 5.00mm (.197”)
• •
49 50 51
•
• • R1.50mm (.059”) • R1.50mm (.059”)
R4.06mm (.160”) • Tan 35°-94° •
• Tan 35°-94°
• Tan 30°-94° 35°- 1.50mm (.059”)
• 30°- 0.89mm (.035”) 35°- 1.42mm (.056”)
• 45°- 1.50mm (.059”) 45°- 1.50mm (.059”)
• 45°- 1.31mm (.052”) R12.00mm (.472”) R12.00mm (.472”)
60°- 1.78mm (.070”) Tan 75°-55° •
Tan 85°-55°
70°- 7.48mm (.294”) 75°- 3.00mm (.118”) 85°- 3.00mm (.118”)
• R3.50mm (.138”) R3.50mm (.138”)
• Tan 45°-75° Tan 76°-85°
• 45°- 2.50mm (.098”) •
•
•
52 53 54
•
R4.06mm (.160”) •
Tan 35°-94° R1.50mm (.059”)
•
• Tan 35°-94°
35°- 2.30mm (.091”) • 35°- 1.50mm (.059”) R12.00mm (.473”)
• 45°- 1.90mm (.075”)
R10.00mm (.394”) 45°- 2.50mm (.098”) Tan 90°-45°
Tan 90°-56° R12.00mm (.472”) •
•
Tan 75°-55°
45°- 3.00mm (.118”)
• 90°- 1.29mm (.051”)
R1.27mm (.050”) 75°- 3.00mm (.118”)
Tan 0°-90° •
R3.50mm (.138”)
Tan 35°-975°
•
• •
•
NORTH AMERICA: Tel: +1 (760) 233-0067 - Order Toll Free (USA and CANADA): 1-800-639-3693 17
FRANCE: Tel: +33 (0)4-50-25-87-82 - Fax: +33 (0)4-50-97-64-93
HIGH-PERFORMANCE
55
•
•
WB1-NWN557
56 57 58
50°
• R1.50mm (.059”) •
Tan 40°-94° R1.50mm (.059”) •
• •
Tan 48°-94° R1.50mm (.059”)
• 40°- 2.00mm (.079”) • • Tan 40°-94°
50°- 1.00mm (.039”) 48°- 2.42mm (.095”)
• • • 40°- 2.15mm (.085”)
60°- 2.00mm (.079”) 50°- 1.10mm (.043”)
65°- 1.50mm (.059”) 50°- 1.20mm (.047”)
• 65°- 2.00mm (.079”) • R12.00mm (.473”)
70°- 6.80mm (.268”) 75°- 8.55mm (.337”)
Tan 75°-55°
75°- 3.00mm (.118”)
• •
R3.50mm (.138”)
• Tan 30°-75°
59 60
• R1.00mm (.039”)
•
R1.27mm (.050”) • Tan 445°-92°
• Tan 45°-94° 45°- 2.03mm (.080”)
•
45°- 3.18mm (.125”) 50°- 1.27mm (.050”)
• •
50°- 1.40mm (.055”) 65°- 1.91mm (.075”)
R12.00mm (.473”) •
• Tan 75°-55°
65°- 1.91mm (.075”)
75°- 3.00mm (.118”) • 75°- 1.91mm (.075”)
R3.51mm (.138”)
• Tan 45°-75° • 85°- 3.18mm (.125”)
45°- 1.00mm (.039”)
• 87°- 1.91mm (.075”)
• •
DIRECT
WB3-NWN957 WB3-NWN985
•
R2.00mm (.079”)
• Tan 45°-90°
• 40°- 2.29mm (.090”)
• 45°- 3.05mm (.120”)
• 52°- 1.52mm (.060”) •
52°- 0.81mm (.032”)
• 65°- 2.03mm (.080”) • 38°- 2.60mm (.102”) • 60°- 1.52mm (.060”)
78°- 7.31mm (.288”) 52°- 1.50mm (.059”) 65°- 0.25mm (.010”)
R25.70mm (1.012”) • R16.00mm (.630”)
Tan 80°-62° Tan 80°-65°
• 80°- 2.54mm (.100”)
R3.00mm (.118”)
• •
Tan 45°-80°
•
64 65 66
55°
• R2.50mm (.098”) • R3.18mm (.125”) • R2.50mm (.098”)
• Tan 48°-90° Tan 55°-90° • Tan 47°-90°
• •
• 51°- 1.40mm (.055”) 45°- 2.54mm (.100”) 47°- 0.89mm (.035”)
• 55°- 1.27mm (.050”) 55°- 1.50mm (.059”)
55°- 0.81mm (.032”)
• R17.00mm (.669”) R17.78mm (.700”) • R17.00mm (.669”)
Tan 80°-62° Tan 82°-60° Tan 80°-62°
80°- 1.52mm (.060”) •
82°- 2.54mm (.100”) 80°- 1.52mm (.060”)
R3.00mm (.118”) R3.00mm (.118”)
• Tan 45°-80° • Tan 45°-80°
• 45°- 3.00mm (.118”) • 45°- 3.00mm (.118”)
• • •
67 68
• R1.50mm (.059”)
•
Tan 45°-94° •
• 45°- 1.50mm (.059”) 45°- 2.40mm (.095”)
• 55°- 1.50mm (.059”)
55°- 1.50mm (.059”) 65°- 2.40mm (.095”)
R12.20mm (.480”) •
• Tan 85°-55° 75°- 6.55mm (.258”)
85°- 3.00mm (.118”)
R3.50mm (.138”)
Tan 75°-85° •
•
NORTH AMERICA: Tel: +1 (760) 233-0067 - Order Toll Free (USA and CANADA): 1-800-639-3693 19
FRANCE: Tel: +33 (0)4-50-25-87-82 - Fax: +33 (0)4-50-97-64-93
RADIUS
69 70 71
R2.00mm (.079”)
• • Tan 75°-94°
R4.00mm (.158”) R5.00mm (.197”) • R6.50mm (.256”)
Tan 15°-94° Tan 15°-94° Tan 15°-75°
• 15°- 5.52mm (.217”) •
15°- 5.00mm (197”) • 15°- 3.00mm (118”)
72 73 74
•
• R7.00mm (.276”)
Tan 15°-94°
R7.00mm (.276”) • R2.00mm (.079”)
Tan 15°-94° Tan 20°-94°
• 15°- 4.19mm (.165”) • 15°- 6.42mm (.253”) • 20°- 4.00mm (.157”)
75 76 77
•
• •
•
• •
DIRECT
NORTH AMERICA: Tel: +1 (760) 233-0067 - Order Toll Free (USA and CANADA): 1-800-639-3693 21
FRANCE: Tel: +33 (0)4-50-25-87-82 - Fax: +33 (0)4-50-97-64-93
RADIUS
81 82 83
84 85 86
87 88 89
• R6.00mm (.236”)
• R4.50mm (.177”) • R5.00mm (.197”) Tan 0°-94°
Tan 0°-94° Tan 0°-94°
• R6.35mm (.250”)
• R8.50mm (.335”)
Tan 0°-94° Tan 0°-94°
• R7.00mm (.276”)
Tan 0°-94°
93
• R27.00mm (1.063”)
Tan 70°-90°
WA1-NWN2015
DIRECT
NORTH AMERICA: Tel: +1 (760) 233-0067 - Order Toll Free (USA and CANADA): 1-800-639-3693 23
FRANCE: Tel: +33 (0)4-50-25-87-82 - Fax: +33 (0)4-50-97-64-93
SINGLE ANGLE
94 95 96
•
• 5°- 9.84mm (.387”) • 10°- 9.80mm (.386”) 15°- 8.50mm (.335”)
97 98 99
•
• 20°- 8.20mm (.323”) • 25°- 10.43mm (.411”)
20.25°- 8.38mm (.330”)
• •
30°- 9.00mm (.354”) • 30.25°- 10.9mm (.429”) 31°- 10.45mm (.412”)
•
•
• 37°- 9.30mm (.366”) 37.50°- 9.20mm (.362”)
35°- 9.50mm (.374”)
•
• •
45°- 8.90mm (.350”)
38°- 9.10mm (.358”) 39°- 9.00mm (.354”)
NORTH AMERICA: Tel: +1 (760) 233-0067 - Order Toll Free (USA and CANADA): 1-800-639-3693 25
FRANCE: Tel: +33 (0)4-50-25-87-82 - Fax: +33 (0)4-50-97-64-93
SINGLE ANGLE
112 113 114
•
•
•
60°- 8.40mm (.331”)
52°- 8.55mm (.337”) 55°- 8.55mm (.337”)
•
•
•
70°- 16.80mm (.661”)
67°- 8.40mm (.331”) 70°- 7.75mm (.305”)
•
75°- 16.40mm (.646”)
• •
78°- 7.30mm (.287”)
• •
127 128
• Chamfer best
for Cast Iron WA1-NWN91-16 WB4-NWN90-20
applications
NORTH AMERICA: Tel: +1 (760) 233-0067 - Order Toll Free (USA and CANADA): 1-800-639-3693 27
FRANCE: Tel: +33 (0)4-50-25-87-82 - Fax: +33 (0)4-50-97-64-93
NWN-HP
NEWEN® High Performance carbide form tip package (7 carbide form tips). Includes one each of the
following carbide form tip:
NWN-JM
NEWEN® Japanese Motorcycle carbide form tip package (5 carbide form tips). Includes one each of
the following carbide form tip:
NWN-HD
NEWEN® Harley Davidson carbide form tip package (3 carbide form tips). Includes one each of the
following carbide form tip:
NWN-AD
NEWEN® Automotive & Diesel carbide form tip package (20 carbide form tips). Includes one each of
the following carbide form tip:
Date:
Designed by:
Approved by:
Material:
Relief Angle:
Quantity:
segment no.
Delta X length angle RaDius
mm or inch mm or inch
tan (β1°) tan (β2°)
degree mm or inch
NORTH AMERICA: Tel: +1 (760) 233-0067 - Order Toll Free (USA and CANADA): 1-800-639-3693 29
FRANCE: Tel: +33 (0)4-50-25-87-82 - Fax: +33 (0)4-50-97-64-93
From: Tel: Country City
Code: Code:
Fax: Country City
Code: Code:
Email:
Website:
Date:
Designed by:
Approved by:
Material:
Relief Angle:
Quantity:
segment no.
Delta X length angle RaDius
mm or inch mm or inch
tan (β1°) tan (β2°)
degree mm or inch
Date:
Designed by:
Approved by:
Material:
Relief Angle:
Quantity:
NORTH AMERICA: Tel: +1 (760) 233-0067 - Order Toll Free (USA and CANADA): 1-800-639-3693 31
FRANCE: Tel: +33 (0)4-50-25-87-82 - Fax: +33 (0)4-50-97-64-93
From: Tel: Country City
Code: Code:
Fax: Country City
Code: Code:
Email:
Website:
Date:
Designed by:
Approved by:
Material:
Relief Angle:
Quantity:
segment no.
Delta X length angle RaDius
mm or inch mm or inch
tan (β1°) tan (β2°)
degree mm or inch
Date:
Designed by:
Approved by:
Material:
Relief Angle:
Quantity:
segment no.
Delta X length angle RaDius
mm or inch mm or inch
tan (β1°) tan (β2°)
degree mm or inch
NORTH AMERICA: Tel: +1 (760) 233-0067 - Order Toll Free (USA and CANADA): 1-800-639-3693 33
FRANCE: Tel: +33 (0)4-50-25-87-82 - Fax: +33 (0)4-50-97-64-93
From: Tel: Country City
Code: Code:
Fax: Country City
Code: Code:
Email:
Website:
Date:
Designed by:
Approved by:
Material:
Relief Angle:
Quantity:
segment no.
Delta X length angle RaDius
mm or inch mm or inch
tan (β1°) tan (β2°)
degree mm or inch
Date:
Designed by:
Approved by:
Material:
Relief Angle:
Quantity:
segment no.
Delta X length angle RaDius
mm or inch mm or inch degree
tan (β1°) tan (β2°) mm or inch
NORTH AMERICA: Tel: +1 (760) 233-0067 - Order Toll Free (USA and CANADA): 1-800-639-3693 35
FRANCE: Tel: +33 (0)4-50-25-87-82 - Fax: +33 (0)4-50-97-64-93
™
5 Total flexibility
offered with
NWN-3a-CAD™
Tool Boxes.
NORTH AMERICA: Tel: +1 (760) 233-0067 - Order Toll Free (USA and CANADA): 1-800-639-3693 37
FRANCE: Tel: +33 (0)4-50-25-87-82 - Fax: +33 (0)4-50-97-64-93
Legend: • Stock NORTH AMERICA • Non-stock
mm inch mm inch mm inch mm inch mm inch mm inch
3.96 0.1559 4.64 0.1827 5.32 0.2095 5.99 0.2359 6.67 0.2626 7.35 0.2894
Lead time
3.97 0.1563 4.65 0.1831 5.33 0.2099 6.00 0.2363 6.68 0.2630 7.36 0.2898
for
3.98 0.1567 4.66 0.1835 5.34 0.2102 6.01 0.2367 6.69 0.2634 7.37 0.2902
non-stock
3.99 0.1571 4.67 0.1839 5.35 0.2106 6.02 0.2371 6.70 0.2638 7.38 0.2906
items:
4.00 0.1575 4.68 0.1843 5.36 0.2110 6.03 0.2375 6.71 0.2642 7.39 0.2910
1 week
4.01 0.1579 4.69 0.1847 5.37 0.2114 6.04 0.2379 6.72 0.2646 7.40 0.2913
from date
4.02 0.1583 4.70 0.1851 5.38 0.2118 6.05 0.2383 6.73 0.2650 7.41 0.2917
of order
4.03 0.1587 4.71 0.1855 5.39 0.2122 6.06 0.2387 6.74 0.2654 7.42 0.2921
4.04 0.1591 4.72 0.1858 5.40 0.2126 6.07 0.2340 6.75 0.2658 7.43 0.2925
4.05 0.1595 4.73 0.1862 5.41 0.2130 6.08 0.2394 6.76 0.2662 7.44 0.2929
4.06 0.1599 4.74 0.1866 5.42 0.2134 6.09 0.2398 6.77 0.2666 7.45 0.2933
4.07 0.1602 4.75 0.1870 5.43 0.2138 6.10 0.2402 6.78 0.2669 7.46 0.2937
4.08 0.1606 4.76 0.1874 5.44 0.2142 6.11 0.2406 6.79 0.2673 7.47 0.2941
4.09 0.1610 4.77 0.1878 5.45 0.2146 6.12 0.2410 6.80 0.2677 7.48 0.2944
4.10 0.1614 4.78 0.1882 5.46 0.2150 6.13 0.2413 6.81 0.2681 7.49 0.2949
4.11 0.1618 4.79 0.1886 5.47 0.2154 6.14 0.2417 6.82 0.2685 7.50 0.2953
4.12 0.1622 4.80 0.1890 5.48 0.2157 6.15 0.2421 6.83 0.2689 7.51 0.2957
4.13 0.1626 4.81 0.1894 5.49 0.2161 6.16 0.2425 6.84 0.2693 7.52 0.2961
4.14 0.1630 4.82 0.1898 5.50 0.2165 6.17 0.2429 6.85 0.2697 7.53 0.2965
4.15 0.1634 4.83 0.1902 5.51 0.2169 6.18 0.2433 6.86 0.2701 7.54 0.2969
4.16 0.1638 4.84 0.1906 5.52 0.2173 6.19 0.2437 6.87 0.2705 7.55 0.2972
4.17 0.1642 4.85 0.1910 5.53 0.2177 6.20 0.2441 6.88 0.2709 7.56 0.2976
4.18 0.1646 4.86 0.1914 5.54 0.2181 6.21 0.2445 6.89 0.2713 7.57 0.2980
4.19 0.1650 4.87 0.1918 5.55 0.2185 6.22 0.2449 6.90 0.2717 7.58 0.2984
4.20 0.1654 4.88 0.1921 5.56 0.2189 6.23 0.2453 6.91 0.2721 7.59 0.2988
4.21 0.1658 4.89 0.1925 5.57 0.2193 6.24 0.2457 6.92 0.2724 7.60 0.2992
4.22 0.1662 4.90 0.1929 5.58 0.2197 6.25 0.2461 6.93 0.2728 7.61 0.2996
4.23 0.1666 4.91 0.1933 5.59 0.2201 6.26 0.2465 6.94 0.2732 7.62 0.3000
4.24 0.1670 4.92 0.1937 5.60 0.2205 6.27 0.2469 6.95 0.2736 7.63 0.3004
4.25 0.1674 4.93 0.1941 5.61 0.2209 6.28 0.2473 6.96 0.2740 7.64 0.3008
4.26 0.1678 4.94 0.1945 5.62 0.2213 6.29 0.2476 6.97 0.2744 7.65 0.3012
4.27 0.1682 4.95 0.1949 6.30 0.2480 6.98 0.2748 7.66 0.3016
5.63 0.2217
4.28 0.1686 4.96 0.1953 6.31 0.2484 6.99 0.2752 7.67 0.3020
5.64 0.2221
4.29 0.1690 4.97 0.1957 6.32 0.2488 7.00 0.2756 7.68 0.3024
5.65 0.2225
4.30 0.1694 4.98 0.1961 6.33 0.2492 7.01 0.2760 7.69 0.3028
5.66 0.2228
4.31 0.1697 4.99 0.1965 6.34 0.2496 7.02 0.2764 7.70 0.3032
5.67 0.2232
4.32 0.1701 5.00 0.1969 6.35 0.2500 7.03 0.2768 7.71 0.3035
5.68 0.2236
4.33 0.1705 5.01 0.1972 6.36 0.2504 7.04 0.2772 7.72 0.3039
5.69 0.2240
4.34 0.1709 5.02 0.1976 6.37 0.2508 7.05 0.2776 7.73 0.3043
5.70 0.2244
4.35 0.1713 5.03 0.1980 6.38 0.2512 7.06 0.2780 7.74 0.3047
5.71 0.2248
4.36 0.1717 5.04 0.1984 6.39 0.2516 7.07 0.2784 7.75 0.3051
5.72 0.2252 6.40 0.2519 7.76 0.3055
4.37 0.1721 5.05 0.1988 7.08 0.2788
5.73 0.2256 6.41 0.2524 7.77 0.3059
4.38 0.1725 5.06 0.1992 7.09 0.2791
5.07 0.1996 5.74 0.2260 6.42 0.2528 7.78 0.3063
4.39 0.1729 7.10 0.2795
4.40 0.1733 5.08 0.2000 5.75 0.2264 6.43 0.2532 7.79 0.3067
5.76 0.2268 7.11 0.2799
4.41 0.1737 5.09 0.2004 6.44 0.2536 7.12 0.2803 7.80 0.3071
4.42 0.1741 5.10 0.2008 5.77 0.2272 6.45 0.2540 7.81 0.3075
5.78 0.2276 7.13 0.2807
4.43 0.1745 5.11 0.2012 6.46 0.2543 7.14 0.2811 7.82 0.3079
4.44 0.1748 5.12 0.2016 5.79 0.2280 6.47 0.2547 7.83 0.3083
5.80 0.2284 7.15 0.2815
4.45 0.1752 5.13 0.2020 6.48 0.2551 7.16 0.2819 7.84 0.3087
4.46 0.1756 5.14 0.2024 5.81 0.2288 6.49 0.2555 7.85 0.3091
5.82 0.2291 7.17 0.2823
4.47 0.1760 5.15 0.2028 6.50 0.2559 7.18 0.2827 7.86 0.3095
4.48 0.1764 5.16 0.2032 5.83 0.2295 6.51 0.2563 7.87 0.3099
7.19 0.2831
4.49 0.1768 5.17 0.2036 5.84 0.2299 6.52 0.2567 7.88 0.3103
7.20 0.2835
4.50 0.1772 5.18 0.2040 5.85 0.2303 6.53 0.2571 7.89 0.3107
7.21 0.2839
4.51 0.1776 5.19 0.2044 5.86 0.2307 6.54 0.2575 7.90 0.3111
7.22 0.2843
4.52 0.1780 5.20 0.2047 5.87 0.2311 6.55 0.2579 7.91 0.3115
7.23 0.2847
4.53 0.1784 5.21 0.2051 5.88 0.2315 6.56 0.2583 7.92 0.3119
7.24 0.2850
4.54 0.1788 5.22 0.2055 5.89 0.2319 6.57 0.2587 7.93 0.3123
7.25 0.2854
4.55 0.1791 5.23 0.2059 5.90 0.2323 6.58 0.2591 7.94 0.3127
7.26 0.2858
4.56 0.1795 5.24 0.2063 5.91 0.2327 6.59 0.2594 7.95 0.3131
7.27 0.2862
4.57 0.1799 5.25 0.2067 5.92 0.2331 6.60 0.2598 7.96 0.3135
7.28 0.2866
4.58 0.1803 5.26 0.2071 5.93 0.2335 6.61 0.2602 7.97 0.3139
7.29 0.2870
4.59 0.1807 5.27 0.2075 5.94 0.2339 6.62 0.2606 7.98 0.3143
7.30 0.2874
4.60 0.1811 5.28 0.2079 5.95 0.2343 6.63 0.2610 7.99 0.3147
7.31 0.2878
4.61 0.1815 5.29 0.2083 5.96 0.2347 6.64 0.2614 8.00 0.3151
7.32 0.2882
4.62 0.1819 5.30 0.2087 5.97 0.2351 6.65 0.2319 8.01 0.3155
7.33 0.2886
4.63 0.1823 5.31 0.2091 5.98 0.2355 6.66 0.2622 8.02 0.3159
7.34 0.2890
NORTH AMERICA: Tel: +1 (760) 233-0067 - Order Toll Free (USA and CANADA): 1-800-639-3693 39
FRANCE: Tel: +33 (0)4-50-25-87-82 - Fax: +33 (0)4-50-97-64-93
NWN-PLT/IA
NEWEN® Import Automotive carbide pilot package (12 pilots). Includes one each of the following
pilots:
5.48mm (.2157”), 5.50mm (.2165”), 6.58mm (.2591”), 6.60mm (.2598”), 6.98mm (.2748”), 7.00mm
(.2756”), 7.98mm (.3142”), 8.00mm (.3150”), 8.01mm (.3154”), 8.03mm (.3161”), 8.98mm (.3535”)
and 9.00mm (.3543”).
NWN-PLT/DA
NEWEN® Domestic Automotive carbide pilot package (12 pilots). Includes one each of the following
pilots:
7.89mm (.3106”), 7.91mm (.3114”), 7.93mm (.3122”), 8.05mm (.3169”), 8.06mm (.3173”), 8.69mm
(.3421”), 8.70mm (.3425”), 8.71mm (.3429”), 9.45mm (.3720”), 9.47mm (.3728”), 9.49mm (.3736”)
and 9.51mm (.3744”).
NWN-PLT/D
NEWEN® Diesel carbide pilot package (8 pilots). Includes one each of the following pilots:
6.34mm (.2496”), 6.36mm (.2504”), 11.08mm (.4362”), 11.10mm (.4370”), 11.47mm (.4516”),
11.49mm (.4529”), 12.68mm (.4992”) and 12.70mm (.5000”).
NWN-PLT/HD
NEWEN® Harley-Davidson carbide pilot package (11 pilots). Includes one each of the following pilots:
7.89mm (.3106”), 7.90mm (.3110”), 7.92mm (.3118”), 8.67mm (.3413”), 8.69mm (.3421”), 8.71mm
(.3429”), 9.55mm (.3760”), 9.57mm (.3768”), 9.59mm (.3776”), 9.61mm (.3783”) and 9.63mm
(.3791”).
NWN-PLT/JM
NEWEN® Japanese Motorcycle carbide pilot package (17 pilots). Includes one each of the following
pilots:
3.99mm (.1571”), 4.00mm (.1575”), 4.49mm (.1769”), 4.50mm (.1772”), 4.99mm (.1965”), 5.00mm
(.1969”), 5.48mm (.2157”), 5.49mm (.2161”), 5.50mm (.2165”), 5.99,mm (.2358”), 6.00mm (.2362”),
6.59mm (.2594”), 6.60mm (.2598”), 6.99mm (.2752”), 7.00mm (.2756”), 7.99mm (.3146”) and
8.00mm (.3150”).
H C Inch
.1181 to
.2362
+ .00048
+0
.2362 to
.3937
+ .0006
+0
Hauteur
Overall H7
D mm 3 to 6 + 0.012 6 to 10 + 0.015
length
de siègeof +0 +0
profile to be
àmachined
usiner Inch
.1181 to +.00032 .2362 to +.00036
.2362 +0 .3937 +0
H6
3 to 6 + 0.008 6 to 10 + 0.009
mm
+0 +0
Reaming of guide will be done from the valve seat side _____ or from the
back side of the cylinder head _____ (reaming from the back side requires a
shorter reamer and thus guarantying better results).
Please, fill out table below with geometric dimensions of your cylinder head:
F
A B C
E F G
H W
Make: Company:
Contact:
Model
Address:
Engine Type: Address:
Address:
Address:
Year: Country:
Tel:
Guide Material: Fax:
Email:
NORTH AMERICA: Tel: +1 (760) 233-0067 - Order Toll Free (USA and CANADA): 1-800-639-3693 41
FRANCE: Tel: +33 (0)4-50-25-87-82 - Fax: +33 (0)4-50-97-64-93
NWN2000 NWN2001 NWN2002
Tip Holder, Diameter Range: Tip Holder, Diameter Range: Tip Holder, Diameter Range:
18-30mm (0.709”- 1.181”). 28-42mm (1.102”-1.653”). 40-60mm (1.575”-2.362”).
•Fits NWN5100F, NWN5100F-L1, •Fits NWN5100F, NWN5100F-L1, •Fits NWN5100F, NWN5100F-L1,
NWN5100F-L2 tool holders, NWN5100F-L2 tool holders, NWN5100F-L2 tool holders,
(100% compatible with Serdi tool (100% compatible with Serdi tool (100% compatible with Serdi
holders) and small body Ball Heads holders) and small body Ball Heads tool holders) and small body Ball
sold on the market. sold on the market. Heads sold on the market.
•HOLD
POSITIONING
SCREW WITH
PRE-SET TIP HOLDERS FOR YOUR THREAD LOCK
ONCE POSTION-
MOST COMMON HEADS AND: ING OF TOOL
HAS BEEN
• Save time CALCULATED
WITH
• Keep job quality consistent over
NWN-3a-CAD™
time •DEDICATED
• Prolong tips and tip holders life CARBIDE TIP
• Minimize tooling wear PROFILE
• Increase profitability
•T8 TORX SCREW
NWN-THR6
Tip holder kit. Includes:
• Any 6 tip-holders of your choice*
• Any 6 stock WA1-NWN** high performance
carbide tips of your choice.
•6 T8 torx screws.
•1 Bench top/wall mount rack & 10 labels (ac-
commodates up to 20 tip-holders).
NWN-THR12
Tip holder kit. Includes:
• Any 12 tip-holders of your choice*
• Any 12 stock WA1-NWN** high performance
carbide tips of your choice.
•12 T8 torx screws.
•1 Bench top/wall mount rack & 10 labels (ac-
commodates up to 20 tip-holders).
NWN-THR20
Tip holder kit. Includes:
• Any 20 tip-holders of your choice*
• Any 20 stock WA1-NWN** high performance
carbide tips of your choice.
•20 T8 torx screws.
•1 Bench top/wall mount rack & 10 labels (ac-
NWN-THR20 commodates up to 20 tip-holders).
NOTE: 1. Additional carbide tips and/or custom tips may be ordered or special ordered. 2. All parts from kit may
also be purchased separately.
NORTH AMERICA: Tel: +1 (760) 233-0067 - Order Toll Free (USA and CANADA): 1-800-639-3693 43
FRANCE: Tel: +33 (0)4-50-25-87-82 - Fax: +33 (0)4-50-97-64-93
NWN2002-CBN-15 NWN2002-CBN-20 NWN2002-CBN-30
15.25° Single Angle Tip Holder, 20.25° Single Angle Tip Holder, 30.25° Single Angle Tip Holder,
Diameter Range: Diameter Range: Diameter Range:
40-60mm (1.575”-2.362”). 40-60mm (1.575”-2.362”). 40-60mm (1.575”-2.362”).
•Fits NWN5100F, NWN5100F-L1, •Fits NWN5100F, NWN5100F-L1, •Fits NWN5100F, NWN5100F-L1,
NWN5100F-L2 tool holders, NWN5100F-L2 tool holders, NWN5100F-L2 tool holders,
(100% compatible with Serdi tool (100% compatible with Serdi tool (100% compatible with Serdi tool
holders) and small body Ball Heads holders) and small body Ball Heads holders) and small body Ball Heads
sold on the market. sold on the market. sold on the market.
NWN2002-CBN-45 NWN-BN200
45.25° Single Angle Tip Holder, Universal Single Angle CBN cutter.
Diameter Range: High Grade CBN for Hard Applica-
40-60mm (1.575”-2.362”). tions (stellites, Powder Metals,
•Fits NWN5100F, NWN5100F-L1, Induction Hardened Materials...)
NWN5100F-L2 tool holders, •Fits NWN2002-CBN-15,
(100% compatible with Serdi tool NWN2002-CBN-20,
holders) and small body Ball Heads NWN2002-CBN-30,
sold on the market. NWN2002-CBN45 Tip Holders.)
DIRECT.COM
Order by 4.00pm PST,
We Ship Same Day!
NWN2003-CBN-45 NWN-BN300
45.25° Single Angle Tip Holder, Universal Single Angle CBN cutter.
Diameter Range: High Grade CBN for Hard Applica-
40-60mm (1.575” -2.362”). tions (stellites, Powder Metals,
NWN2004-CBN-45 Induction Hardened Materials...)
45.25° Single Angle Tip Holder, •Fits NWN2003-CBN-15,
Diameter Range: NWN2003-CBN-20,
58-80mm (3.071” -4.724”). NWN2003-CBN-30,
•Fits NWN5300, NWN5300-L1 tool NWN2003-CBN45 Tip Holders.)
holders,
(100% compatible with Serdi tool
holders and wide body Ball Heads
sold on the market).
DIRECT
NORTH AMERICA: Tel: +1 (760) 233-0067 - Order Toll Free (USA and CANADA): 1-800-639-3693 45
FRANCE: Tel: +33 (0)4-50-25-87-82 - Fax: +33 (0)4-50-97-64-93
NWN5100F NWN5100F-L1 NWN5100F-L2
Tool-Holder, Capacity: 18-60mm Tool-Holder, 1”longer than Tool-Holder, 2”longer than
(0.709”-2.362”). NWN5100F. NWN5100F.
•Uses tip holders NWN2000, Capacity: 18-60mm (0.709”-2.362”) Capacity: 18-60mm (0.709”-2.362”)
NWN2001 & NWN2002. Used on •Uses tip holders NWN2000, •Uses tip holders NWN2000,
NEWEN® & Serdi (with the NWN2001 & NWN2002. Used on NWN2001 & NWN2002. Used on
exception of the Serdi Light/Pro & NEWEN® & Serdi (with the NEWEN® & Serdi (with the exception
Micro) seat & guide machines. exception of the Serdi Light/Pro & of the Serdi Light/Pro & Micro) seat
Micro) seat & guide machines. & guide machines.
NWN5300 NWN5300-L1
Tool-Holder, Capacity: 40-120mm Tool-Holder, 1” longer than
(2.285”-3.150”). NWN5300. Capacity: 40-120mm NWN-TCF
•Uses tip holders NWN2003, (2.285”-3.150”). NEWEN® tool clamping fixture
NWN2004, NWN2005, •Uses tip holders NWN2003, for collet chuck holder & other
NWN2003-CBN-15, NWN2004, NWN2005, NEWEN® ISO 30 tool holders.
NWN2003-CBN-20, NWN2003-CBN-15,
NWN2003-CBN-30, NWN2003-CBN-20,
NWN2003-CBN-45. Used on NWN2003-CBN-30,
NEWEN® & Serdi (with the exception NWN2003-CBN-45. Used on
of the Serdi Light/Pro & Micro) seat & NEWEN® & Serdi (with the exception
guide machines. of the Serdi Light/Pro & Micro) seat &
guide machines.
NORTH AMERICA: Tel: +1 (760) 233-0067 - Order Toll Free (USA and CANADA): 1-800-639-3693 47
FRANCE: Tel: +33 (0)4-50-25-87-82 - Fax: +33 (0)4-50-97-64-93
NWN-ER32SW NWN-ER32CN
ER-32 spanner wrench. ER-32 clamping nut.
NWN-ER32SC NWN-ER20SC
ER-32 spring collet - sizes ER-20 spring collet - sizes
available: available:
3/32” (2-3mm), 1/8” (3-4mm), 1/8” (3-4mm), 3/16” (4-5mm),
3/16” (4-5mm), 7/32” (5-6mm), 7/32” (5-6mm), 1/4” (6-7mm),
1/4” (6-7mm), 5/16” (7-8mm), 5/16” (7-8mm), 11/32” (8-9mm),
11/32” (8-9mm), 3/8” (9-10mm), 3/8” (9-10mm), 13/32” (10-
13/32” (10-11mm), 7/16” (11-12mm), 11mm), 7/16” (11-12mm) and
1/2” (12-13mm), 17/32” (13-14mm), 1/2” (12-13mm).
9/16” (14-15mm), 5/8” (15-16mm),
21/32” (16-17mm),
11/16” (17-18mm),
3/4” (18-19mm) and 25/32”
(19-20mm).
NWN-9CCS
ER-32 collet chuck, ER-32 clamping nut, ER-32 spanner wrench, tool clamping fixture & (9) ER-32 collets (1/4”, 5/16”,
3/8”, 7/16”, 11/32”, 9/16”, 5/8”, 11/16” & 3/4”).
NWN-CCTAS
ER-32 collet chuck and tapping attachment; includes: (1) NWN-9CCS and (1) NWN-TA.
NORTH AMERICA: Tel: +1 (760) 233-0067 - Order Toll Free (USA and CANADA): 1-800-639-3693 49
FRANCE: Tel: +33 (0)4-50-25-87-82 - Fax: +33 (0)4-50-97-64-93
FIXED CUTTERS are conceived and designed for valve seat
counterboring. All geometrical and dimensional features are met.
Those indexable fixed cutters use two replaceable titanium nitrate
coated inserts, each with four cutting edges. Each fixed cutter
comes with two inserts and one torx wrench (replacement inserts
and screws available).
DIRECT
NORTH AMERICA: Tel: +1 (760) 233-0067 - Order Toll Free (USA and CANADA): 1-800-639-3693 51
FRANCE: Tel: +33 (0)4-50-25-87-82 - Fax: +33 (0)4-50-97-64-93
NWN-PCG/MM NWN-PCG/IN NWN-TSFA
NEWEN® puppitast concentricity NEWEN® puppitast concentricity High precision tool setting fixture with
gauge (mm). gauge (inch). interchangeable point.
Graduation / Accuracy: 0.01mm Graduation / Accuracy: .0005”
Range: 1mm. Range: .03”.
NWN-TLEVEL SM374
Adjustable high precision valve guide Bull’s eye level.
level.
NWN-PCSM/IN
NWN-PCSM/MM
Precision counterboring setting
micrometer.
NORTH AMERICA: Tel: +1 (760) 233-0067 - Order Toll Free (USA and CANADA): 1-800-639-3693 53
FRANCE: Tel: +33 (0)4-50-25-87-82 - Fax: +33 (0)4-50-97-64-93
NWN-SNTA NWN-CM3 NWN-CM4
Drive adaptor for Sunnen, Tobin Arp & # 3 morse taper adaptor (commonly # 4 morse taper (Kwik-Way,
Berco machines. used on Winona Van Norman, Winona Van Norman....seat &
Peterson, Kwik-Way, Zan Rosso guide
seat & guide machines).
NWN-3/4SS
3/4” straight shank adaptor (commonly
used on DCM machines, vertical mills
(bridgeport...).
DIRECT
NWN-BH437F
Ball head, diameter .437” (11.10mm) for
Kwik-Way pilots (uses tip holders, NWN2000,
NWN2001 & NWN2002).
NWN-BH375W
Wide Body Ball head,
diameter .375” (9.52mm) for Mira,
Serdi, K.O. Lee, Snap On, Neway,
Winona, Peterson, Kwik-Way &
NEWEN® pilots (uses tip holders,
NWN2003, NWN2004 , NWN2005,
NWN2003-CBN-15, NWN2003-CBN-20,
NWN2003-CBN-30,
NWN2003-CBN-45).
NWN-BH385W
Wide Body Ball head,
diameter .385” (9.78mm) for Sioux
pilots (uses tip holders, NWN2003,
NWN2004, NWN2005,
NWN2003-CBN-15, NWN2003-CBN-20,
NWN2003-CBN-30,
NWN2003-CBN-45).
DIRECT
NORTH AMERICA: Tel: +1 (760) 233-0067 - Order Toll Free (USA and CANADA): 1-800-639-3693 55
FRANCE: Tel: +33 (0)4-50-25-87-82 - Fax: +33 (0)4-50-97-64-93
NWN-SSS NWN-SSL
Set of 3 small stainless steel springs. Set of 4 large stainless steel springs.
NWN-BS
Brass bushing set (6mm ID, 7mm ID, 8mm
ID, 9mm ID, 10mm ID, 11mm ID and 3/8” ID).
For use with NEWEN® springs.
DIRECT
NMS-MKIT
Complete D.I.Y.™
maintenance kit for
Serdi 50, 60, 100,
101 & 110. Includes
step by step manual
NMS1000 with text and
Pneumatic control switch. drawings.
(Serdi ref. S.1718).
NORTH AMERICA: Tel: +1 (760) 233-0067 - Order Toll Free (USA and CANADA): 1-800-639-3693 57
FRANCE: Tel: +33 (0)4-50-25-87-82 - Fax: +33 (0)4-50-97-64-93
NMS1304 NMS1305 NMS1306 NMS1307
External bolt & piston O-Ring Internal piston Sphere pivot O-Ring - Ma- Sphere paper gasket (set of
(Serdi ref. S.0418). O-Ring - Machine head. chine head. 8 gaskets) - Machine feet.
(Serdi ref. S.1212). (Serdi ref. S.1208).