Professional Documents
Culture Documents
Revision L 2: Specifications
Page 18 of 144
In ordering all collar-type and 18° type BJ elevators for drill pipe, casing and tubing, first
determine correct pipe size and corresponding elevator frame part number from
specification tables on these pages.
Then determine correct bore code from bore charts on this and the following pages.
Add this number to the frame part number for the complete elevator.
Note that the bore diagrams give bores for all BJ elevators other than BJ 18° elevators.
18° taper elevator
A
Drill pipe
OD Tooljoint
OD Upset
OD Pipe
www.nov.com
Document number 50000815-MAN-001
2: Specifications
Revision L
Page 19 of 144
www.nov.com
Document number 50000815-MAN-001
Revision L 2: Specifications
Page 20 of 144
www.nov.com