Professional Documents
Culture Documents
com
CNC Machining Technology
Volume I
Design, Development and elM Strategies
www.EngineeringBooksPdf.com
Graham T. Smith
CNC Machining
Technology
Volume I
Design, Development and
elM Strategies
With 83 Figures
Springer-Verlag
London Berlin Heidelberg New York
Paris Tokyo Hong Kong
Barcelona Budapest
www.EngineeringBooksPdf.com
Graham T. Smith
Technology Research Centre, Southampton Institute,
City Campus, East Park Terrace, Southampton S09 4WW,
UK
Cover illustration: Ch.l, Fig.46. An application of a rotary inductosyn.
ISBN-13:978-3-540-19828-4 e-ISBN-13:978-1-4471-2051-3
DOl: 10.1007/978-1-4471-2051-3
Apart from any fair dealing for the purposes of research or private study, or
criticism or review, as permitted under the Copyright, Designs and Patents Act
1988, this publication may only be reproduced, stored or transmitted, in any
form or by any means, with the prior permission in writing of the publishers,
or in the case of reprographic reproduction in accordance with the terms of
licences issued by the Copyright Licensing Agency. Enquiries concerning
reproduction outside those terms should be sent to the publishers.
www.EngineeringBooksPdf.com
To my grandfather
Mr T. W. Chandler
who encouraged me
to take an interest
in all things
www.EngineeringBooksPdf.com
ro<por ANHP 0 ES /,MAr
JIE!PAr ,d!,dArKOMENOr
rO<POTATOr ,dE 0 EK
THr TQN AAAQN
Translation:
PLATO 428-348 Be
www.EngineeringBooksPdf.com
Contents
2.1 Introduction............................. 65
2.2 The Importance of "Logistics" in a Flexible Manufacturing
Environment, its Feasibility and Simulation during the
Development . . . . . . . . . . . . . . . . . . . . . . . . . . .. 66
2.3 Flexible Manufacturing Cell and System
Configurations. . . . . . . . . . . . . . . . . . . . . . . . . .. 80
2.4 Condition Monitorings of Intended Plant: FMc/S and
CIM Installations. . . . . . . . . . . . . . . . . . . . . . . . .. 97
2.5 The Monitoring Systems Necessary for High Part
Quality During Untended Machining . . . . . . . . . . .. 100
2.6 Automated Auxiliary Equipment to Ensure Accurate
Quality Assurance in an FMc/S Facility . . . . . . . . .. 108
2.7 Computer Integrated Manufacture (CIM) in the
Automated Factory - a Case Study. . . . . . . . . . . . .. 110
2.8 Present and Future Trends in Turning and Machining
Centre Development . . . . . . . . . . . . . . . . . . . . . .. 123
www.EngineeringBooksPdf.com
viii Contents
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175
www.EngineeringBooksPdf.com
Preface
www.EngineeringBooksPdf.com
x Preface
Graham T. Smith
West End
Southampton
January 1993
www.EngineeringBooksPdf.com
Chapter 1
The Development and Design of
CNC Machine Tools
The highly sophisticated CNC machine tools of today, in the vast and diverse range
found throughout the field of manufacturing processing, started from very humble
beginnings in a number of the major industrialized countries. Some of the earliest
research and development work in this field was completed in the USA and a mention
will be made of the UK's contribution to this numerical control development.
A major problem occurred just after the Second World War, in that progress in all
areas of military and commercial development had been so rapid that the levels of
automation and accuracy required by the modern industrialized world could not be
attained from the labour intensive machines in use at that time. The question was how
to overcome the disadvantages of conventional plant and current manning levels. It is
generally acknowledged that the earliest work into numerical control was the study
commissioned in 1947 by the US government. The study's conclusion was that the
metal cutting industry throughout the entire country could not cope with the de-
mands of the American Air Force, let alone the rest of industry! As a direct result of
the survey, the US Air Force contracted the Parsons Corporation to see if they could
develop a flexible, dynamic, manufacturing system which would maximise produc-
tivity. The Massachusetts Institute of Technology (MIT) was sub-contracted into this
research and development by the Parsons Corporation, during the period 1949-1951,
and jointly they developed the first control system which could be adapted to a wide
range of machine tools. The Cincinnati Machine Tool Company converted one of their
standard 28 inch "Hydro-Tel" milling machines to a three-axis "automatic" milling
machine for this contract, having removed the contouring equipment. This machine
made use of a servo-mechanism for the drive system on the axes, which controlled the
table positioning, cross-slide and spindle head. The machine can be classified as the
first truly three axis continuous path machine tool and it was able to generate a required
shape, or curve, by simultaneous slideway motions, if necessary.
At about the same time as these American advances in machine tool control were
taking place, Alfred Herbert Limited in the United Kingdom had their first NC
www.EngineeringBooksPdf.com
2 CNC Machining Technology
machine tool operating, although Ferranti Limited produced a more reliable con-
tinuous path control system which became available in 1956. Over the next few
years in both the USA and Europe, further development work occurred. These early
numerical control developments were principally for the aerospace industry, where it
was necessary to cut complex geometric shapes such as airframe components and
turbine blades. In parallel with this development of sophisticated control systems for
aerospace requirements, a point-to-point controller was developed for more general
machining applications. These less sophisticated point-to-point machines were con-
siderably cheaper than their more complex continuous path cousins and were used
when only positional accuracy was necessary. As an example of point-to-point motion
on a machine tool for drilling operations, the typical movement might be: fast traverse
of the workpiece under the drill's spindle and after drilling the hole, another rapid
move takes place to the next hole's position - after retraction of the drill, of course.
The rapid motion of the slideways could be achieved by each axis in a sequential and
independent manner, or simultaneously, if a separate control was utilised for each
axis. The former method of table travel was less costly, whereas the latter was faster in
operation. With these early point-to-point machines the path taken between two
points was generally unimportant, but it was essential to avoid any backlash in the
system to obtain the required degree of positional accuracy and so it was necessary
that the approach direction to the next point was always the same. The earliest
examples of these cheaper point-to-point machines usually did not use recirculating
ball screws; this meant that the motions would be sluggish, and slideways would
inevitably suffer from backlash, but more will be said about this topic later in the
chapter.
The early NC machines were, in the main, based upon a modified milling machine,
with this concept of control being utilised on turning, punching, grinding and a whole
host of other machine tools later. Towards the end of the 1950s, hydrostatic slideways
were often incorporated for machine tools of higher precision, which to some extent
overcame the stiction problem associated with conventional slideway response, whilst
the technique of averaging-out slideway inaccuracy brought about a much increased
precision in the machine tool and improved their control characteristics.
The concept of the "machining centre" was the product of this early work, as it
allowed the machine to manufacture a range of components using a wide variety
of machining processes at a single set-up, without transfer of workpieces to other
machine tools. A machining centre differed conceptually in its design from that of a
milling machine, in that the cutting tools could be changed automatically by the
transfer mechanism, or selector, from the magazine to spindle, or vice versa. In this
manner, the automatic tool changing feature enabled the machining centre to pro-
ductively and efficiently machine a range of components, by replacing old tools for
new, or preselecting the next cutter whilst the current machining process is in cycle.
In the mid 1960s, a UK company, Molins, introduced their unique "System 24"
which was meant to represent the ability of a system to machine for 24 hours per day.
It could be thought of as a "machining complex" which allowed a series of NC single-
purpose machine tools to be linked by a computerised conveyor system. This con-
veyor allowed the workpieces to be palletised and then directed to each machine tool
as necessary. This was an early, but admirable, attempt at a form of Flexible Manu-
facturing System concept, but was unfortunately doomed to failure., Its principal
weakness was that only a small proportion of component varieties could be machined
at any instant and that even fewer workpieces required the same operations to be
performed on them. These factors meant that the utilisation level was low, coupled to
the fact that the machine tools were expensive and allowed frequent production
www.EngineeringBooksPdf.com
The Development and Design of CNC Machine Tools 3
www.EngineeringBooksPdf.com
4 CNC Machining Technology
point is not often considered, as many companies are all too concerned with today's
production problems rather than those of the future. Taking this theme a little
further, in a volatile market a feasibility study should perceive not only the short and
medium term productivity goals, but also the long term ones, as it is often the long
term trends of productive capability which are the most important if a company is to
amortise their costs. When highly sophisticated plant such as an FMS is required, it
can be several years from its original conception before this is a reality on the shop
floor, and a company's production demands may have changed considerably in the
mean time. If, for any reason, the wrong machine/s has/have been purchased, or
more likely, something has been overlooked during the feasibility study, then the
"knock-on effect" of this poor judgement is that it will have cost the company dearly
and, at the very least, any future study will be looked on by the upper management
with disdain and scepticism.
A company should plan and discuss their products and systems to be implemented
in the future with an eye on the production equipment of the present. This is very
relevant, as any responsible production engineering company will invest in manu-
facturing equipment which has reached a reliable level of maturity, yet at the same
time allow for further growth over a foreseeable time, and in such a manner, maintain
and strengthen the competitiveness of the enterprise. Fig. 1.1 graphically illustrates
the relationship between product maturity and level of utilisation of production
technology today. In recent years, the labour overheads have reached almost the same
level as the direct labour costs and this has meant that methods employed using
conventional production have clearly slipped into an "ageing phase". This is also true,
to a certain extent, for NC technology, as this has shifted from maturity to a particular
level of ageing and in the medium term, will offer no further competitive oppor-
tunities. Obviously, planned investments must embrace the growth area technologies
~1
MATURITY .I...EYf..l....
Fig. 1.1. The degree of maturity and utilisation of manufacturing techniques currently on offer. conv.,
conventional manufacture; NC, numerical controlled manufacture; CNC, computerised NC manufacture;
DNC, distributed numerical control (note: not direct numerical control in this context); FMC, flexible
manufacturing cell; FMS, flexible manufacturing system; CAQ, computer-integrated quality control; AF,
automated factory. [Courtesy of Scharmann Machine Ltd.]
www.EngineeringBooksPdf.com
The Development and Design of CNC Machine Tools 5
(Fig. 1.1), but these sophisticated technologies - although they create conditions for
optimum utilisation of the plant - mean that capital equipment is more costly to
purchase. Whenever high cost equipment is purchased it is usually the intention of a
company to maximise their financial outlay by reducing the pay-back period to a
minimum, using second and possibly a third shift. This strategy has the effect of
lowering the hourly machine rate drastically, or to put it another way, these systems
are over-compensated by more intensive utilisation, so that despite the higher amount
invested, a better utilisation and in most cases higher machine performance will
achieve a reduction in costs.
In the high technology-orientated former West Germany, a recent survey concluded
that only about 12% of the machine tools installed were less than 5 years old. That
is to say, many conventional machines are still actually in use and must be supple-
mented, or replaced in successive small steps by replacement and/or expansion
investments. Continuing this theme, of current average age of the machine tool
compared with its utilisation level, it can be seen (Fig. 1.2) that it is precisely in this
area that the largest amount of manoeuvring space for entrepreneurial decisions
occurs. In the early 1980s, a review regarding machine tool utilisation was conducted
and the results showed that on average only approximately 700-800 hours per annum
were spent actually doing " cutting" work. If one refers this to the theoretically
available annual loading time for the machine tool of 364 x 24 hours per day, this time
will represent approximately 8% and this is shown in Fig. 1.2. This graph also
attempts to show the individual blocks of time which cannot be used for actual
production and it illustrates just how little influence any small idle time improvements
Fig. 1.2. Time loss constituents in medium batch manufacture. [Courtesy of Scharmann Machine Ltd .)
www.EngineeringBooksPdf.com
6 CNC Machining Technology
TURNING OPERATION.
NUMBER IN BATCH
Fig. 1.3. Cost comparison against batch size. This shows clearly the advantage of using a CNC machine.
will achieve on the machine, when compared with the enormous potential of incom-
plete utilisation. Obviously, improvements during the last 20 years in the cutting
capability of machine tools and their performance have shown increases averaging
500% and further drastic savings of time have been achieved in the area of idle times -
where higher rapid traverse rates and automatic tool and workpiece-changing equip-
ment have been developed. It nevertheless remains a fact, that even though these are
impressive productivity gains, they are a "drop in the ocean" when seen from the
overall view of the plant utilisation throughout the year.
So far we have been concerned with the likely problems that face a company
embarked on a feasibility study for the purchase of new equipment. Let us now
discuss the advantages to be gained from the purchase of the "correct" plant. One
of the main purposes in using a CNC machine tool is to increase the productive
throughput with this equipment - but this, as Fig. 1.2 has shown, can only be
effective when the other time-loss constituents have been minimised. Although high
volume production can occur using CNC equipment, it is not alone in this area and
under certain conditions can be surpassed by using more conventional technologies,
such as, single and multi-spindle lathes, or plug board machine tools, as illustrated in
Fig. 1.3. However, even here most of these controllers are now being sold with CNC.
The major feature of a CNC machine tool is its ability to cut down drastically the lead
times for similar components manufactured by a different plant (as depicted in Fig.
1.4) and this has meant that an economic batch size is one! Even complex double-
curvature component geometries can be quickly and successfully programmed by a
trained employee using on- or off-line programming methods, but more will be said
about this in Volume III. The real advance in machine tool design and monitoring
systems has meant that accuracy and repeatability of a component's dimensional
characteristics can be confidently predicted, thus time and again uniform work results.
www.EngineeringBooksPdf.com
The Development and Design of CNC Machine Tools 7
FORMERLY
I
I I.QQ.L I 10 LE l.lttL
iUTILIZATION TIME : (rapid traverse time
2-AXIS CN.C
TURNING M/C.
IMPROVED
CUTTING TOOL
TECHNOLOGY .
.!iQ.i:L ~SET-UP/SETTING
SIMULTANEOUS TIME CONSTITUENT
TURNING WITH ASSIGNED TO
4-AXIS CNL BATCH.
TURNING Mjc.
Fig. 1.4. To illustrate how cycle times have reduced with advancing CNC turning technology. [Courtesy
of Gildemeister (UK) Ltd.]
This repeatability has the added bonus of reducing inspection, assembly and fitting
costs by the virtual elimination of re-work and scrap. Storage of the part program and
its retrieval also has the effect of decreasing the lead times over the more conventional
manufacturing methods still further. As a consequence of this feature, the skill level is
retained by the company and does not leave when the employee moves on, or retires.
Other indirect, but crucial advantages accrue through the application of CNC tech-
nology and include: the precise processing of changes to the part with the minimum
of disruption of production, improved planning and scheduling results, repeat orders
are easily undertaken, plus many more attractive benefits. The results of these im-
provements of reduced tooling requirements and inventories together with the ad-
ministration benefits can be summarised graphically by the simple profit and loss
statement against time, shown in Fig. 1.5. Any machine tool is only making money
when it is cutting material (Fig. 1.6) and it is important to maximise this fact by im-
proving the machine's utilisation over second/third shifts and by other non-productive
machining time advances, as clearly indicated in Fig. 1.2.
This section has tried to show that positive advantages occur when a company
embraces the current CNC technology, but only, hopefully, after an exhaustive
feasibility study. Let us now consider how and why CNC machine tools are designed
and constructed and then go on to look at their systems of machine control.
www.EngineeringBooksPdf.com
8 CNC Machining Technology
+ CN.C MACHINE
Fig. 1.5. Tooling lead-in time for a new product. NB: There is a definite period of loss before the product
reaches the market and using CNC the "cross-over" comes sooner and profit is higher.
With the development of CNC machine tools from the earlier NC machines, this
meant that they were able to impart a degree of flexibility into programming and
more particularly editing. These controllers mean that program input and editing has
drastically reduced lead-times, making the acceptance of CNC technology to a whole
host of machine tools a more attractive proposition. Together with the great advances
in CNC electronic developments, the major machine tool casting designs have also
been rationalised and in many cases designed around "modular concepts". More will
be said on this topic later in this chapter.
1.3.1 Developments in the Design and Cast Structure of the Machine Tool
www.EngineeringBooksPdf.com
The Development and Design of CNC Machine Tools 9
INDIVIDUAL
MACHINING
OPERATIONS.
COMPLETE
COMPONENT
MACHINING.
TIME SAVED
Fig. 1.6. The turning centre with driven tooling considerably reduces work-in-progress, compared with
conventional manufacturing methods. [Courtesy of Gildemeister (UK) Ltd.]
otherwise they will have a disastrous effect on the tool life and on the workpiece
surface finish generated.
The secondary requirements of the machine tool structure are that the workpiece
and tooling are easily accessible to the operator, so that care is taken by the designers
to allow ease of access to a machine, which in turn reduces operator fatigue, a major
factor attributed to scrap workpieces. Until recently, all of the larger parts of a machine
tool's structure were built using cast iron, although some companies have produced
partially steel fabricated (welded) with cast iron assemblies fitted into them. Some
years ago concrete was employed instead of the welded bases; but although it has
been shown to give excellent results, only a few companies have chosen this route. In
fact several machine tool builders having tried the welded/cast structures for a number
of years, have reverted back to their original cast iron castings because of their
superior ability to dampen the tendency for self-exciting vibrations which can attend
the machining operation. It should be stated that all machine tool elements have
both static and dynamic vibrations present, but the cast iron structures have shown
superior vibration damping capacity to the partially welded and cast versions and are
less prone to flex under the higher forces generated by the latest cutting tool materials
and higher powered drive motors used of late. The very latest material to be used is
"Granitan" which is a mixture of crushed granite and a thermosetting mixture to cure
and bond it together; this is cold-set and has very high thermal stability, whilst
offering much greater damping capacity over cast iron.
If vibration were the only problem when machining then this could easily be
remedied, but, the cutting action induces high forces within the cast structure and if it
is not robust enough to withstand them, then it may twist and distort slightly
promoting poor geometrical and dimensional characteristics to the workpiece. In order
to minimise the torsional and distortion problem, a rib, or box-like structure is usually
www.EngineeringBooksPdf.com
10 CNC Machining Technology
Fig. 1.7. The rib and boxlike construction of the castings. [Courtesy of Cincinnati Milacron.]
employed on the casting as shown in Fig. 1.7. With the advent of unattended
machining which CNC allows, the structure of machine tools could be radically
changed giving better access and easier swarf removal. Typically, the slant bed on
turning centres has evolved which allows for these problems to be more-or-Iess
overcome and is considered superior to the flat bed construction found on conven-
tionallathes. When the lathe bed is slanted, tooling can be more easily reached by the
operator, as is true in the case for the workpiece. Swarf build-up has always been a
problem area when cutting certain materials and this has been completely overcome in
turning using a vertical bed - which is often protected completely by shrouds from the
swarf. When cutting long, stringy materials, the use of chip breakers allows the swarf
to drop freely away from the cutting region to the bottom of the bed where it is
disposed of efficiently.
Recently, many machine tool structures have become rationalised designs and are
based upon the "modular concept" philosophy. This "modular" design (Fig. 1.8)
allows the machine tool builder the opportunity to standardise certain features over a
range of machine tools, benefiting the manufacturer and consumer alike in reducing
the development and purchase costs whilst allowing more attention to be given to
each "module" in the machine. The same column, or table, may be common to a
variety of machines and this trend may be seen across the whole product range of a
machine tool company in certain instances. A typical modular concept philosophy can
be appreciated throughout the design of the major component parts shown in Fig. 1.9.
A critically important feature of any CNC machine tool is the accuracy/precision of
the bed ways which provide a datum from where all subsequent workpiece accuracy
emanates. This feature must be rigorously assessed as, if inaccuracies are present in
the base casting, as other axes are added this accumulation will compound the
problem of workpiece inaccuracy. Fig. 1.10 shows nicely the slant bed Z axis, with the
X axis assembly mounted in-situ and it can be appreciated that a single large casting is
used for the bed with the bearing areas spaced widely apart for extra stability to
minimise flexure - which is an important feature to note when purchasing a new CNC
www.EngineeringBooksPdf.com
The Development and Design of CNC Machine Tools 11
Fig. 1.8. The modular construction of machining centres. [Courtesy of Cincinnati Milacron.)
Fig. 1.9. The optional equipment and modular concept for a turning centre. [Courtesy of Gildemeister
(UK) Ltd.)
www.EngineeringBooksPdf.com
12 CNC Machining Technology
Fig. 1.10. Partial assembly of a turning centre's slideways. [Courtesy of Cincinnati Milacron.]
machine tool. Bedways have always been hardened in the past by using an induction
hardening technique, or similar methods, but a more common feature now is to bolt
fully hardened steel "ways" directly onto the casting. In particular, in recent years, the
major advancements have been in increasing slideway response and overcoming the
stiction problem which is present in most conventional bed way designs. As rapid
speeds on machine tools have increased to 30m/min recently, it was imperative that
stiction was minimised by reducing the coefficient of friction levels considerably.
Slideways are often given treatment such as "stick-free" coating - typically "Turcite".
This minimises the "stick-slip" effect and has tended to be used on the lighter cast
machine tool structures. When heavy workpiece loads are to be coped with, then
hydrostatic slideways are the only choice, as these "oiled" solutions are the only
viable alternative on extra large machine tools. With many of the machine tools
carrying intermediate loads, a different solution is on offer to the machine tool
designer and this utilises the so-called "frictionless" systems. A typical linear bearing
assembly has a combination of either rollers or needle rollers assembled into hardened
guides and bolted onto the casting and these run the whole length of the axis travel.
When the axis travel is particularly long or loads are higher, then the "Tychoway"
system might be used (Fig. 1.11). This assembly is in the form of continuous rollers
which are situated in the moving members and they bear onto the fixed member
either directly, when the surface is hardened, or onto a hardened strip let into the
casting's bearing faces.
Almost without exception, when the machine tool's slideway requires motion, this is
transmitted via an assembly known as a "recirculating ballscrew". Fig. 1.12 shows a
partially cut-away diagram of just one type of ballscrew assembly mechanism. The
assembly shown in Fig. 1.12 has the flanged nut attached to the moving member and
the screw to the "fixed" casting. Thus any rotational movement of the screw will
displace the moving member's slide way in the desired direction. These recirculating
ballscrew designs can have ball cages of internal or external return, but all of them are
based upon the Ogival or "Gothic arch" prinCiple. This geometry ensures that a point
www.EngineeringBooksPdf.com
The Development and Design of CNC Machine Tools 13
Fig. 1.11. 'Tychoways" situated strategically along the hardened way of a machine tool for efficient
transmission of loads and motions. [Courtesy of Cincinnati Milacron.]
Fig. 1.12. A typical arrangement of a recirculating ballscrew assembly for efficient transmission of motion
of slideways without "backlash". [Courtesy of Cincinnati Milacron.]
contact occurs between the ball, its nut and the screw, giving low friction with over
90% efficiencies. With the ultra-fast "rapid" motions of some of the latest CNC
machine tools being around 30 m/min, some ballscrew assembles are of the two-start
Ogival type and are needed to cope with such high translations of motion. As
www.EngineeringBooksPdf.com
14 CNe Machining Technology
expected, the accuracies of such baUscrews are high, in the region of 0.005 mm over
300 mm being possible and on large machines these baUscrews may be of considerable
length with high values of stiffness, up to 2000NIllm.
The traditional Acme thread used on conventional machine tools has efficiencies
ranging from 20% to 30%, but although this is significant, it is not the main reason
why baUscrew assemblies have superseded them. The real reason for their universal
acceptance by machine tool builders, is that they can be pre-loaded in-situ and in such
a manner overcome any backlash which might otherwise be present in "normal"
thread assemblies. Ballscrew assemblies vary in their method of achieving zero-
backlash and are available as either single, or twin-nut designs with such features as
vernier adjustments in the more expensive designs for accurate pre-loading level
adjustments. These vernier systems can be precisely set to the required pre-load level,
whereas the other ballscrew systems require a ground spacer to be fitted between the
two flanged nuts. These hardened and ground ballscrew assemblies require little, if
any maintenance during their working lives once "torqued-up" and set. Every ball-
screw, however accurately ground it is, will have errors in its pitch present. This
inaccuracy is removed upon laser calibration at the final assembly stage when align-
ment errors are assessed and these pitch errors are fed into the machine control unit at
precisely displaced intervals (Fig. 1.13). This means that despite pitch inaccuracies
occurring, the controller adjusts - in other words, compensates for - the slideway
position to eliminate this error and move the axis to the command position given by
the CNC program.
Complementary and in situ with the ballscrews are the main motor drives which are
usually of several types:
stepper motors (these will be discussed in section 1.4.1)
DC motors
AC motors
digital drives
The power of DC motors has increased the metal cutting capability of CNC machine
tools in a similar manner to that of advances in the cutting tool materials available and
their geometries over the last few years. In 1900 a turning operation on a bar of steel
100mm in diameter and 500mm long would have taken about 105 min. By 1970, owing
mainly to cutting tool improvements, the time taken to machine a bar of the same
dimensions was down to 1.2min. Today, a time of half the 1970 value is possible, with
the added bonus that if a facing-off operation is required on a bar, a constant surface
speed could be used. With DC motors, the trend at present is to use Thyristor/Triac
controls to be fitted to machine tools. Asynchronous motors with variac controls
which were fitted to the older machine tools could only achieve a speed range of 1: 4.
By using gearboxes the range could be enlarged to over 10 speed ranges in a geometric
progression. The problem with the older system was that even with the highest speed
selected, the range was not great enough to optimise the new speeds required by the
latest cutting tools and to obtain a constant surface speed requirement. DC motors
allow the advantages of higher speeds available with a better ratio between the lowest
and highest speeds and this simplifies the gearbox requirements, whilst their high
torque characteristics enable them to turn large diameter bars at low surface speeds.
www.EngineeringBooksPdf.com
The Development and Design of CNC Machine Tools 15
Fig. 1.13. The final test area, prior to alignment testing (laser calibration assessment). Each machine tool
is run continuously to check both electrical and mechanical performance before acceptance. [Courtesy of
Bridgeport Machine Tools.)
Metal removal rates under constant conditions of cutting speed, depth of cut and
feedrate, will keep the cutting forces constant, so that when the bar diameter is
increased the torque increases accordingly - hence the need for the high torque at low
speed. Rapid advances have occurred with high-power control technology and this
has meant that a reappraisal of DC motors for CNC machine tools has taken place.
The advantages of using AC induction motors over other types is that they tend to
be more reliable and easily maintained, yet are less costly than most other motors.
Obtaining rotation reversal of direction is simple with these three-phase AC motors
and it is possible using pole-change motors to obtain four speeds in arithmetic
progression such as: 350, 700, 1400, and 2800rev/min, or similar. AC motors are not
usually used for driving the main spindle directly - apart from the pole-change
motors, as expensive and specialised electrical equipment is needed to provide high
power with accurate stepless variable speeds. Whenever there is a need to drive the
main spindle directly, it is usual to utilise a mechanical variable speed unit in order to
obtain spindle speed variation. By 1984, it became possible to produce speed control
and variation of AC motors, by frequency variation of the electrical supply; this
resulted in a more general adoption of the AC induction motor by industry.
Recently, digital drives have become an important addition to machine tools, par-
ticularly with the advent of machines requiring ultra-high speed spindle rotations and
more importantly rapid feedrates in two, or three dimensions. Such drives have very
fast response times and are ideal for minimising the "servo-lag" problems associated
with high speed cutting operations, "data-starvation" - causing problems on part
geometries and the tendency for cutter vibration, together with improved cutter accel-
erations/decelerations. However, this will be discussed in more detail in the following
chapters.
www.EngineeringBooksPdf.com
16 CNC Machining Technology
Head clamps
a
Fig. 1.14. a A typical spindle system for a machining centre. (i) A large diameter spindle rides in tapered
roller bearings in a quill wQich is chrome plated and ground for smooth motion and long wear. Tapered
roller bearings have 6 times more stiffness than ball bearings to provide a net 50% increase in milling
rigidity. At speeds above 1400 r.p.m., the bearing preload is automatically reduced by 30% to assure cool
operation and long life. (ii), (iii) Quill guides provide accurate z-axis tracking. Milling clamps are
automatically energised during the milling cycle. (iv) The DC spindle drive motor is blower cooled. Filters
are easily inspected.
www.EngineeringBooksPdf.com
The Development and De 'ign 01 CNC Machine Tool 17
Headstock base
b
b The construction of a turning centre headstock. The headstock is designed to minimise the effects of
thermal distortion in order to provide high accuracy over extended periods of continuous operation. The
symmetrical spindle housing is separated from the machine bed by a special insulation plate so that any
heat generated by operation will not displace the spindle centre. In order to supply the rigidity required
for heavy duty cutting, the spindle is supported by double row cylindrical roller bearings and combined
angular contact ball bearings at the front, and double row cylindrical roller bearings at the rear. [a
Courtesy of DSGlMonarch; b Courtesy of Yamazaki Mazak Corporation.)
Probably the most important element in the complex build-up of CNC machine tools
is the main spindle on a machining centre or CNC mill, or the headstock on a turning
centre or lathe. The crucial element of its design and subsequent assembly directly
affects the workpiece quality. Fig. 1.14a shows a simplified diagram of a typical
machining centre spindle system, illustrating the attendant shafts, bearings and gears,
being of robust construction. Often the main spindle is refrigerated or the oil supply is
kept at constant temperature in order to minimise the effects of thermal expansion.
Figure 1.14b shows a typical advanced turning centre headstock spindle assembly
with its sophisticated arrangement of bearings and heat resistant material strategically
positioned to act as a "heat sink" to minimise the thermal growth and possible
distortion of the headstock assem,bly. If any growth due to thermal effects occurs in
the headstock its design should allow it to "grow" axially, thus minimising the effect
on workpiece accuracy.
An important element on any turning centre when turning between centres, is the
design and adaptability of the tailstock and the ability to remove it trom the cutting
zone when it is not required. Tailstocks tend to be of either the solid, partially
www.EngineeringBooksPdf.com
18 CNC Machining Technology
Fig. 1.15. A partially programmable tailstock supporting a long workpiece in the "latch-up" position. It
can be "latched-down" (lowered) when not required. [Courtesy of Cincinnati Milacron.)
www.EngineeringBooksPdf.com
The Development and Design of CNC Machine Tools 19
Fig. 1.16. Turret configurations. a 2-axis, driven/conventional tooling. b 4-axis, twin turret with driven/
conventional tooling. [Courtesy of Gildemeister (UK) Ltd.)
versions, but they all achieve the desired effect of removing unwanted swarf from the
machine.
Automatic and programmable tool changing mechanisms are an essential feature on
any turning centre and usually of the indexable turret variety typified by Fig. 1.16.
The two-axis version is normally a single type whilst the four-axis configuration has
the ability to machine several features on the same component, typically roughing and
finishing operations - known as "balanced turning" (Fig. 1.17a), or individual features
on the same component such as turning and boring (Fig. 1. 17b), or to machine
dimensions on separate components, when an auxiliary spindle is present. To give the
turning centre even more versatility it is possible for most machine tool companies to
offer machines with a "drivenllive spindle" to most, or all, of the turret positions if
required. This allows the programmer to specify drilling or milling operations on the
component using a rotating tool station (Fig. 1.18). This useful feature of powered
tooling requires at the very least, some form of indexing control to the headstock
www.EngineeringBooksPdf.com
20 CNC Machining Technology
Fig. 1.17. a "Balanced turning" produces fast stock removal, or different features to be machined
simultaneously. b Twin turrets allow versatility, i.e. to turn and bore simultaneously. [Courtesy of
Gildemeister (UK) Ltd.]
spindle, allowing such features as: flats, slots, and splines, etc., to be machined
on prismatic parts; The indexing "C-axis" will clamp the headstock spindle at the
required angle via a "shot-pin" which positively locates into an index plate slot, then
the feature to be milled, drilled, or tapped etc., can be accomplished with a degree of
accuracy and constraint.
For completely universal machining capabilities on a turning centre using the so-
called "one-hit" cutting capabilities in just one set-up, the machine tool needs to
be equipped with a fully programmable "C-axis" control to the headstock spindle
coupled to a "driven tooling" facility (Fig . 1.19). By using such a combination of full
''C-axis'' control and "live tooling", this will, in one sense, negate the need for using,
say, a machining centre to complete the part. "One-hit machining" has several major
economic benefits:
www.EngineeringBooksPdf.com
The Development and Design of CNC Machine Tools 21
Fig. 1.lS. A "driven tooling" facility will increase a turning centre's versatility to machine a range of
prismatic parts. [Courtesy of Cincinnati Milacron.}
www.EngineeringBooksPdf.com
22 CNC Machining Technology
Fig. 1.19. To show just some of the cutting capabilities when a fully programmable "C-axis" headstock
spindle, utilising a "driven tooling" facility is available. [Courtesy of Gildemeister (UK) Ltd.]
through the headstock spindle for the manufacture of parts. Some bar-feeders are of
quite sophisticated design with "silent-running" capabilities; these also allow new
lengths of bar stock to replenish the bar-feeder when the previous one has been
consumed. When automatic bar length loading accessories are present, then an
untended machining condition is possible with large batch runs.
When it is necessary to machine either long workpieces or those requiring support
whilst either centre-drilling or boring, then a very useful accessory is the program-
mable steady. The programmable steady (Fig. 1.22) supports the part in order to
eliminate the effects of the cutting force and its subsequent displacement of the work
during machining operations - this would be a particular problem whenever it is
necessary to completely machine a long, thin bar along its entire length. Steadies are
usually of two types, those:
with a separate motion along the bedway of the turning centre,
fixed onto the turning centre turret (as shown in Fig. 1.22).
www.EngineeringBooksPdf.com
The Development and Design of CNC Machine Tools 23
Fig. 1.20. "Driven tooling" configurations can be quite sophisticated, ranging from (above) straddle
milling to (below) adjustable angled heads on a turning centre turrets. [Courtesy Gildemeister (UK) Ltd.)
In either case, the rolling element supports are positioned on adjustable fingers
which automatically open, or close, according to the diameter to be supported.
In order to minimise the damage to the completed workpiece an automatic part-
catcher is a useful addition to a turning centre. Part-catchers come in .a variety of
designs and have different methods for catching the workpieces. As the surface finish
is often a criterion used in assessing the part quality, then any damage to its surface
once machined will obviously affect the quality attributes on the drawing and may
lead to the workpiece being scrapped. Therefore the part-catcher should collect the
workpiece and deposit it into a receptacle and avoid damage to the finished part by
gently guiding the components to their respective parts bins.
To complete this over-simplified and brief view of just some of the auxiliary equip-
ment offered by machine tool companies on turning centres, it is worth returning
once again to some other interesting tooling configurations available today. Fig. 1.23
illustrates a synchronised dual turret mechanism that has been partially cut away to
www.EngineeringBooksPdf.com
24 CNC Machining Technology
Fig. 1.21. A "silent running" automatic bar-feeder for uninterrupted production of parts. [Courtesy of
Cincinnati Milacron.]
Fig. 1.22. A programmable steady for long workpiece support. [Courtesy of Gildemeister (UK) Ltd.]
show the internal constructional details of its assembly. As can be appreciated from
the photograph, the external tooling is held in the lower drum turret whereas the
internal tooling is located on the larger turret. This design considerably increases the
versatility and range of cutting tools available for component production. The final
tool holding mechanism, shown in Fig. 1.24, utilises an automatic tool delivery system
to the turning centre via a gantry robot. This type of tooling arrangement decreases
www.EngineeringBooksPdf.com
The Development and Design of CNC Machine Tools 25
the amount of tooling held on the turning centre at any instant and allows "sister-
tooling" concept (this means a duplication of much-used tooling) to be incorporated,
whilst a large tool library is held in the buffer-store of a chain-type holder. The ver-
satility of tooling configurations is increased phenomenally by such mechanisms and
they are often incorporated into Flexible Manufacturing Systems, but are not unusual
in the larger "stand-alone" turning centre applications and auxiliary equipment.
www.EngineeringBooksPdf.com
26 CNC Machining Technology
Fig. 1.24. Automatic toolchanger for a turning centre using a gantry robot. [Courtesy of SMG Co. Ltd.]
Fig. 1.25. Twin rotary carousels on a palletised horizontal machining centre. [Courtesy of FMT Ltd.]
www.EngineeringBooksPdf.com
The Development and Design of CNC Machine Tools 27
Fig. 1.26. A 60 tool capacity chain-type magazine for a machining centre. [Courtesy of FMT Ltd.]
magazine is depicted. This type of tooling configuration lends itself nicely to the
"banking of magazines". With the "banking" approach to tool storage, the inventory
of tools held can be increased by positioning side-by-side similar tool magazines
allowing the capacities to be increased in steps of 60. Thus with only one magazine 60
tools can be held, with two 120 tools may be carried, with three "banks" 180 tools can
be used on the machining centre. Obviously there is a finite limit to how many
magazines can be "banked" for each machine tool and when a greater capacity is
required this means using a different approach to tool delivery. More will be said on
this topic in chapter 6. Yet another chain-type method of tool carrying is that shown in
Fig. 1.27, where two magazines of tools are situated above and below one another and
this application also lends itself to the "banking" technique, up to a maximum of three
banks - giving a total of 270 tools. As can be appreciated by observing the photo-
graph, the range of tooling carried by such magazines is immense. The tooling
inventory ranges from: small drills and endmills, to multi-spindle drilling heads,
special-purpose tooling and large side-and-face cutters mounted upon stub arbors, to
tool-sensing probes (i.e. touch-trigger probes) . Clearly, when large diameter tools are
held in their respective tool pockets, then the adjacent pocket either side of this tool
must be left empty to avoid them fouling one another. This fact can be appreciated by
looking at the large diameter face mill shown in the bottom left-hand position of the
lower magazine in Fig. 1.27 and at other positions in the photograph. Whenever a
large tooling load is to be carried by a magazine it is important to "balance" the loads
within it, by situating the heavy tools evenly throughout the tool pockets as this
www.EngineeringBooksPdf.com
28 CNC Machining Technology
Fig. 1.27. A 90 tool capacity auto-toolchanger magazine (chain-type). [Courtesy of Cincinnati Milacron.]
ensures that an out-of-balance effect is not created in any particular area of the chain.
This approach to "balanced" tool loading within the magazine can be appreciated
from Fig. 1.27 where the large tool masses are distributed throughout each chain. If
out-of-balanced tooling occurs there is a tendency for high inertial effects to be present
within the chain and this may lead to premature seizure of the chains or tools
jamming.
When a really large scale tooling capacity is needed - often in an FMS environment,
rather than with the large "stand-alone" machining centres, then the "hive" tooling
approach is often used. This simply consists of "racking" the tools in a storage unit
and using a tool transfer mechanism to deliver them to the machine tool. This "hive"
method allows a high density of tooling to be achieved in a relatively small floor area.
It has been shown in the previous comments and photographs that great impor-
tance is given to the tool change mechanism, as this will directly affect the non-
productive idle times during the manufacture of a part. In order to achieve efficient
tool transfer the tool changer has recently been the subject of intensive design changes
by the machine tool manufacturers. Typical of a large-scale tooling complement with a
heavy-duty tool change mechanism is the one illustrated in Fig. 1.28, where the whole
assembly can be appreciated. This assembly will form the basis of an explanation in a
step-by-step manner of the actual tool changing sequence (Fig. 1.29). In Fig. 1. 29a,
whilst the machine tool continues performing the cutting operations, the magazine is
rotated by the shortest route until the required pocket appears at the tool change
position - in this case a twist drill will be the next tool chosen. The machining is
completed and the double tool change arm removes the drill from the pocket (Fig.
1.29b) and slides down to the position where tool changing can begin and whilst this
is occurring the magazine rotates to the empty pocket which is ready to receive the
slot drill. In Fig. 1.29c the photograph shows how the double tool change arm has
swung through 90° and gripped the slot drill in the machine's spindle. The double
www.EngineeringBooksPdf.com
The Development and Design of CNC Machine Tools 29
Fig. 1.28. Automatic toolchange using a double-ended index arm. The diagrams show the tool index arm
movements. [Courtesy of Cincinnati Milacron.]
arm then indexes through 180°, after the hydraulic draw-bar has released the pull stud
on the tool adapter and lifted clear of the spindle nose (Fig. 1.29d). It places the twist
drill into the spindle nose, then it is free to withdraw from the vicinity swinging back
to the tool chain to place the slot drill into its correct pocket, so that cutting can
recommence. Several points should be made before we dismiss this tool changer from
our thoughts. During the removal of the slot drill from the spindle nose by the
hydraulic draw-bar, once disengaged from the pull-stud on the tapered tool adapter it
has an air-blast through from the back of the tapered seating face. This blast of air
removes any debris situated in the vicinity of the spindle nose and continues until the
new tool is firmly seated in the spindle taper. This continuous air-blast will also clean
the new tool of any debris which it might have picked up, allowing a positive seating
in the spindle nose.
www.EngineeringBooksPdf.com
30 CNC Machining Technology
b
Fig. 1.29. a Whilst machining continues, the tool is found in the magazine (twist drill). b The double arm
removes the drill from the pocket and the magazine rotates to the empty pocket ready to receive the slot
drill (in spindle). c The double arm unit swings through 90° and grips the slot drill. d The double arm
indexes through 180°, placing the drill in the spindle. It then withdraws and puts the tool in the pocket
and machining recommences.
www.EngineeringBooksPdf.com
The Development and Design of CNC Machine Tools 31
www.EngineeringBooksPdf.com
32 CNC Machining Technology
A tool-changing sequence similar to the one described in Fig. 1.29 would have a cut-
to-cut time approaching 20 s and is reasonably slow compared to some of the latest
versions offered. This is not meant as a criticism as these heavy-duty systems, and
tool loads of necessity would suffer from inertial effects if there were great increases
in speed. However, some of the lighter-duty machine tools with smaller tooling
capacities and light tool loads can literally be swung over the Z-axis of the machine's
spindle and the cutter. It is then positioned in its correct pocket by a downward
slideway motion of the Z-axis, in the case of a vertical machining centre. The axis
travel is then reversed and the magazine is rotated until the new tool is below the
Z-axis and this tool is picked up by the movement downwards of the Z-axis slideway
and when it is clear of the magazine the whole tool carousel will swing out of the way.
This tool change mechanism has fewer moving parts than most conventional
systems and relies on the fast up and downward motions of the Z-axis. It can
typically change tools in less than 2 s, giving a cut-to-cut time of 4-5 s. Many tool
changers utilise pneumatic arms for the relative motions of tool changing and it is
essential to have an adequate air supply in order to minimise pressure drops which
can jam the tool change mechanism during cutter removal. If tool change arms
become stuck, then there is a recovery sequence of button-pressing, but the whole
problem may be minimised by having enough air available to meet the demands from
all other areas of the machine shop.
Special purpose auxiliary tooling equipment is available for machining centres
and sophisticated and highly adaptable numerically controlled u-axis programmable
milling heads can be fitted, for the machining of complex part geometries. Angled and
swivel heads allow the machine tool to cut surfaces not readily accessible to the
normal tooling. This means that an extra break-down and resetting of the work-
holding equipment is reduced, as would be the non-productive idle times. Multi-
spindle drilling and tapping heads, on the other hand, give the programmer the ability
to drill, tap, counterbore, etc., a series of holes in just one Z-axis motion of the
slideway. This has the affect of drastically reducing the machining time for a similar
part produced using conventional machining technology and becomes a useful cost-
effective addition to any medium-to-Iarge term batch production.
When the early machine tools were designed there was an obvious emphasis on
manual operation with the slide positioning being controlled by human involvement.
To achieve this level of control "men" used their "sensors" - eyes and ears - whilst
the central processing unit - the brain together with servos (arms and legs) - allowed
them to control machine tools by communication of all these interrelated functions
using the central nervous system. Until the advent of micro-electronics this method
for machine control was the best system of universal adaptability available, but it
suffered from serious shortcomings:
a period of lengthy training was required for the craftsman
people can easily become distracted
a person's performance is dependent upon their physical/mental condition
their efficiency is inversely proportional to time
their speed of operation is limited
www.EngineeringBooksPdf.com
The Development and Design of CNC Machine Tools 33
If these obvious disadvantages could be overcome using the latest CNC technology,
how should it be developed? At the heart of any computerised machine tool is the
machine control unit (MCU); this is the connection between the programmer and the
machine tool. If a part program is written with/without the use of computer assis-
tance, it must be produced in a suitable medium for conversion by the MCU into
machine motions via electrical, or hydraulic servo-mechanisms. During the early 1950s
the numerical control units tended to be bulky, whilst today's CNC utilises the latest
microprocessor technology. The early NC systems were "hard-wired" - meaning that
functions such as interpolation, tape format, positioning methods of slideways and
others, were determined by the electronic elements built into the MCU. Purchasers of
early NC machinery had to specify whether they wanted the equipment to function in
an absolute, or incremental format and so on, as this considerably affected the cost of
the MCU. The advantages gained by having a large range of programming options
had to be weighed against a healthy cost penalty.
By the early 1970s electronics had become more sophisticated so that complete mini-
computers were being fitted to CNC machine tools; this meant that the previous
"hard-wired" options were now contained within the software package. As a result
of these software options, greater flexibility of programming was possible utilising
computer logic for specifying commands in absolute, incremental and polar coordi-
nates, etc., making them infinitely more capable, but at no real extra cost. Other
bonuses directly related to computer usage included the ability to be programmed at a
later date using different tape formats, as these are within the computer logic at its
time of original manufacture. When one considers the CNC designed MCU, it can be
readily appreciated that the "soft-wired" controllers are significantly different from
their older "hard-wired" cousins and have an "executive program" allowing the
controller to "think" as either a turning or machining centre. The company building
the CNC will load an "executive program" into it and the machine tool company will
modify it to suit their requirements. In this manner the machine tool builder will use a
portion of the memory for such features as: interface logic, tool changer control and so
on, to give the controller the ability to be used in a specific type of machine tool.
The latest CNCs are incredibly sophisticated using a visual display of programming
parameters on the cathode ray tube (CRT), similar to a TV screen. However, the real
difference lies in the fact that the screen is often a multi-function type and can display
the full operational and parametric data together with screen graphics; more is men-
tioned on this topic later when considering CNC programming and types of con-
trollers currently available. Together with the functions concerned with actually
running the program, other necessary functions that are also displayed include:
diagnostic maintenance backup and trouble-shooting guidance together with many
other features that may be displayed on CRT.
Any CNC has an internal memory store for keeping and listing a library of pre-
viously proven part programs and until recently these were volatile in nature. This
meant that if there was no battery-backup when the machine was shut down then
all the programs were lost. This was obviously undesirable, therefore non-volatile
''bubble'' memories have overcome the problem associated with saving the "hard-
copy" punched paper or magnetic tapes as they are often termed. These "bubble"
memories refer to the method of charging (ionising) particles to give the "sense"
of memory. The "bubble" memories can maintain and retain the part program in
their memory for many years without use and degrade very slowly. They can be
"refreshed" if called into the active memory area and then restored, if necessary, at
any time. The main draw-back with storing programs that are not used very often, is
that the available memory is soon exhausted and it is usually more profitable under
www.EngineeringBooksPdf.com
34 CNC Machining Technology
Slideway positional control systems may be classified into three different groups,
these are:
an open-loop system
a closed-loop system, with indirect measurement
a closed-loop system using direct measurement
Considering each system in turn and illustrating their mode of operation and control
using simple block diagrams will be the theme discussed next.
Open-looped systems by definition do not use any form of feedback control and as
such neither the slide movement nor its velocity is monitored. With such a system,
the motor will simply drive the slideway to the desired position by means of a pulse
count electrically generated. A command signal is sent to the stepping motor and it
assumes that when the required count of pulses has occurred, the machine slide has
moved a certain distance. As no form of slideway monitoring system is present, this
method of control is relatively cheap to construct; however its real draw-back is that
any errors that are present will obviously accumulate. As mentioned above, these
open-loop systems for slideway motion and control rely on stepping motors and their
method of operation will be mentioned later in this chapter.
www.EngineeringBooksPdf.com
The Development and Design of CNC Machine Tools 35
ICQt:!t:!A~Q
!.SIGNAL
r--
t1.O.lQR. .MACHlNf. .s.Lll1E..
f--
COMPARATOR.
POSITIONING
SIGNAL.
Aa.!JAL FEED-BACK.
POSITIONING
~
DIRECT
MEASURING MEASUREMENT
~~~~~~~~~~~~
MACHINE SLIDE.
www.EngineeringBooksPdf.com
36 CNC Machining Technology
+Y
+8 +E~
METHOD OF DESIGNATING
ROTATION
AXES;-
LINEAR.
W~D
+F
ABC [PRIMARY] X Y Z SECO NDARY .AXIS.
DE [SECONDARY] U V W
[TERTIARY] P Q.R
+Z
NB: to a certain extent the pitch error can be compensated for, once the machine has
been calibrated. Calibration to eliminate the errors occurs by programming a laser
interferometer to take account of the slideway pitch errors in the ballscrew. Thus as
the program for the machining of the part occurs, minute slideway adjustment of its
position is undertaken keeping a higher precision than the ballscrew would otherwise
suggest.
The B53635 Part 1: 1972 and the German VOl proposal 3255 have identified CNC
machine tool axes with the following three-dimensional mathematical system: X, Y
and Z using upper case letters. The direction of movement along each axis is denoted
by a plus (+) or minus (-) sign, from an established datum. Together with the
primary axis designations, there is rotational notation around each linear axis and this
is specified by A, Band C in upper case.
These linear and rotational motions are illustrated in Fig. 1.31; however, a number
of rules are observed when considering motional kinematics:
coordinates are perpendicular with respect to each other and primarily refer to the
workpiece, with the direction of the machine tool motion being derived from them
for all machining phases such as workpiece SWivelling, the coordinate system is
retained
following the mathematical direction of rotation, the angles should be stated clockwise
from the datum - looking in the positive direction
the origin of the coordinate can be positioned outside, or inside, the workpiece and
with care in the axes selection, only positive coordinates will result. The alternative
would be a mixture of positive and negative coordinates, which might add to
confusion when programming.
www.EngineeringBooksPdf.com
The Development and Design of CNC Machine Tools 37
When one considers the methods for axes identification on turning and machining
centres (Fig. 1.32), we note that in both cases the rotating axis is always Z. So in
the case of a lathe or turning centre, the workpiece rotates, whereas on a mill or
machining centre it is the cutter. On a turning centre the next principal axis is the X
and two others are shown, the workpiece rotation C' - that is counterclockwise, with
C being clockwise rotation, and when the machine tool is fitted with a secondary
turret, the notation is W. The secondary axes system U, V and W is independent and
parallel to the primary axes X, Y and Z respectively, as shown in Fig. 1.31. A third, or
tertiary, linear motion with the axes recognition of P, Q and R is again parallel to and
independent of X, Y and Z which can also occur. Thus the secondary linear motions
are those nearest to their parallel and independent primary axis respectively, whilst
the tertiary axes are obviously farthest away.
The characters D, E and F are normally used to designate secondary angular/
rotational motion either parallel to A, Band C, or about special axes. To confuse us
even more, D may be associated with a tertiary feed function and E a secondary feed
function!
When axes designations are assigned, it is assumed that the cutter moves in relation
to the workpiece. We know that this is not always true and on many machines the
workpiece moves relative to the cutter, which means that the workpiece moves in the
opposite direction to the tool. Under such circumstances, it has been stated that each
axis should be designated by a prime mark (dash). In Fig. 1.32, the milling application
shows this notation, namely X' and Y'. All of this seems rather complicated, but fear
not, the programmer need not be too concerned with prime designations. If one
considers that the X axis moves to the right along a plane of the workpiece, when
facing that plane, with Y moving up and Z moving out, this simplifies things con-
siderably. So, if the cutter moves over the workpiece, or vice versa, this possible
confusion becomes of minor consequence. The main concern is to obtain the correct
finished geometry on the workpiece and to achieve this aim, the programmer must
know the machine type and its basic axes designations. To put it another way, the
programmer needs to know which axis is, for example, say, the Y, and what is the
plus direction, and which is the minus, and this is so for each linear and rotary axis.
Just to complete the intricate picture of axes designations, if a multi-spindle ma-
chining centre was to be used: motions, or axes that are parallel to and "slaved" to the
www.EngineeringBooksPdf.com
38 CNC Machining Technology
principal axis, are designated as follows: the principal axis is Z, and say the two
"slave" spindles would be Z2 and Z3 respectively. This would be true for a gantry mill
with three spindles working in unison on a profiling application.
Other than classifying machine tools by their cutting processes, it is also possible to
distinguish them by the method used for positional control of the slideway motions.
Broadly speaking, there are three main positional control categories used in classifying
all CNC machine tools:
point-to-point
straight-line (or paraxial as it is sometimes known)
continuous path control
These methods of positional control systems will now be briefly reviewed.
If a milling operation is the requirement from one feature to the next, then there is
usually a feedrate associated with this movement. Therefore the previous point-
to-point method of control would be useless, as each axis must be monitored con-
tinuously under full control. Paraxial control was a system developed quite early on,
which gave machine tools better control and adaptability than the point-to-point
variety. However, to the author's knowledge, there is no machine tool company that
solely offers this type of positioning facility nowadays.
www.EngineeringBooksPdf.com
The Development and Design of CNC Machine Tools 39
y z
n
Z
y
1
0 ILV X
X PLANE SWITCHINY.
(OR)
X
1. AXIS CONTOURING USING
CONTINUOUS PATH.
c
Fig. 1.33. Various types of control modes. a Point-to-point control. b Straight line or paraxial control.
c Continuous path control.
Contouring systems such as the continuous path type are by far the most common
types in use today. They have synchronised drives for feeding, providing an accuracy
of positioning anywhere within the "work envelope". These universal controls can be
used for point-to-point positioning and can rapidly vector from one coordinate to the
next; they can also be fed in a straight-line motion or be used for contour feeding
applications. When contouring, the tool's position must be continuously controlled
and this means that the controller must frequently change the relationships of the
linear motions of two or more axes in order to generate a contoured profile on the
www.EngineeringBooksPdf.com
40 CNC Machining Technology
workpiece. The control path must have an interpolator, so that it can calculate con-
tinuous path positions until the target point is reached. To illustrate the requirements
of such a contouring operation, if we consider that a contour is to be machined on a
turning centre, then to discriminate between one point and the next on the X/Z plane,
then the rectilinear movements must maintain an X: Z path ratio with a speed control
that governs the feed drives in the exact synchronised ratio of fx: fz, for the shape to
be successfully produced on the workpiece.
On most machining centres, they use two and a half axes for continuous path
control, where two axes are used for circular and one for linear interpolation when
machining three-dimensional (3D) shapes of reasonable complexity. If, however, a
"true" 3D or multi-path milling control is required, then a more sophisticated machine
tool is usually desirable. Mention should be made of the fact that even when con-
trolling only two and a half axes, if the information has been post-processed on a
CAD/CAM work station, then intricate 3D shapes can be successfully machined, but
more will be said on this topic later.
It has been mentioned that when we are controlling axes an interpolator is used; so
what are these interpolation methods and how do they differ? This will be the subject
considered under the next section, where most of the popular interpolation methods
will be reviewed.
1.4.4 Interpolating Methods on Machine Tools for Control of the Cutter Path
In a strict mathematical sense, if we know where the coordinates of two points are in
space, then as long as we define any position between these points we are "inter-
polating" and this is what a control system tries to achieve. There are many tech-
niques used for the interpolation of the cutter path that have been developed over the
years, with some of them losing favour of late. The principal interpolation techniques
used are:
linear interpolation
circular interpolation
parabolic interpolation
helical interpolation
cubic interpolation
involute interpolation
The first four have been shown schematically in Fig. 1.34 and a brief review of each
type will now be considered.
www.EngineeringBooksPdf.com
The Development and Design of CNC Machine Tools 41
(Fig. l.34a). To achieve this feat, the controller requires a high data processing ability
and using such methods it is possible to theoretically control the cutter path around any
complex shape, notwithstanding the geometrical limitations of the cutter orientation
to the workpiece. A major problem with using this interpolation method, is that when
contour machining, the part programs tend to be of vast block length. Incidentally,
this was one of the major reasons for the demise of NC punched paper tape as a
storage medium for complex contours. This point brings us nicely to a consideration
of the reasons why circular and parabolic interpolation have become popular, in
particular the former technique.
Interpolation using circular motion control is the next order of CNC movement and
has become a standard feature on most machine tools today. Principally, its obvious
use is in the machining of circles, or portions of circles - or their approximations.
Minimal data is needed to generate the necessary circular motions. Normally, all that
is required are the arc centre coordinates and the end points of the arc, together with
the circle radius to complete the programming as well as the direction of cutter
movement around the feature. On most machine control units (MCU), the circular
interpolation requires that the circle span be broken down to a single pulse output of
approximately 0.0005mm. This output is termed the "pulse weight", however, most
systems resolve to 0.001 mm. Automatically, the interpolator will compute enough
of these "pulses" to describe the circular cut, then the controlling signals will be
generated progressing the tool's path along this feature. Hence, the cutter path
around a circular arc will be within plus or minus one "pulse".
Circular interpolation may only be used on two axes planes at any instant and will
not interpolate on all three simultaneously. By utilising a series of arcs, a free-form
shape may be closely approximated using fewer data points, giving a truer profile
than by linear interpolation.
www.EngineeringBooksPdf.com
42 CNC Machining Technology
Y
1'W.. CAN BE IN 2 PLANES
.E.I.lliSl::L
(us shown I, OTHERWI SE
~TER PATH
IN EITHER
PLANES.
1 OR 3
X
METHOD A CURVE CAN BE
APPROXIMATED; R4 ,/
a
Y JiB. 2-DIMENSIONAL
CIRCULAR INTERPOLATION
USING ANY TWO AXES
SIMULTANEOUSLY.
PLANES'~
Y-z X-Z
X X-Y
i.e. x' + t= r'.
b
.liB. PA RABO LI C
IN TERPOLATION USES
3 NON - STRAIGHT LINE
POSITIONS (i.e. A MID-
POINT & 2 END POlNTSl
.
I.e.~
,
c
Z
=~~
.Ma A 3-DlMENSIONAL
MOTION; USING
I - I CIRCULAR
£llilStl..
/" _-., INTERPOLATION IN
y
\, ..... _..... /
~
X
2 AXES & LINEAR
INTERPOLATION,
SIMULTANEOUSLY.
d
Fig. 1.34. Interpolation methods. a Linear interpolation. b Circular interpolation. c Parabolic interpola-
tion. d Helical interpolation.
Cubic Interpolation
In a similar manner to parabolic interpolation, the main users for this technique are
the automotive and aerospace industries, where it is often required to machine free-
www.EngineeringBooksPdf.com
The Development and Design of CNC Machine Tools 43
form component geometries, but even here, there are only a limited number of users.
Using cubic interpolation, that is the ability to produce a third degree curve, gives the
programmer the ability to generate complex profiles with a small number of data
inputs. It describes curves accurately and allows for the smooth blending of one curve
to another without geometric discontinuities. The programmer uses customised
software when describing free-form shapes and does not have to write cubic inter-
polation executive routines.
Involute Interpolation
Recently, the introduction of involute interpolation has been found on some CNCs.
This technique allows the programmer to specify gear tooth forms based upon an
involute form, to be quickly and accurately defined using just a few data inputs.
General note: When considering the variety of interpolation techniques available
then the following observations based on the part geometry to be machined can be
made. If the profile is:
a straight line - use linear interpolation
a circle - use circular interpolation
a helix - use helical interpolation
if none of these, use linear interpolation - to approximate the curve, but never allow
the cutter path to deviate more than the component's tolerance.
www.EngineeringBooksPdf.com
44 CNC Machining Technology
( ((f+))~)
t§:J~
, CSlCSl CSlIS§I
\~J/~~~~
~_~' / ~TATOR 3.
SUB - STATOR 2.
SUB - STATOR 1.
Fig. 1.35. The principle of the stepping motor.
would need considerable space, so only a simplistic view of its operation will be
given. As a rule, stepper motors fall into two categories: the permanent magnet
motors, and variable reluctance motors, but there are hybrid constructions which
feature some of the functions of each type.
Basically, the stepper motor utilises the well-known principle that unlike poles
attract; if one assumes that the rotor and stator were made to appear like toothed
wheels (Fig. 1.35), with the general convention being for the external teeth on the
rotor and the internal teeth on the stator. With this approach, if we consider that the
alternative teeth are magnetised as either a "north" or "south" pole, this means that
the corresponding pole on the rotor will be attracted to the opposite pole in the stator.
Assuming now that we turn the stator, this would also turn the rotor, but naturally
the stator is not physically turned as it is the fixed part of the motor, although it is
possible to turn it electrically.
Normally a number of sub-stators are used to make up the total stator, with each
sub-stator being displaced from the next one by a "step" of 5°-10°. If the sub-stator is
now sequentially energised - that is one after the other - the rotor is attracted to the
next pole and so on. So as the poles are displaced a definite distance, the motor is said
to "step". Most stepper motors use 3 or 4 sub-stators, so that once the last one has
been energised, the cycle recommences at the first. Whenever the stator is energised
in the reverse direction, this causes the motor to run backwards. In this manner, it is
possible to convert digital signals directly into a defined distance, enabling an open-
loop CNC motion to be achieved.
It is worth restating that there are two basic methods of controlling the slideway
position prior to describing in detail closed-loop systems: indirect and direct tech-
niques. Fig. 1.36 schematically illustrates the two methods of monitoring slideway
position. The indirect method utilises the ballscrew for positioning, whilst the slideway
positional measurement is the linear distance travelled, which is monitored and sub-
sequently fed to the computer controlling the axis. Alternatively, the direct method of
slideway measurement uses a long, permanent scale fixed between the machine's
non-moving casting and the reading head to the moving slideway. A major bonus of
such a system is that the slide measurement does not rely on the ballscrew accuracy
and the presence of possible backlash, or indeed, the motor drive for positional
accuracy. These advantages of backlash and torque reaction elimination occur with
www.EngineeringBooksPdf.com
The Development and Design of CNC Machine Tools 45
INDIRECT MEASUREMENT.
LEAD SCREW.
direct measuring techniques, although they are present during heavy cuts with the
indirect methods and as such the "direct" methods give greater determination and
precision of slideway positioning. It should be noted that" Abbe's principle of align-
ment" is still not complied with, owing to the fact that the table ballscrew drive and
the measuring position of the fixed scale are not coincident. Abbe's alignment principle
states that "the measuring plane and the measuring position should be coincident",
whereas in reality there is an offset between the cutter path and its measurement
plane, which might cause errors to be induced during cutting operations.
www.EngineeringBooksPdf.com
46 CNC Machining Technology
Fig. 1.37. The principle of optical measurement based upon Moire fringes.
www.EngineeringBooksPdf.com
The Development and Design of CNC Machine Tools
47
1 I
- - - I - - -t- MOX •
I I
Light I I
intens ity I I
on
photocell.
30nd4
o
Fig. 1.38. Four-phase fringe system with resultant waveforms. [Courtesy of Ferranti Ltd.]
www.EngineeringBooksPdf.com
48 CNC Machining Technology
Fig. 1.39. Optical arrangement used with line and space transmission gratings. 1, exciter lamp; 2,
collimating lens; 3, index grating; 4, scale grating; 5, photocell strips. [Courtesy of Ferranti Ltd.]
In order to gain some degree of discrimination from one fringe to the next, four
photo-cells are usually spaced across the grating's width. As a result, four pulses per
cycle occur, with each pulse representing 0.005 mm if the pitch of the gratings is
0.02 mm. The sense of slideway direction can be obtained, by registering the order
in which each photo-cell is energised. Each axis when in motion produces generated
pulses, and an electronic decimal counting device sums them up, adding or sub-
tracting them from their various slideway displacement directions. All axes can be
set to zero at any convenient position and a comparator unit compares the actual slide
position with the command position and if a difference occurs, corrective action by the
servo-drive system results.
Typical arrangements of the optics and their respective Moire fringe assemblies are
shown in Figs. 1.39 and 1.40, for glass and reflective gratings, respectively . These
optical configurations are perfectly acceptable for lower accuracy machine tools, but if
high precision continuous control is required, then a more complex arrangement
is necessary. The upper diagram in Fig. 1.41 illustrates the previously mentioned
incremental mode type, whereas in the lower diagram the sophisticated high accuracy
approach for continuous path CNC uses more tracks to detect movement, with the
distance quanta doubling for every extra track added. In Fig. 1.42 an enlarged version
of this absolute scale method can be seen, using this "V-scanning" principle as it is
www.EngineeringBooksPdf.com
The Development and Design of CNC Machine Tools 49
, /1 \
I' \
I 'I \ \
,~ I\
I I~, I \
I \
'
I I \
J\ I
1\
I \
~ " ~'
~\I I
I I I I
I
I
I l, I
I I II I
~~
Ii ,\1 \ I 'I
\I
Fig. 1.40. Optical arrangement used with reflecting gratings. 1, filament; 2, collimating lens; 3, index
grating; 4, scale grating; 5, strip-silicon photocells. [Courtesy of Ferranti Ltd.)
often termed. It is worth discussing how and why this arrangement improves the
accuracy of slideway positioning of machine tools over the previous systems men-
tioned so far. Any CNC machine tool uses binary coded decimals - numerical control,
with the top diagram in Fig. 1.42 schematically illustrating a binary signal stretched
www.EngineeringBooksPdf.com
50 CNC Machining Technology
a INCREMENTAL MODE.
b ABSOLUTE ...M.Q.QL
COMPARATOR
out for the slideway length in longitudinal tracks. When the slide is moved, a binary
signal is produced and can be analysed, allowing the exact position of an axis to be
established. A problem arises with this technique in that the photo-diodes cannot be
exactly positioned so that all tracks are "switched" at the same time, leading to the
likelihood of faults in the reader system. The problem is overcome by using a "grey-
code" switch track and a V-form reader. The photo-diodes are arranged in the V-form
with the finest track using a single photo-cell, whilst other tracks have two photo-cells
positioned such that they are in the middle of the respective distance quanta pro-
ducing the so-called V-form. This configuration offers the advantage that only the
finest track needs to be very accurate, meaning that its calibration is much easier to
achieve.
There is a wide range of rotary and linear monitoring systems available to the
machine tool builder.
The operational procedure of the resolver is that if the rotor is lined up with the stator,
then the induced voltage is at a maximum and when the rotor is at 90° to the stator,
the voltage induced becomes a minimum. By counting the number of times the
voltage reaches zero, it is possible to determine how many times the resolver has
www.EngineeringBooksPdf.com
The Development and Design of CNC Machine Tools 51
turned and this being connected to the balls crew assembly, determines the table's
position. A further feature of the resolver is that the phase is altered so that at each
zero mode there is a phase shift of 180 By using the commonly practised two-phase
0
•
secondary winding technique where each winding is displaced at 900 to the other,
then the phase displacement and amplitude are "resolved" into their respective sine
and cosine components and can be analysed for slide displacement. A typical resolver
has a slideway resolution of 0.01 mm.
"resolved" in the same manner as the previous analogue method discussed for the
resolver.
A typical resolution of the inductosyn is 0.0025mm and like the optical grating
system discussed earlier, it finds many applications on CNC machine tools. A general
www.EngineeringBooksPdf.com
52 CNC Machining Technology
b Vl
o
u
N
W
II)
w
PHASE = ANGULAR
OISPLA CEMENT DISPLACEMENT.
MEASUREMENT SIGNAL.
1 REVOLUTION.
assembly partially cut away is shown for slideway monitoring in Fig. 1.45 and a rotary
application for a fourth axis on a horizontal machining centre in Fig. 1.46.
The laser offers the ultimate in position monitoring devices presently attainable, but is
still under development at the time of writing. However, it cannot be long before such
systems are adopted by machine tool companies for ultra-high precision work. It
offers the major benefits in a high resolution, direct reading, closed-loop and linear
control system for slideway positioning. To monitor the slideways, a stabilised laser
interferometer, coupled to customised optics, together with an electronics and soft-
ware package, produces the high resolution required and should be available in the
future. A data transfer rate equal to the laser reference frequency can be achieved.
A typical laser arrangement of an expected 3-axis closed-loop control on a machine
tool is shown in Fig. 1.47. The stabilised helium-neon continuous wave two-frequency
laser head sends out a beam which is bent, split and reflected around the machine tool
axes and then back to a receiver unit, closing the loop.
There are several major advantages with such systems apart from the high resolu-
tion of around 10 11m, including the much sought after ability to compensate auto-
www.EngineeringBooksPdf.com
The Development and Design of CNC Machine Tools 53
.0
"-'
1-
1-/---- ----,
Err
~ LI
I 1
1 1
1______ - - - ,
!~~i
ww
l--++--~
MOVEABLE SCALE.
( SLIDER 1
FIXED FASTENING.
www.EngineeringBooksPdf.com
54 CNC Machining Technology
£.lXI.lLZlli....
Fig. 1.46. An application of a rotary inductosyn.
Fig. 1.47. Closed-loop position monitoring using ultra-precise linear interferometers/laser. [Courtesy of
Habn & Kolb (GB) Ltd.]
www.EngineeringBooksPdf.com
The Development and Design of CNC Machine Tools 55
matically for ambient temperature changes, humidity and air pressure, which is a
major problem in most machine shops.
This section is not meant to be an exhaustive account of all the available machine tools
utilising CNC; that would require a book on its own. However, the comments and
photographs will be confined to reviewing turning centres and CNC lathe configu-
rations and then go on to briefly describe machining centres and CNC mills that are
currently available.
Let us begin the review by looking at probably the most popular turning centre
configuration currently available and shown in Fig. 1.48. This slant bed turning centre
has a 2-axis controlled turret holding a dozen or so tools in its turret. This allows both
right- and left-hand tooling to be situated in the outer ring of tool pockets, with the
inner ring being used in the main for hole-making operations: drilling, boring and
tapping. A partially programmable tailstock is a standard feature which can be latched
up/down to provide workpiece support, using centres. The tailstock's barrel can be
programmed to move in and out with a hydraulic pressure regulator controlling the
barrel's pressure requirements. This feature is important whenever long, slender
workpieces require centre support to avoid them buckling or distorting under the
hydraulic pressure application. However, the barrel is not feed programmable for
drilling, but it can be used in such a manner if physically connected to the cross-slide
and a Z axis motion is programmed with the tailstock latched up. The cast iron slant
bed drops swarf into the tray and is carried away by the continuous chain-type swarf
Fig. 1.48. A 2-axis turning centre with programmable tailstock. [Courtesy of Cincinnati Milacron.j
www.EngineeringBooksPdf.com
56 CNe Machining Technology
conveyor to a receptacle. The CNC has full colour graphics capability, displayed on a
large CRT.
A more sophisticated derivative of the previous turning centre is a twin turret 4-axis
machine tool (Cincinnati Milacron, Cinturn 8 C, Series 1408, CNC Chucking Centre),
but in this case without a tailstock fitted. The CNC has been up-rated allowing the full
control of 4-axes, but in this case in a rather unique manner. When programming the
part only the X and Z axes of the top turret need be considered and where appropriate
the U and Waxes of the bottom one can be used to perform simultaneously machining
operations such as "balanced turning" where necessary. This feature gives a 4-axes
turning centre the ability to manufacture parts much faster, thereby improving the
overall productivity considerably (see Fig. 1.4). As well as the "balanced turning"
operations on long diameters, useful operations using, say, one tool turret for external
and the other one for internal work can be accommodated easily. The penalty for such
turning flexibility is obviously a much more expensive capital outlay to purchase these
machine tools. As with the previous 2-axis machine, a swarf conveyor is a standard
feature and essential when such high stock removal rates are possible. It is worth
mentioning that programming this 4-axis machine requires the programmer to be
concerned with only two primary axes, X and Z, as the secondary motions of U and W
are taken care of by the CNC, including collision protection - which is a rather unique
programming aid.
If even greater flexibility and increased productivity is required from a turning
centre, then the levels of sophistication of machine tool axes configurations can be
increased immensely. Probably one of the most sophisticated turning centres available
is the Gildemeister (UK) Ltd, GT 50, featuring twin turrets and twin spindles (Figs.
3.11 and 3.12, Volume II) - fully programmable with the ability to :use "driven
tooling" for the machining of prismatic features on turned components. Incidentally,
both of the previous turning centres discussed can be operated with driven tools -
milling, drilling and tapping operations from their turrets if so ordered in such a
configuration from the machine tool builder. It is very easy to see that a considerable
number of axes may be controlled through the CNC and seven to nine axes are not
unusual nowadays. The unique feature of having a twin spindle facility is that the
main headstock and chuck is used for all "normal" "chucking" operations. The
opposing co-axial spindle (Fig. 3.11, Volume II) can slide down the bed once features
to be machined· by the headstock are completed by the top turret and grip the
component in synchronised rotation whilst the workpiece is still rotating. This allows
the component to be withdrawn, or supported whilst parted-off prior to withdrawal
enabling "back turning operations" to be completed on the rear of the workpiece by
the lower turret (Fig. 3.12, Volume II). Whilst the "backface" machining operations
are under way, the front facing top turret begins simultaneous machining of the next
workpiece so that two components are being machined at the same instant of time.
Such universal applications do not come cheap, but have expanded manufacturing
abilities offering great savings in productivity and if the company has the throughput
of work to justify this level of capital expenditure, then pay-back periods are signi-
ficantly reduced. The control console of this advanced turning centre has remarkably
few switches and buttons present to confuse the programmer/operator and the
sophisticated and customised software is where the "intelligence" of the CNC machine
resides. It is interesting to note that even this degree of advanced turning centre
control is not the highest level available, as on some machines the jaws, or even the
whole chucks can be automatically (Fig. 3.27, Volume II) changed allowing much
greater workholding flexibility and this is without even considering the automatic tool
and workpiece sensing devices, yet to be reviewed.
www.EngineeringBooksPdf.com
The Development and Design of CNC Machine Tools 57
Yet another derivative of the turning centre theme so far discussed is the configu-
ration used in the Pittler Petra, where a front loading arm will load workpieces onto
twin spindles after removing the previously machined parts. Different components
can be manufactured simultaneously by both of the independent slideways offering
considerable versatility. When higher production dictates this type of automatic
machine work loading, then greater volumetric throughput can be machined on
identical parts at the same time, as two can be produced in the time it takes to
manufacture one. Once again, a short slant bed is incorporated for each turret, and
naturally a swarf conveyor is an essential item in view of the volume of swarf
produced. Part delivery can be automatically achieved through the use of workpiece
conveyors or gantry loading systems, whichever is applicable to the company's needs.
Whenever there is a call for ultra-precise components and particularly of highly
accurate surface finishes, then a totally different CNC turning philosophy must be
adopted (see Fig. 2.27). To obtain the ultimate surface finishes produced by single-
point tooling, demands a machine tool with exceedingly high r. p.m. to cope with the
speeds necessary, using natural diamond turning tools, together with much greater
rigidity, and even more important is the high vibration damping capabilities required
when using mono-crystalline diamonds. These capabilities are essential in order to
minimise cleavage of the natural diamond tooling cutting edges whilst machining
parts at high speed. As a result of the specialised cutting edges needed for this type
of machining, the tooling and its fixturing tend to be relatively simple in concept.
The CNC diamond turning lathes can machine complex geometric parts as well as
relatively simple part geometries with exceptionally fine feedrates, offering superb
surface finishes. A degree of automation can be incorporated into such machines by
using bar-feeders, or automatic part loading facilities coupled to automatic chucks.
Often these machine tools have unusual work holding facilities utilising, for example,
vacuum chucks and faceplates and other such methods.
This brief review of CNC turning machine tool applications would not be complete
without a mention of the vertical lathe illustrated in Fig. 1.49. Often such specialised
turning machines are used to manufacture large squat and irregular-shaped com-
ponents which may offer out-of-balance problems, or workholding difficulties on
conventional turning machines. Typical of such products manufactured are volutes, or
gear crushing rings which are made from exotic materials which are exceedingly
difficult to machine. As machine tool rigidity is of prime importance on these ma-
chines, with their portal construction being a typical feature, the requirement is for
good torque-low speed power characteristics with high volume production being of
secondary importance in this case. Tooling needs as a result, tend to be of simple, but
robust construction and fine feedrates can be programmed. Owing to the relatively
long cycle times necessary for machining exotic materials, or if rotating out-of-balance
loads, the low volume production which results dictates manual rather than automatic
loading of workpieces. Once again, a simple and strong, but effective method of part
clamping is considered to be of prime importance here.
The diversity of machining centre and milling machine configurations available to
the would-be purchaser is vast and depending upon the part complexity, size and
volume produced, there is a range of machines on offer. The horizontal machining
centre shown in Fig. 1.50 is typical of its genre, offering 4-axis control, 3 linear and
one rotary for pallet/workpiece rotation. An automatic pallet changer with eight
pallets is incorporated with the adaptability of workpiece fixturing and component
diversity being displayed. The photograph shows a range of fixtures on each pallet,
such as: cubes, tombstones, or special-purpose varieties allowing the wide variety of
components to be accommodated from small to large dimensions. It is possible to tool-
www.EngineeringBooksPdf.com
58 CNC Machining Technology
up a fixture to carry many small components on each pallet and this gives a degree of
medium-volume production to such machines. Obviously features such as swarf
conveyors, adaptive control and tool and workpiece monitoring systems can be in-
corporated, together with further "tool banks" when appropriate.
The CNC has to be quite sophisticated in order to cope with all the likely permuta-
tions of component piece-part programs that need to be stored in the memory. Not
only does the controller need a part scheduling ability, it also requires further controls
to orchestrate the relative auxiliary devices included on the machine, typically, a pallet
recognition system, tool management and magazine handling together with touch-
trigger probing software and adaptive control through some form of torque controlled
machining (TCM) capability. These aspects offering a degree of intelligence into the
machine tool will be the theme of further discussion later in chapter 2.
A popular machining centre often used in Flexible Manufacturing Cells or Systems,
is the 4-pallet horizontal machining centre illustrated in Fig. 1.51. Obviously large
machining centres of this type offer great flexibility in the ability to cope with a diverse
range of parts. A key feature with such machine tools is the crucial areas of part
fixturing and cutting tool management, if the benefits from such a costly machine tool
are to be realised. The machine has a sophisticated CNC necessary to carry out not
only the part programs, but tool and machine monitoring through sensors, for example:
adaptive control, tool breakage detection, and workpiece probing, coupled to thermal
drift compensation devices and refrigerated spindle assemblies, plus many more
techniques desirable in the "stand-alone" machine, or ones used in the unattended
machining environment. Machine tools having the likelihood that they will be used in
www.EngineeringBooksPdf.com
The Development and Design of CNC Machine Tools 59
Fig. 1.50. A machining centre (horizontal) with rotary pallet changer. [Courtesy of Cincinnati Milacron.]
Fig. 1.51. A large 4-pallet machining centre (horizontal) with 4-axis control. [Courtesy of FMT Ltd.]
www.EngineeringBooksPdf.com
60 CNC Machining Technology
Fig. 1.52. A moving gantry vertical milling machine. [Courtesy of Asquith 81.]
www.EngineeringBooksPdf.com
The Development and Design of CNC Machine Tools 61
Fig. 1.53. A large 5-axis twin-pallet machining centre. [Courtesy of Cincinnati Milacron.]
linear axes to the table, a rotary pallet motion, with a linear motion to the column and
a rotary axis to the tool head assembly. Such range control over a greater number of
axes allows the cutter orientation to the workpiece to be continually monitored and
changed, giving it the capability to present the cutter normal to the surface which is a
requirement when machining many complex geometrical components. As expected
on such a universally adaptable machine tool, the tool library is of large potential
capacity, and can be extended to even greater size if necessary. These machine tools
may be custom-built, but are expensive. As before, swarf conveyors and the usual
health monitoring equipment for tool and machine protection can be supplied if
appropriate and the CNC in this case is quite a sophisticated device.
By way of a comparison with the large-scale CNC milling machine depicted in Fig.
1.52, the more compact fixed table travelling gantry CNC mill shown in Fig. 1.54 is a
more popular alternative. This machine is more easily automated; tool changing and
axis speeds are less restricted owing to smaller inertial and momentum constraints.
A swarf conveyor is supplied on this machine tool and full slideway protection from
swarf and debris is incorporated into its design. This slideway protection is an
important feature whenever high-speed routing heads are fitted as swarf volume and
velocities are very high. Often these gantry/portal machine tools require hydrostatic
bearings for the table, owing to the large weight capacities that can be held on tables,
as separation pressure between conventional slideways would cause problems for the
smooth CNC linear motions normally required.
To complete this appreciation of just a few of the diverse range of CNC machine
tools available today, a 6-axis vertical CNC machining centre is illustrated in Fig. 1.55.
The table in this case has two linear and one rotational axes present, whereas the
column offers one linear motion with two rotary motions to the main spindle assembly.
This amount of control over linear and rotational axes truly allows the cutter to
machine highly complex free-form geometries to parts as depicted in the photograph.
These machine tools can be programmed directly through the CNC, or more typically
www.EngineeringBooksPdf.com
62 CNC Machining Technology
Fig. 1.54. A fixed table travelling gantry milling machine. [Courtesy of Asquith 81.]
Fig. 1.55. ~ 6-axis machining centre cutting a complex curved component. [Courtesy of Bohner & Kohle.]
www.EngineeringBooksPdf.com
The Development and Design of CNC Machine Tools 63
nowadays, a direct numerical control (DNC) link is established to the machine tool
from a CAD/CAM workstation. As with most of the previous machine tools men-
tioned, this machine, as shown, can be supplied with/without tool magazines and
automatic tool changing equipment as necessary. All of these photographs showing
unguarded machine tools are more usually purchased fully guarded when high metal
removal rates are a major requirement for operator protection.
The metal cutting machine tools described in this chapter are of no practical use if
they are not "tooled-up" with the latest efficient and productive cutting tools. The
first chapter of Volume II discusses the correct tooling philosophy to be adopted, as
well as many other important tooling considerations demanded by any competitive
manufacturing company today.
www.EngineeringBooksPdf.com
Chapter 2
Current Developments in Flexible
Manufacturing Cells and Systems,
Leading to Complete Computer
Integrated Manufacture
2.1 Introduction
In Volumes II and III we will be concerned with a discussion about stand-alone turning
and machining centre technology and related activities, such as tooling, workholding,
and cutting fluids. This chapter will consider how best to achieve a degree of auto-
mation using equipment and looking into the relative merits and drawbacks of such
implementations. Prior to discussing the role of currently available FMClS solutions, it
is probably worth defining what we mean by "Flexible Manufacture" - whether one is
describing either a cell, or a system. The definition favoured by the author is a
modification to that proposed by an early investigation commissioned in America by
the US Task Force Study: "Two or more machines coupled to either a robot, or an
automatic transfer mechanism for the machining of parts". This loosely describes, in
the most basic terms, the requirements for a flexible manufacturing cell; in fact we
must qualify this definition by saying that, according to an FMS builder, such systems
must be "as rigidly flexible as possible!". This means that either a cell or system
should have a degree of flexibility within rigid constraints in order to perform in
anything like a flexible manner.
During the early 1980s, companies were investing in large-scale FMS and often
these were doomed to failure, principally because lack of rigid constraints of either part
handling, tool management, compatible communication protocols plus error-recovery
procedures were not strictly formalised - this is where our rigid constraint is essential.
As a result of the above, many manufacturing departments became somewhat dis-
enchanted with such complex FMS solutions to their variable production scheduling
needs and in recent years have been more inclined to favour the cell approach, or the
progressive integration of stand-alone machine tools into cellular configurations. This
latter technique of a step-by-step approach to FMC integration, allows a company to
not only build up their production capabilities in a proven and steady manner, but
also to minimise the capital expenditure. It is then spread over a longer time-scale,
whilst simultaneously gaining experience and confidence in the assurance that each
machine tool element within the FMC offers real benefits to the manufacturing capa-
bilities, rather than the possibly dubious merits of an ill-conceived and executed
feasibility plan. Any feasibility study must be carried out utilising computerised
www.EngineeringBooksPdf.com
66 CNC Machining Technology
simulation techniques in order to obtain a realistic appraisal of both current and future
manufacturing capabilities, but more will be said on this, and other related topics
affecting production, later in this chapter. Such highly productive equipment placed
into a conventional manufacturing department, without thought to the logistical
problems associated with its implementation, leads inevitably to, at best, bottlenecks
disrupting the harmonious flow of parts, to, at worst, complete failure and chaos
within the company, with "loss of face" for all concerned.
In the following pages, we will try to alleviate such disastrous and ill-fated imple-
mentations, by attempting to describe not only the range and scope of FMCs presently
available, but some of the systems that lead to complete computer integration of the
manufacturing factory, as depicted in the case-study towards the end of the chapter.
Lastly, we will look at how part accuracy is becoming the most important manufac-
turing characteristic and the steps a machine tool builder must be prepared to go to
achieve ultra-high precision workpieces. During our discussion, frequent mention will
be made throughout the chapter, to such topics as "logistics", computer integrated
manufacturing and so on, in order to attempt to give an overview of not only flexible
manufacturing strategies, but integration themes.
In any highly productive environment such as a flexible cell, or system, the through-
put time and capital turnaround are major factors that influence the cost of produc-
tion. Quite simply, the machine tool is just a link in the total chain: from receiving an
order, to part supplying and then invoicing the customer. When considering invest-
ment, it is appropriate in most cases to rearrange and organise any existing manu-
facturing facility, in small steps and over an extended time, rather than building a so-
called "green-field site", as this objective is much less drastic whilst increasing the
utilisation of our present manufacturing equipment in conjunction with the con-
siderable reduction of throughput time. Clearly, this is not a simple task, especially if
one considers that during the amortisation time for such investment, any in-house
production will need to be adapted to an ever more rapidly changing market con-
dition. This fact is true, whether the company is investing in: stand-alone machines,
cells, or systems. The crucial problem is always how this new production facility can
be organised and harnessed to the existing overall manufacturing capabilities. Such a
problem might be compared with a surgical transplant, where all that we know is that
it can only succeed if the body does not reject the new organ, accepting it as a
harmonic unit of the system. Seen another way, we are confronted with interfacing
and communication problems that need to be planned and solved with care, to ensure
that everything will remain compatible after any subsequent investments.
Not only do we expect compatibility from our current and future plant needs, but
also from the human involvement in the manufacturing facilities. FFOm a company's
design, organisation and planning departments the personnel at all levels interpose
control restrictions. between the planning/manufacturing areas, whether computer
support is available, or not. Often, in many production shops there may still remain
several conventional machine tools and associated methods/sequences that are pri-
marily dependent on man, resulting in workpiece calculations for the whole facility
www.EngineeringBooksPdf.com
Flexible Manufacturing Cells and Systems, Leading to Complete Computer Integrated Manufacture 67
being strongly orientated towards the labour rates. Even when a company has taken
steps towards computer-integrated manufacturing (CIM) methods, the effect of man
still plays a part, albeit a minor role. Man is at the focus of any traditional manu-
facturing facility and it is the function of computer-integrated manufacture to minimise
human activity within the day-to-day control process. Furthermore, by utilising CIM it
is possible to reorganise everything in such a manner that computer algorithms can be
used purely for the planning and mechanised sequences of manufacture.
It is not only the management that must be trained appropriately to cope with
changes in manufacturing, but shop-floor level employees also - in the same way as it
is necessary to train somebody in programming aspects when involved with CNC
machines. So far, companies involved in computer-assisted manufacturing have found
that the demands on operating personnel do not reduce, but can be considerably
higher than for conventional routes of manufacture - often termed "job-enrichment"
in the United States. This term encompasses the concept that an enriched quality
of working life results from operators being associated with flexible manufacturing
systems. There are many more aspects of responsibility for the operator in an FMS
system than for the operator running just one machine tool. As a result, FMS oper-
ators need to have a broader view of manufacturing. Instigating a third shift together
with some weekend working will only be viable from a sociological point of view if the
manufacturing system can be successfully buffered in the first and/or second shift,
then run with limited manpower on the third. A third shift cannot yet be run in an
unmanned "lights-out" operation. That situation is still a few years away, in terms of
total integration of hard/software functions. As a result, the unattractive night shifts
will perpetuate, together with weekend working, for some time to come, requiring
certain key personnel for either supervisory or maintenance tasks. Such working
arrangements mean that problems will remain in terms of the pay structure and social
politics area until these points are resolved.
Formulating a manufacturing facility into an unmanned environment is limited by
the amount of additional and out-of-proportion expenditure; particularly when short
part-cycle times exist, the costs for fixtures, pallets, buffer stations etc. will, in most
instances, prove uneconomical. This point is thought to be relevant when one con-
siders the personnel savings - or lack of them - as a result of much manpower effort
being expended simply loading and unloading parts in the preceding and subsequent
shifts, respectively. This makes a nonsense of our reasons for automating the manu-
facturing process in the first place.
Many companies deciding to invest in flexible manufacturing cells or systems would
normally instigate such technological innovation in a step-by-step expansion - unless
a "green-field" site was chosen for this new production facility. About 30% of all
flexible manufacturing systems are planned as an integrated and "overall" concept in
a single or double expansion stage. Companies investing in such systems are normally
"batch-producers", who have the advantage of being able to take the step to flexible
manufacture clearly and decisively, leaving behind the concept of rigid manufacture.
Without question, these companies adopt this manufacturing strategy basing their
investment strategy on the unequivocal desire to be able to react in a more rapid and
flexible manner to fluctuations and changes in market conditions. It is also apparent
that company investment strategies consciously accept certain cost increases which
arise through this demand for flexibility. The diagram shown in Fig. 2.1 illustrates
that as far as "pure" manufacturing costs are concerned, the route towards greater
flexibility will inevitably lead to higher production costs. Although these additional
costs incurred can, to some extent, be offset by new disposal strategies typified by
"just-in-time" inventories.
www.EngineeringBooksPdf.com
68 CNC Machining Technology
,..:
Z
\oJ
r.
...>
0-
V'>
:::
....
o
0-
V'>
o
'-'
PRODUC rrvlTY.
Fig. 2.1. A comparison of manufacturing systems based on the following criteria: automation level,
productivity and investment costs. [Courtesy of Scharmann Machine Ltd.)
www.EngineeringBooksPdf.com
Flexible Manufacturing Cells and Systems, Leading to Complete Computer Integrated Manufacture 69
b
Fig. 2_2. The importance of logistics as a company strategy_ a The concept of integrated logistics_ b The
"key" sectors of logistics in manufacture_ [Courtesy of Scharmann Machine Ltd.]
block diagram in Fig. 2.2a highlights the theme of integrated logistics as conceptually
realised by a machine tool manufacturer.
In logistical terms, for all departments participating in processing the order, basic
deadlines must be calculated in terms of network plans. Simultaneously, the projected
estimated capacities are loaded into these bottlenecks and a position plan is produced
for the optimum exploitation of the manufacturing space. Such deadlines are re-
peatedly matched with those in specialist departments, until an agreed schedule has
been defined and area capacities have been smoothed out. The established basic
deadline framework is the binding target for all participants and the reference for all
alterations. Acknowledgement of these scheduled activities will ensure that an im-
mediate follow-up of the order occurs. Therefore, if deadlines are exceeded, methods
are directly sought to compensate for any delays in the schedule. Such rules ensure
that it is not left to the final (assembly) stage before attempts are made to reduce
delays, but that prompt action occurs early on and at every stage of order processing.
From a customer's point of view, this means that information about an actual order
status is always available and in general guarantees the meeting of their anticipated
delivery dates.
www.EngineeringBooksPdf.com
70 CNC Machining Technology
More precise planning normally occurs in the areas of production planning and
materials management, with the basis here being the part list's orientation and its
influence on final assembly of product. In a similar fashion - in terms of material
requirements - it provides a clear deSCription of the order relating to deadlines and
capacities in the working schedule for, say, a mechanical fabrication, or the coordi-
nation of detail for assembly activities. It is, of course, very important to have a
homogeneous transition from a rough to precise planning stage, for there to be an
acceptable overall planning strategy. Furthermore, any activities that have been
specified at the rough planning stage will be progressively replaced by precise plans
once the period of order processing has begun.
When an order network has been derived from the parts list, any fabrications and
assembly orders belonging to a customer order are related to each other and this will
immediately highlight any mutual dependency of products. It follows that the con-
sequences of any interruptions in the run of work can be easily established and
countermeasures introduced.
The organisation of CNC activities, such as preparing, administering, and distri-
buting all the information necessary for such machine tool operations, is largely
concerned with either the production of individual, or job-lot manufacture. Inte-
gration of CNC activities can be incorporated still further into the logistical strategy by
having computer-aided production planning with a CNC programming system -
possibly CAD/CAM integration, with direct numerical control links established to
both the machine tools and tool preparation facilities.
Finally, for new and modified designs, it is of the utmost importance that in the
early stages of a product's design any work is closely supervised, with effective
communications established in order to eliminate possible sources of error and there-
fore difficulties, before one gets to the final manufacture and assembly stages.
The importance of logistics in the company's manufacturing strategy is shown
schematically in Fig. 2.2b, where it acts as a focus for integration of rough and
production planning, material management, machining and assembly planning. This
coordination of multiple planning functions highlights problems prior to and during
manufacture, smoothing-out bottlenecks, minimising errors whilst manufacturing,
and considerably shortening product development times. By incorporating the theme
of integrated logistics within a company, a framework is provided for a "simultane-
ous" - or as it has recently been termed a "concurrent" - engineering strategy to be
developed. This technique has shown conclusively that it will drastically reduce and
simplify new design concepts and shorten product lead to the market, with all of the
implied cost savings.
Before a company decides to purchase a flexible manufacturing cell, or system, it
must carry out a feasibility study, considering not just the parts (and their costs) to be
manufactured within such a facility, but the implications of placing highly automated
plant into the current production area and how it might affect the harmonious flow of
parts through the factory. As such, it is often necessary to simulate the plant within
the constraints of the manufacturing department to gain an appreciation of likely
problems. These topics we will now address, before looking in detail at typical
automated installations to be found in most advanced countries in the World today.
www.EngineeringBooksPdf.com
Flexible Manufacturing Cells and Systems, Leading to Complete Computer Integrated Manufacture 71
to be assured that such a large capital outlay will considerably improve the company's
performance for its perceived market. The design, its development and installation,
can be thought of in three distinct stages:
project planning and realisation
system integration into manufacture
project responsibility
In order to achieve a successful implementaion, the feasibility study can be sub-
divided into three further categories:
first stage - a quotation planning study
second stage - an order planning and FMS quotation
third stage - ordering the FMS and its project management
Let us now look more closely at each stage to try and build up a picture of how one
might instigate and develop a successful flexible manufacturing system.
First, we must consider the amount of work involved in the logistical implementation,
which would take into account an analysis of the expected workpieces to be manu-
factured, normally grouping parts of similar geometries, or processes, together -
termed "group technology". It is then important in the preparation of the concept
to document in some detail, all pertinent facts. Simultaneously, a team of inter-
disciplinary engineers is chosen who will embrace a range of technologies, system
planning, and the computer systems to be utilised within the perceived FMS. Once
these factors have been established, it is possible to calculate the costs, draw up a
quotation and present it to the company's management for acceptance.
From now on, feasibility activities become more inter-related and a detailed examina-
tion of workpieces to be machined occurs with part families being firmly established -
the "group technology" theme again. Part fixturing concepts are explored and if
necessary pallet sizes are decided. Concurrent activities of mutual interest concerning
the workpieces are collated and data relating to the whole machining process -
including the means of manufacturing part features are determined, together with the
concept of their storage: pallet pools, stillage stations, buffering and the part trans-
portation system to be incorporated - either rail- or wire-guided AGVs, flexible flow
systems, robots (floor, or gantry types). Simultaneously, peripheral equipment (sub-
systems) is specified which will influence both the FMS layout and its productive
capabilities. Machining times, together with the computer and transport systems, will
have a considerable impact on the prospective plant layout, and their preselection at
an early stage is necessary. This will focus our attention towards possibly two, or at
most three, potential systems that can be "modelled" by simulation (see section 2.2.2).
The critical stage has now begun where one attempts to establish a representative
"model", around which all our final decisions are made. The alternative simulation
"models" will define: the system layouts, material supply routes, tool handling stra-
tegies, and compare the chosen "models" under realistic production conditions,
www.EngineeringBooksPdf.com
72 CNC Machining Technology
By now, the team involved in the feasibility study will know all the relevant facts,
enabling them to be in a position to award a contract, with the assurance that such a
study has highlighted the expected advantages and weaknesses in the manufacturing
concept. Hopefully, the latter problems are only of a minor nature and will not unduly
affect the project. With the contract awarded to either a single-source vendor, or a
multi-sourcing with overall project supervision by a specified company, such details
as production planning and system design can be developed from the functional
specification. Whilst this is being undertaken, training and, later, works acceptance
will eventually occur - usually on the vendor's site. Sometimes when a large system
rather than a cell is built, it would be installed at the company's manufacturing facility,
which would have the correct infrastructure by now in place, with foundations and
services prepared at an earlier stage in the project.
Assembly of the complete installation including machine acceptance trials, periph-
eral equipment acceptance and computer system integration, is established and as
usually expected, a direct numerical control link to the in-house CAD/CAM system
occurs. Lastly, a complete justification for the whole manufacturing facility installed is
initiated, where run-offs of parts within the system are compared with the master
schedule laid out during the project's conception, so that the company is assured
that the installation is meeting its productive requirements. After acceptance by
the company, a close working relationship will have been established between the
customer and vendor and this continues into the guarantee time and often beyond.
Any prudent company deciding to install such highly sophisticated and compre-
hensive equipment must, of necessity, conduct a well-disciplined and planned feasi-
bility study in order to ensure that the project achieves its manufacturing objectives.
Such a study will then be sure to come in at cost, on time and having the desired
production capabilities. We have seen that possibly the key element in any prospec-
tive dynamic part-scheduling facility, namely a flexible manufacturing cell, or system,
requires simulation to ensure that it meets the functional specification developed
during the company's feasibility study. This can be "modelled" either with an in-
house simulation system or, more usually, by the vendor's system. In the following
section we will consider the "simulation modelling" in more detail, looking at two
currently available systems.
www.EngineeringBooksPdf.com
Flexible Manufacturing Cells and Systems, Leading to Complete Computer Integrated Manufacture 73
In our discussion we will consider only the latter two languages - "ACTIVITY" and
"EVENT"-based - as they apply specifically to the batch manufacturing found in
flexible manufacturing production. Any "ACTIVITY"-based language considers the
start, duration and end of an operation as just one activity, with the various resources
coming together to undertake a sub-routine. Only after this sub-routine, such as
loading/unloading the machine tool, has been completed will the clock advance. In
the case of "EVENT" -base languages, each event is considered separately with the
clock advancing at each time there is a change of state and with our last example,
loading and unloading would be described as separate events.
The simulation process can be basically considered in three stages:
system definition and creating the model outline with captured data
writing/proving out the electronic "model" within the computer
operating and redefining simulation runs until acceptable results are obtained
www.EngineeringBooksPdf.com
74 CNC Machining Technology
As one would expect, creating a system "model" is the most demanding and critical
stage of the simulation process; furthermore, as the computer simulates this "model"
and not the system, successful operation depends on how accurately the "model"
represents the system. The well-known saying "garbage in, garbage out!" means that
our model developed is only as good as the data gathered. The "model" includes
structural and physical relationships combined with the system's time-based inter-
actions; so, by defining our problem and highlighting critical points whilst collecting
data - this being difficult and time-consuming - then building/validating the "model",
we will obtain a realistic representation of simulation.
When "model" building, the programs can range from those that are mathema-
tically-based - having a complex structure developed with a knowledge of high-level
computer languages, such as Fortran, enabling it to run using powerful simulation
programs - to these running on microcomputers in such a way that "modelling" is
invisible to the user. The more powerful discrete event simulation methods are
usually used with mainframes/minicomputers, but some systems have specific hard-
ware developed. These systems are more specifically used by expert programmers
and are designed to handle any problem capable of being "modelled" in discrete
event form. Such "modelling" is a long process requiring a thorough understanding
of the system, although one system has reduced the keyboard input time using a front
end code generator, which is an additional program enabling an interactive input of
"model" data in English.
The number of visual interactive systems is increasing, allowing non-experts to use
the programs, being in effect validated "models" into which the prospective system
"model" is fed. As such, these systems are particularly relevant for "modelling"
flexible manufacturing systems, or when tool management systems neeq. to be simu-
lated. This is not a limitation compared with the more sophisticated simulation pack-
ages, as it allows the non-expert to understand the software functions more easily,
whilst gaining confidence in programming. For this reason, these data-driven visual
systems are gaining acceptance - particularly since they cost a fraction of the high-
level programs, whilst being much easier to use. Possibly the main benefit of the
visual interactive systems is that they give the user an easy means of explaining the
system "model" to the decision-makers within the company. This on-screen pictorial
mimic which has an interactive ability is much more acceptable to management than
the more commo.n but traditional tabular output of simulation results.
As we have seen, the more powerful systems require experts, taking time and
requiring proficiency in programming ability; this inevitably confines such systems to
areas where cost-effectiveness becomes paramount. Whatever simulation system is
chosen for the task, whether the manufacturing project is complex or relatively simple
to simulate, then the preliminary planning should not account for more than 1% of
the project's capital cost. The preliminary model created would be appropriate for
additional detailing in order to fully test and optimise the proposed system. Any
further detailing to the simulation depends upon the complexity of the system, but
also the "law of diminishing returns", meaning any direct savings found by further
enhancement of the model, must be levied against greater costs. Typically, the cost
of gaining proficiency in the simulation system and its annual running costs can
approach £30000 - for an advanced system that is fully capable of general use, and
whose cost must be taken into account.
With some companies, having an in-house simulation system is vital, but whenever
a company needs to "model" only occasionally, then it might be more appropriate to
use a consultant. Using a consultant to build the simulation "model" can be achieved
at a fairly low cost, prior to the heavy investment needed to assess the feasibility of
the proje<;t.
www.EngineeringBooksPdf.com
Flexible Manufacturing Cells and Systems, Leading to Complete Computer Integrated Manufacture 75
In Fig. 2.3 a range of simulation "models" can be seen, depicted in either cells
or systems, produced by two of the leading simulation software companies. The
"models" shown in Fig. 2.3a-c are presented to the user in a plan form, whereas the
"models" shown in Fig. 2.3d-f are oblique views of the simulation. In both cases a
range of colours can be used to identify the dynamic moving elements, such as
pallets, or automatic-guided vehicles and at any time the machine utilisation rate,
personnel utilisation, product routing and quality control objectives can be assessed in
a real-time sense. By running the "models" over a specified time-base it is possible to
see if "bottlenecks" occur at certain times and by amending the layout - introducing
either new machine tools, or re-routing parts - "what/if' conditions can be assessed.
Therefore let us consider the logic used in Fig. 2.3a-c; the "models" are described
in terms of "entities" which engage in "activities. An "entity" represents a resource,
such as a CNC machine, robot, conveyor, or palletised part, whose behaviour is being
simulated, whereas an "activity" is the state in which an "entity" remains whilst an
operation takes place over a period of time. The time of the "activity" is previously
calculated and once it has begun it continues for the time duration, unless the logic of
the "model" allows the process to be interrupted. For example, a machine tool and
its associated workpiece might be engaged in a specific machining operation which
could be interrupted by, say, a breakdown. When an "entity" is not involved in an
"activity" it waits in a "queue"; thus a machine might wait in a "queue" when there is
no part for it to currently machine. With any "entity", attributes can be used to
describe it in greater detail, for example, a machine tool's attributes would be its
speed, range of operations it can perform, and the last time it has been maintained.
The life of a typical "entity" might consist of several "activities" and "queues" and the
manner in which "entities" travel around the "model", from one state to another, can
be represented in an activity cycle diagram (not shown).
When one requires to change the status of the "model", then by cycling through the
three dynamic conditions of "start", "time" and "end", further what/if conditions will
result and help the programmer to assess the "models" viability. Let us look a little
closer at these three phases:
"start" - checks the conditions of each "activity" in tum to see if any can start. The
"activity" number establishes the checking sequences and obviously the priority
between competing "activities". The logic dictates that an "activity" may only start
if the approprate "entities" are available in the correct "queues". If an "activity" can
begin, the "entities" are moved from their respective "queues" to the "activity",
with the time being written next to this "activity"
"time" - this is needed to locate the "activity" or multiple "activities", with the
earliest end time and advances the simulation clock to this time
"end" - the "activities" due to finish at the new simulation clock time; it moves the
"entities" to the destination of the "queues". At this point, the "activity" returns to
the "start" phase
Such simulation practice proceeds for as long as necessary, to verify the logic,
observe behaviour of the "model", or to collect statistics.
The simulation "models" depicted in Fig. 2.3d-f, allow a dynamic simulation
package to be used, producing complex and realistic "models" through a ''building
block" approach, making a knowledge of programming unnecessary. "Models" are
built using a series of "blocks" which prompt the user to input information that
accurately represents the process to be simulated. These ''blocks'' take the form of a
logical sequence that makes the "models" easy to read and understand, with on-
www.EngineeringBooksPdf.com
a b ~
ICEV
••0 ••• 8
:.l..A!J11
lin U1"il ~
()
Z
()
Fig. 2.3. Two simulation software packages illustrating how the
efficiency and potential feasibility of prospective FMS/C can be
~
assessed and then run over a preselected time-base to determine
2:
"what/if" conditions in a dynamic situation. a-c This package high- ~.
www.EngineeringBooksPdf.com
lights a range of plan views of both FMS/C models. d-e Oblique
simulation of an FMS, showing the dynamic time-base changes in ~
manufacture and its "zooming" capabilities. [a-c Courtesy of P-E [
Consulting Services. d-f Courtesy of Cimulation Centre.) ~
Flexible Manufacturing Cells and Systems, Leading to Complete Computer Integrated Manufacture 77
QI
www.EngineeringBooksPdf.com
78 CNC Machining Technology
Fig. 2.4. A simulated robot-loaded turning cell with "hidden line removal" , used in feasibility studies for
cells/systems. [Courtesy of BYG Systems Ltd.)
screen prompts to further enhance the documented. flowchart. Once the "model"
has been completed, then what/if experimental data is read prior to performing a
simulation run.
The graphics are so designed that even a novice can develop 3-dimensional colour
layouts, allowing the user to see the process in operation relatively quickly. An
interactive feature can be called-up to help analyse what is happening to the "model",
allowing the user to step through the "model" whilst watching the graphics being
continuously up-dated. Alternatively, the simulation can be run until a certain con-
dition occurs, then halted to establish the reasons for occurrence. A menu generator
can be used allowing the "model" builder to develop a series of menus, enabling the
simulation to be operated by an unskilled user. Such menus allow variables to be
modified, then the data collected and stored for subsequent analysis. Data can be read
from existing computer files so that a simulation " model" can be loaded with an up-
to-date start position. If a user has a knowledge of computer languages, there are
interfaces for Fortran and "C" subroutines. CAD drawings can be displayed onto the
screen so that movement can be superimposed onto the most complex of backgrounds.
A partial view of the dynamic simulation model can be seen (see Fig. 2.3d,e) and
where an area of special interest occurs, then a zoom facility enables the user to
observe the "workings" of the model in greater detail (Fig. 2.3f). The complex "model"
can be observed at any time and the "model" will continue to run in real-time, even
when one moves ahead to a new time-frame to see what might be happening at that
time to the "model" .
www.EngineeringBooksPdf.com
Flexible Manufacturing Cells and Systems, Leading to Complete Computer Integrated Manufacture 79
www.EngineeringBooksPdf.com
80 CNC Machining Technology
The machine tools and peripheral equipment discussed so far function more than
adequately in a "stand-alone" form which is by far the most popular method of
production layout used by companies today. If this is the case, why do we need to
invest large capital sums and increase the complexity of manufacture by using an
FMC/S? There are some important reasons why such a plant configuration is nec-
essary, not least of which being the opportunity to increase the company's profits
whilst gaining a return on capital; possibly even more important is allowing the
company a degree of flexibility to react to market and design changes. It is true to say
that only certain production environments can truly gain from the implementation
of such automation (see Fig. 2.1). Furthermore, this statement can be qualified by
maximising the main advantages to be gained from total flexibility - a difficult test at
best - and focusing upon a "Croup Technology" (CT) approach to manufacture.
Using this "CT" philosophy to obtain maximum benefit from the plant, processes are
either grouped together in the form of a cellular manufacturing facility, or workpieces
- where common features require similar production methods - further improving the
cell's efficiency. Possibly the major advantage of such a flexible approach to the
manufacture of parts is the unprecedented opportunity to drastically slash the hidden
costs of production such as: work-in-progress, overheads and indirect labour. Any
inroads that can be made into such areas will be a significant saving within the
company, with the additional benefits being:
untended operation on third shift, or minimal manning on day shifts - reducing
labour costs
improved machine tool utilisation
50% reductions in any work-in-progress
setting up times reduced
workpiece accuracy of more consistent quality
production techniques standardised
delivery times shortened
planned maintenance procedures - giving capital equipment a longer life
less floor space for plant - as manned access is minimised
opportunities for part/tool inspection during the machining cycle
part scheduling and re-routing of workpieces during planned maintenance, or un-
anticipated machine failure
interfacing to: MRP, MRPII and CAD/CAM peripherals through DNC links
www.EngineeringBooksPdf.com
Flexible Manufacturing Cells and Systems, Leading to Complete Computer Integrated Manufacture 81
Fig. 2.5. Turning and verticallhorizontal machining centres in an FMC configuration together with robot-
loading rail-guided vehicle. [Courtesy of Cincinnati Milacron.)
centre have been connected together by a rail-guided vehicle (RGV). This RGV has the
ability to supply preset palletised parts by the carrier via the pallet stocker, or tooling
from the tool centre. There is a two-way dialogue between the machine tools, peri-
pherals and the system computer at all times, which up-dates, or re-routes work (in the
case of an anticipated shut-down of one of the machining centres) with continual part
tracking and tool scheduling/up-dating. In such a manner high machine tool utilisa-
tion can be achieved - over 90% efficiency is possible throughout the working day.
This type of FMC can be seen throughout many of the industrialised countries of
late and gives a degree of flexibility of production within reasonably rigid constraints,
in that such systems have often been called "prismatic cells" - but even here one must
be careful to qualify this statement, as some rotational features can always be accom-
modated using either interpolation techniques, or special-purpose "U-centre" milling
heads. Such cells can start with just two machine tools, then be progressively built up
to a complete machining complex, comprised of six, or more, machining centres.
However, when one reaches this level of complexity then it becomes important not
only to utilise floor space effectively - often if this is to be the case, then staggering
machine tools on alternate sides of the rail is necessary - but in addition, adding
further RGVs to serve the extra machining centres. It is advisable by now to have
completed a simulation of the enlarged cell layout, to obtain the maximum benefit
from not only the extra machines, but the best utilisation of the RGVs proposed to
service these machines (see section 2.2.2).
If a company is predominantly machining parts complete from bar stock cut to
prescribed lengths, rather than the general machining of prismatic features, then a cell
with a configuration similar to that shown in Fig. 2.5 might be the answer. Here, a
rail-guided vehicle has a load/unload robot situated upon it and it is free to move up
and down the track supplying parts to the turning centre, or the verticallhorizontal
machining centres. Normally such an FMC would be fully guarded in the vicinty of
www.EngineeringBooksPdf.com
82 CNC Machining Technology
the track and robot's moving elements, but for clarity this has been removed. As parts
to be made by such a cell often differ only marginally in detail - the "GT" philosophy
again - then the cell controller (shown in the foreground) can be of a much simpler
design and of relatively low-level sophistication. This is prudent, as it reduces both
the cost of the overall supervision, often needing only a programmable logic controller
(PLC) to fulfil the production requirements, whilst having the major advantage of
simplifying error-recovery - one of the greatest problems associated with down-time
on FMCs - but more will be said on this topic later.
The pre-cut bar stock is stacked onto a workstation in such a manner that the
robot's gripper can grip the parts easily - a range of delivery solutions can be used
here to simplify either programming of the robot, or identify differing stock diameters
and lengths - such as gravity feed chutes for parts, or flexible flow systems with
automatic size identification and buffering incorporated into the equipment. Part
delivery is not the major problem, however, as component fixturing, scheduling,
monitoring and robot delivery is more critical - but even here, if both the dynamic
simulation layout in combination with robotic simulation has been previously under-
taken, this latter problem will have been addressed.
Whenever a company is likely to embark upon the development of a cell into a
totally integrated system often covering a considerable floor space within the pro-
duction facility, then there is some justification for elevating the supervisory control
room over the plant so that engineers are positioned strategically above the facilities
and have a clear view of the equipment. Usually such an environment is clean,
relatively quiet and air-conditioned, which is an important point, as such personnel
must spend considerable time within this area. Equipment in this control room will
not only monitor the immediate and everyday functions performed on the machine
tools - tool management, part status, scheduling, SPC - but is connected to the
"outside world", to other departments, through communication links - ethernet,
manufacturing automation/technical office protocols (MAPITOP) - or even to other
companies involved in Just-in-time OIT) or similar activities.
The strategic placement of the centralised and elevated control room is critical to
any further plant to be added to the cell at a later stage, as visual confirmation of
machine tool and peripheral equipment status can be verified accordingly. However,
even when the most well-planned floor layout has been built, there comes a time
when the simple visual confirmation of a manufacturing activity becomes counter-
productive and under such circumstances the real-time dynamic simulation takes on a
greater significance for part status confirmation within the control room.
Often when a company is involved in a "highly-focused" production activity, then
it is important to obtain the most advantageous machining capability possible by linking
similar manufacturing processes together. In order to minimise possible work-in-
progress activities, parts might be palletised and conveyed around the cell, then loaded
by a gantry robot to a turning centre. This machining philosophy is used in the two
machine turning cell described below. The workpieces might be loaded onto "coded"
Europallets - several at a time and then delivered to each machine tool. Part scheduling
is accomplished by a supervisory cell computer situated on one of these machines and
can be used to a range of work-related activities such as: machine control, logistical
part handling, tool strategy and management, together with machine monitoring.
Such a controller, as one might expect, is MAP compatible and is not only easy to
understand and use, but offers significant advantages in any error recovery situation.
Not only does the cell have the ability to automatically load workpieces into the
turning centres, but a gantry robot can be used to change complete chucks for another
rescheduled part without stopping the manufacturing process. It might also be used
www.EngineeringBooksPdf.com
Flexible Manufacturing Cells and Systems, Leading to Complete Computer Integrated Manufacture 83
two axis turning centre, supplied with modular (block) quick-change and "sister"
tooling, programmable tailstock and chuck, with swarf conveyor
three/four axis vertical machining centre, with modular (varilock) tooling, program-
mable vertical chuck, tool breakage detection, adaptive control and touch-trigger
probing, with swarf conveyor
coordinate measuring machine of cantilever design, with motorised touch-trigger
probing which can be controlled through either a micro-vax, or pc, for full colour
graphics programming
six-axis electrical robot, having a special purpose back-to-back (offset movable jaws)
gripper, hydraulically operated
cell controller with built-in CRT, having both a "QWERTY" keyboard for program-
ming cell production requirements and special-purpose controls for: interrupting
program cycles, inspection calls, changes of batch sizes, etc.
optical tool presetter with on-line tool offset facilities
direct numerical control link to CAD/CAM equipment for completely automated
design, manufacture and inspection
www.EngineeringBooksPdf.com
84 CNC Machining Technology
Fig. 2.6. A typical FMC installation (developed by the author and a machine tool manufacturer) at
"commissioning stage" during the late 1980s. Initially, the cell was comprised of a slant-bed turning
centre, a vertical machining centre, a 6~axis robot and a coordinate measuring machine. Later additions
included an optical tool presetter and modular quick-change tooling, together with a CAD/CAM DNC
link. [Courtesy of Southampton Institute/Cincinnati Milacron.)
Fig. 2.7. Detail of the robot's gripper in the "Southampton cell" designed by the author. The hydraulically
operated and offset back-to-back gripper has synchronised movable jaws, enabling fast load/unload of the
parts (i.e. of varying diameters) and close access to the workholding equipment. NB: Jaw faces/ends can
be quickly changed. [Courtesy of Southampton Institute/Cincinnati Milacron.)
www.EngineeringBooksPdf.com
Flexible Manufacturing Cells and Systems, Leading to Complete Computer Integrated Manufacture 85
control must be managed through the cell controller. This necessitates operating the
equipment in the "cell mode", which is achieved by simply pressing the suitable
button; however, before the cell can run, it is necessary to ensure initially that both
machine tools are in "cell mode" and their axis and other peripherals are set to zero.
The robot axes need to be datumed and set to zero and this is achieved at the cell
controller by simply holding down a button whilst all six axes are set. Confirmation of
each axis appears on the CRT display. Assuming that an appropriate number of pre-
cut billets have been loaded onto the workstation, then fhe batch size can be stated
and confirmed in the controller - assuming the respective part numbers have been
called up from the CNCs on each machine tool. It is possible to identify over thirty
discrete part programs for mixed batch manufacture within the controllers and these
are assigned by the operator at will. Once these preliminary details have been estab-
lished then the robot will move to pick up the first billet once the run command has
been activated (Fig. 2.7). If the part requires turning, then the robot picks up the billet
and moves toward the turning centre whilst signalling the turret to retract which
opens up an access hole for the gripper at the back of the turning centre. At the same
time, the programmable tailstock " latches-up" and a compressed air pipe connected
to it blasts a stream of high velocity air at the chuck. This chuck, in turn, slowly
rotates in order to remove any unwanted swarf trapped from a previous machining
cycle. The robot gripper will move to load a billet into the chuck - the tailstock having
previously "latched-down" and the air blast ceased and chuck stopped - the billet is
gripped by the chuck and the robot retires from the working envelope. The turret
comes forward and closes the hole at the rear of the machine and the part program
generates the desired features on the part. Simultaneously, the robot returns to
the workstation, picks up another billet for this batch and waits whilst the initial
component is machined. At the end of the machining cycle the controller signals the
robot to advance into the working envelope of the turning centre - having previously
withdrawn the turret for access by the gripper; the gripper supports the part whilst
the chuck jaws open and retires a short distance. The tailstock "latches-up" and the
chuck rotates under the air blast, then lowers again, ready for the robot gripper to
load the next billet, as before. It then retires from this vicinity, through its access hole
and the machining of the second part begins.
It is worth pausing here to consider a problem that might have been difficult to
overcome if it had not been anticipated. As the bar stock has had its "gripping
diameter" reduced, this could mean that a very complex robot program needs to be
developed to cater for a range of differing turned diameters, as the centreline of the
robot will have changed with respect to the part. However, owing to the fact that both
gripper jaws can move in synchronisation, the "gripping diameter" will not influence
the robot's program. Furthermore, with the back-to-back offset design of this gripper
(Fig. 2.7), it has the ability to get close to the chuck jaws, enabling it to manipulate
small parts adequately. Finally, owing to the application of hydraulic pressure, it is
possible to restrict the flow of oil and in this manner control the pressure applied by
each jaw on the part, minimising damage on thin-walled components.
The robot will now swing around to face the side of the machining centre (Fig. 2.6)
and the sidedoors are signalled to open, whilst the machine's table with its automatic
vertical chuck will be in the desired position to accept the workpiece. The robot
reaches into the working envelope of the machine tool and loads the turned features
into the vertical chuck, which once again is hydraulically operated and of variable
clamping pressure. It then retires and the doors are closed allowing the part program
to machine the necessary prismatic features and some rotational features, utilising
circular interpolation, if necessary.
www.EngineeringBooksPdf.com
86 CNC Machining Technology
Whilst this activity is continuing, the robot picks up its third billet and waits whilst
the turning centre completes the second workpiece. It then goes through the identical
unloadlload sequence previously mentioned and with the third component machined,
it now has the option for several activities:
waiting whilst this part is completed and then unload/loading the part into the
machining centre - assuming it is the final part in the batch
picking up a fourth billet and waiting whilst the turned part is completed and loading
that into the turning centre, whilst placing the second partially completed com-
ponent onto the workstation. This is assuming, of course, that the machining centre
cycle time is much longer than that of the turning center's. In fact, it may require
several parts to be buffered in this manner, whilst the machining centre is still
operating
loading a partially completed part into the coordinate measuring machine, if an "in-
spection call" has been activated. This could have been done to the first component
as a "first-off" inspection procedure, if required
an interruption to this batch could have been decided to be necessary by the operator
at the cell controller and different part programs would have been called-up from
the unique identifiers within the turning centre's controller and the robot would
load another billet when the third part had been completed
NB: The buffered partially machined components can be completed at will, when-
ever necessary, as it simply requires them to be picked up and machined to the
desired part program. The position of each part is known within the cell's logic by the
unique software developed for this cell.
Such flexibility of production and the options performed at any and every stage of
the part's manufacture, gives one the capacity to respond quickly and efficiently to
changes in production, quality problems on the machine tools (i.e. using touch-trigger
probing), or alternatively, at the post-machining stage using the CMM. There are
many more subtleties of both production and monitoring of either parts, or tools, that
could have been mentioned, but not in the space provided. It should be clear to the
reader by now that there are highly productive advantages to be gained by such a
flexible manufacturing cell installation.
The flexible manufacturing cells discussed so far have either been built up in a "step-
by-step" approach, or as "turn-key" installations. FMSs, by their general nature, tend
to be of greater complexity, whilst being situated over a larger area of the manufac-
turing facility. Such a large and complex installation means that either part- or tool-
delivery systems to the individual machine tools need to be considered. A typical
method of delivery used is that of the AGV (automated-guided vehicle, Fig. 3.26,
Volume lI) previously mentioned in section 3.8.1, Volume II. In such an FMS environ-
ment, the freedom gained in situating plant in the optimum configuration within the
geographical layout of the manufacturing facility can be achieved, which would be
much more difficult to attain using RGVs (rail-guided vehicle delivery systems; see
Fig. 2.5).
A workpiece can be located onto its respective "coded" pallet and loaded through
the machine tool's pallet-changing mechanism into the working area of the machine
using an AGV. It is also possible to transfer simultaneously a part previously machined
on its "coded" pallet back to the AGV and away for either further machining, or back
to the centralised load/unload station. It is worth restating at this point, that such
www.EngineeringBooksPdf.com
Flexible Manufacturing Cells and Systems, Leading to Complete Computer Integrated Manufacture 87
Fig. 2.S. An FMS illustrating "pallet pools" strategically positioned for easy access of the wire-guided
AGVs. Note the elevated control room. [Courtesy of Cincinnati Milacron.}
"coded" pallets need to be uniquely identified in order that the desired part is loaded
onto its anticipated machine tool and that the correct part program is down-loaded
from the machine control unit into the "active" memory area of the CNC controller.
Such scheduling of parts, tooling, programs and so on, are the task of the host
computer, which can dynamically schedule and re-schedule parts within the FMS as
dictated by the contingencies of the "master schedule", or anticipated/unanticipated
machine tool interruptions. Pallet "coding" for efficient workpiece tracking within the
FMS can be uniquely identified in a number of ways and just some of these ways were
described in section 3.8.1, Volume II.
AGVs can also be used to unload a magazine, or chain magazine of tools to either
replenish a "sister" chain, or present a "new" range of preset.tooling to the machine
for further jobs, whilst simultaneously removing the "old" tool chain magazine and
transporting it back to the presetting facility. In such a manner, tooling/workpieces
can be quickly and efficiently loaded and unloaded to the FMS machine tools and
other devices, such as: wash-stations, coordinate measuring machines, pallet-pools,
servicing facilities, etc., according to the dynamic dictates of the scheduling require-
ments demanded by the host computer.
The machine tool just discussed, might well be part of a large-scale FMS as depicted
in Fig. 2.8. In this installation in Phoenix, Arizona, USA a large-scale "tum-key"
facility has been installed with numerous machine tools, having AGVs, "pallet-pools"
and so on, controlled from an elevated control room, where the minimum of staff can
supervise the smooth running of this FMS. Obviously, during the running of such
plant, it is necessary for a certain amount of support staff to be present for tool-kitting
and maintenance, but whenever practicable the facility can be minimally-manned
during the night shift, as parts will have been buffered at the "pallet-pool" stations,
together with additional "sister" tooling delivered to the machines as production
demands dictate. This system is particularly noteworthy in that one major machine
www.EngineeringBooksPdf.com
88 CNC Machining Technology
tool company was responsible for the complete FMS, from feasibility, through to
customer acceptance/commissioning. This is an important point in a fully integrated
and operational FMS, as one company has overall responsibility for the project from
inception, through to completion. This means that the customer knows exactly who to
contact with any queries regarding the day-to-day problems that might arise, whilst
the machine tool supplier is in a position to fully support the customer's needs speedily
and efficiently, without recourse to further dialogue with yet other companies in-
volved in the FMS installation.
As one can by now appreciate, such a high level of computerised equipment
necessitates considerable communication sophistication between the "host" and
peripheral devices and when errors occur, through either faulty interlocks on moving
elements within the FMS, or data corruption between the respective computers, then
quick and easy "error-recovery" is the key to maintain optimum plant operation. It
has already been alluded to previously that FMS "condition monitoring" sophistica-
tion is a critical element in the successful implementation of any FMC/S, however,
more will be said on this topic later in the chapter.
In the following section the theme of system communications will be briefly touched
upon, looking into the various "network topologies" and MAPITOP techniques
currently used, whilst attempting to identify the research direction that manufacturing
systems "networks" are developing towards, in order that the reader might readily
appreciate the levels of sophistication of present and future computer communication.
As we have seen in the previous section and more specifically in the case of the large-
scale FMS depicted in Fig. 2.8, significant amounts of data transfer occur with such
equipment having a considerable level of machine intelligence in order to perform the
expected control functions necessary in such manufacturing environments. In recent
years an almost limitless number of proprietary local area networks (LANs) have come
to exist, or have been proposed, as some vendors have attempted to control standards
in order to dominate their market positions. This has lead to a lack of industry
standards and it is now clear that no single vendor can supply all of the communica-
tion needs desirable in an automated factory. Any vendor attempting to install trans-
lator boxes between peripheral devices within the FMS, to obtain successful com-
munications, should be vigorously resisted by the customer, whilst it is also prudent
to avoid single source suppliers of communication equipment. Furthermore, the
systems limitations of the proprietary networks need to be stringently evaluated by
the prospective client. Where standards do exist, they do not make the task of the
engineer easy, as important decisions about modulation, access, media, topology,
together with many other technical communication considerations must be made
when producing a functional specification for an FMc/S. Let us consider these four
primary independent variables in a little more detail:
Modulation
(i) baseband: typified by the telephone network
(ii) broadband: a typical cable TV installation
Access
(i) contention
(ii) token passing
www.EngineeringBooksPdf.com
Flexible Manufacturing Cells and Systems, Leading to Complete Computer Integrated Manufacture 89
www.EngineeringBooksPdf.com
90 CNC Machining Technology
b
a
c
d
Fig. 2.9. Typical arrangements of network topologies and their different characteristics.
www.EngineeringBooksPdf.com
Flexible Manufacturing Cells and Systems, Leading to Complete Computer Integrated Manufacture 91
ware devices connected to a "bus" LAN, for a CAD/CAM link via a DNC link to be
successful, a range of software is required. Here we can see that a vast array of
software functions is required and these FMS technology orientated functions might
consist of:
production planning administration
master data administration
system configuration (system parameters)
tools (nominal data)
workpiece carriers
control data administration
CNC part programs
workplans
production orders
status data administration
system status (plant status)
tools (actual measured data)
workpiece carriers (pallets)
workpieces
connection to tape punch reader - if necessary
alarm/error messages
synchronisation
message handling and print functions
setup and clamping calculations - for tool "balance"
automatic material flow control
including connection to a transport system
machine tool programs
for serial link
for LAN
automatic tool flow control
single part (workholding)
pallet-based transport systems
tool setting machine connection
speCial machine connections
wash machines
coordinate measuring machines, etc.
short term shutdown
shift reports
CIM interface
In order to achieve secure data transfer and compatibility between a range of soft-
ware protocols, it is highly desirable to use MAPITOP communications philosophies
and this will be considered in the following section.
www.EngineeringBooksPdf.com
92 CNe Machining Technology
and machining centres - to workpiece transportation systems and other devices in the
communication world of manufacturing, known euphemistically as FMClS, has a
technical flaw - it has, until recently, been almost non-existent between different
vendors' products. This, however, has not been true when a "tum-key" system has
been purchased from a single vendor source, which has meant that most successful
automation systems were commissioned from the larger machine tool companies. The
problem here is one of secure data transmission (communication) between different
vendors' products, such as a turning centre made by one company and a robot by
another. This problem of the successful two-way transfer of data between devices
associated together in an FMClS has been addressed by the Manufacturing Auto-
mationffechnical and Office Protocols, known more commonly as MAPffOP, which
have, in their various versions, been to a greater or lesser extent a success.
Prior to a discussion on the methods by which data communication is presently
achieved between automated equipment, it is appropriate to consider the historical
background in the development of MAPffOP. The automotive industry was one of
the leaders in adopting automation into manufacturing plants in order to improve
their competitiveness, which meant that they were one of the first to experience the
problems associated with the lack of multivendor communications. It is generally
agreed that General Motors, and to a lesser extent Boeing, in the USA were the
instigators behind these communications developments. In 1980, General Motors, the
largest company in the World at that time, set up a study group after the company
turned in a loss of $780000000, its first for sixty years. Their findings indicated that
around 40% of the total automation investment in the plant at their factories was
being consumed in communication costs. This meant that the company had to come
to terms with this drain on capital resources and they declared their intention to press
ahead with the establishment of their own rules for communications and insisting that
once the rules were established, they would become mandatory for all suppliers of
equipment to General Motors. Thus, the General Motors MAP Task Force was estab-
lished and it was their original intention to take the best solutions of the existing
standards from around the World and incorporate them into a new protocol. Unfor-
tunately, they shortly established that the standards organisations had not considered
the complex communications requirements for manufacturing, so General Motors had
to use existing standards whenever possible and supplement them with its own
where applicable.
Possibly the first practical MAP demonstration for the public occurred at the July
1984 "National Computer Conference" in Las Vegas, when General Motors, along
with seven suppliers, demonstrated four of the seven layers in operation - more will
be said on these layers shortly. In November the following year, at the Detroit
"Autofact 85" exhibition, there was a more ambitious display by General Motors
and other vendors. On this occasion, twenty-one other companies were present,
including: AT & T, Digital Equipment Corporation, ICL, Motorola, Gould & Allen
Bradley, together displaying a MAP network with six layers in operation reaching the
2.1 specification. The American lead was being followed in Europe, and in March
1985, the European MAP Users Group was formed, along with ESPRIT initiatives on
similar lines. With the MAP specification being 2.1, a very impressive "CIMAP"
show sponsored by the Department of Trade and Industry was held at the NEC in
Birmingham, with about seventy companies taking part. The dynamic demonstrations
of MAPffOP were on show to a privileged audience of engineers and the biggest hall
was filled with a single network. Since then, a further refinement of the standard has
led to MAP 3.0, which was previewed for the first time at the "Enterprise Network
Event" in Baltimore, USA, in 1988. Around this time, much disquiet was heard
www.EngineeringBooksPdf.com
Flexible Manufacturing Cells and Systems, Leading to Complete Computer Integrated Manufacture 93
Table 2.2.
User programs Application programs (not part of the model) Server machines
Layer 7
Application Manages lower-layer services including application programs Application
Layer 6
Presentation Restructures data to/from the standardised format used within the Presentation
network
Layer 5
Session Name/address translations, access security and synchronises and Session
manages data
Layer 4
Transport Provides transparent reliable data transfer from end device to end Transport
device
Layer 3
Network Establishes connections between equipment on the network Network
Layer 2
Data link Establishes, maintains and releases data links Data link
Layer 1
..
Physical Encodes and physically transfers messages between adjacent devices
(Physical link)
Physical
amongst the MAP vendors, relating to the frequent modifications to the standard and
as a result MAP 3.0 was frozen for a period of six years, enabling some consolidation
to occur.
So far, the reader has been introduced to the Open Systems Interconnection (051)
seven-layer model adopted by MAP, but little detail has been given. Let us look a little
deeper at these seven layers (Table 2.2), each handling different aspects of inter-
computer communications.
If we consider each layer's application in turn, then at the bottom of the model one
has:
1. Physical. This specifies the actual cable connecting one computer, or machine tool,
to another and the type of signal that will pass over it - with General Motors
specifying broadband. As we have discussed in section 2.3.3, broadband looks like
a conventional co-axial aerial cable used in conjunction with television, being
approximately 2 cm in diameter. Signals passed over it are analogue, modulated like
radio waves to carry the digital information. The name broadband is derived from
the fact that it is possible to transmit many different signals at a range of frequencies
through the cable without interference.
2. Data link. This defines how messages are passed over the network, with each
message entering the network being a package of information termed a "data-
frame". This together with a specifying address is necessary to send it to the correct
computer on the network. The problem here is in deciding when any particular
"node" - this is a computer, or machine connected to the network - can transmit its
message.
Two common systems in use are "collision detection" or "token passing", with
General Motors choosing the latter as being the more suitable for MAP. As its name
implies, in "token passing" a "token" is passed from one "node" to the next. Only
the "node" that holds the "token" may transmit messages and each can only hold it
for a fixed period, before passing it onward.
www.EngineeringBooksPdf.com
94 CNC Machining Technology
3. Network. This decides the format of messages on the network and for this General
Motors chose an existing standard termed "connectionless networking". In essence,
this means that each message is self-contained, carrying its own address. By using
this system, there is no need for one computer to form a fixed link with another to
pass the message.
4. Transport. This contains the part of the protocol ensuring data integrity and unlike
lower layers, a "node" establishes a notional connection with similar nodes at this
level. When a message is sent, the transport layer at the transmitting "node" looks
for an acknowledgement from its respective receiving "node". However, if it does
not receive one, then it retransmits its message.
5. Session. This is a complete conversation between two "nodes", or computers and
during this activity data may be exchanged between different programs running on
each. As an illustration of this conversation, a host computer might be communi-
cating with a programmable logic controller (PLC) in the plant. The communications
link might be that the host is used to control production, but simultaneously it may
be down-loading files, from the host, to the PLe, whilst receiving data from the
PLC which may be used to maintain a record on the whole plant's database, held on
the host computer.
6. Presentation. This handles the language each computer speaks. One computer
might use a particular binary number to, say, represent the letter Z, whilst another
binary number uses a different numerical value. Therefore, in order for them to
be able to communicate with each other, they must both utilise the same data
representation. Thus, the "node" that initiates the exchange of data will firstly ask
if the recipient "node" uses its favoured representation. If the answer to this
request is "no", then it tries a different approach until they obtain a common
language understood by both.
7. Application. These are the programs that run on a computer and it is such programs
that communicate with one another - the MAP objective being to enable them to
exchange data. When General Motors initially attempted to instigate MAP, it had
to develop its own protocols here as there was no International Standard, or group,
to help them draw up such protocols. For example, in MAP 2.1 it included the
following:
"Manufacturing Message Format Standard" (MMFS), pronounced Memphis, which
is a language allowing machine tools, that do not have sophisticated memory
devices, to talk to one another
"Common Application Service Elements" (CASE) which is used to set up com-
munications with a remote "node"
"Transfer, Access and Management" (FTAM) which was a protocol developed by
Boeing for file transfer between "nodes" with devices such as disk drives
When MAP 3.0 was launched, all three protocols were replaced by the "Manu-
facturing Message Specification" (MMS). The logic behind the central concept of
MMS, is the "Virtual Manufacturing Device" or VMD. With this protocol, every
computer, or machine tool looks the same to the network through the MMS and
it actually looks like the VMD. Thus, all the actual functions of the "node" are
"mapped" onto the VMD.
This completes our summation of the seven MAP layers and their respective func-
tions, but before we go on to consider Technical and Office Protocols (TOP) and their
relationship with MAP in an FMc/S, it is worth briefly mentioning how MAP has
been adopted by the manufacturing community so far. Across a range of motor
www.EngineeringBooksPdf.com
Flexible Manufacturing Cells and Systems, Leading to Complete Computer Integrated Manufacture 95
manufacturers, such as: Jaguar, BMW, Renault, Mercedes, etc., MAP networks exist,
although it is perhaps not the complete solution, as lower grade network topologies
might be more applicable to some manufacturers such as "MINI-MAP". The MAP
standard is now in the public domain and its development is controlled through MAP
user groups - the largest being in the USA. There is a growing influence in Europe,
principally via the European MAP User Group (EMUG) and others being developed
both in Japan and Russia. Such user groups will determine the changes that will be
made in the future to MAP 3.0. However, the growth of MAP is not solely in the auto-
mative industries, as automation companies, electronics firms, together with other in-
terested concerns are also adopting the MAP philosophy of communications protocols.
In general, the requirements which distinguish a CIM network from other applications
can be loosely classified into three areas:
efficiency and flexibility of real-time multi-process communications
accommodation of equipment and environment heterogeneity
distributed network management and control
Let us consider each in turn in a little rriore detail, gaining a clearer picture of the
technological problems to be addressed.
www.EngineeringBooksPdf.com
96 CNe Machining Technology
www.EngineeringBooksPdf.com
Flexible Manufacturing Cells and Systems, Leading to Complete Computer Integrated Manufacture 97
An unscheduled failure just for a stand-alone CNC machine tool can cause a loss
of productivity averaging 11 %. This problem is exacerbated as machines become
integrated into an FMc/S; under such complex inter-relationships production losses
can be up to 40%. When the theme of FMS was first introduced, extravagant claims
were made for such systems and it is hardly surprising that experiences of failure
bring them into disrepute, which may be the principal cause for the lack of instal-
lations in industry and discouragement of investment in these technologies. If in-
dustry is going to invest in integrated manufacturing systems across a wide area of
application, then reliability and uptime must be improved. Let us now look at an
advanced project associated with this topic, at present underway, by means of a case
study to give the reader an appreciation of the general theme of machine monitoring.
In fact, a European "Esprit" project (504) has been running since the mid-1980s
under the title "Development of fault tolerance in the control and management of a
production system", with six companies involved. The multi-national companies
include: AMTRI (Stewart Hughes Ltd) in the UK, Adersa (the French process control
group), GRS (nuclear engineering specialists), the Technical High School in Darmstadt,
Batelle Institute in Frankfurt and Ikerlan (the Spanish machine tool research centre).
In December 1988 the £3.5 m "phase one" project was completed and this was
followed by a more ambitious project (2349), with a budget of £7 m which is due for
completion in 1992. Its "phase two" objectives were to build upon the hardware/
www.EngineeringBooksPdf.com
98 CNC Machining Technology
FTC conceptually means a system that is designed to tolerate faults and operates
whilst these faults are being rectified. Such a system copes with abnormal conditions,
by maintaining control whilst a recovery, or a shut-down program is implemented. FTC
is related to adaptive control, depending upon a "bottom-up" application of advanced
diagnostic monitoring to: machine tools, production processes and products. The
speed at which the system collects/analyses the data required to maintain real-time
control ranges from milliseconds, such as the case of tool breakages/collisions, to
perhaps several days, when wear is detected in a machine tool gearbox.
This project's objective was to develop machine tools and methods necessary to
build an FTC system suitable for use in a manufacturing plant, ranging from simply a
stand-alone machine to a complex FMS facility. In order to achieve this level of
control, it necessitated sophisticated data acquisition, analysis hardware and control-
ling software, in conjunction with sensors to support real-time process monitoring
and in-process quality control.
First, a stand-alone experimental machine was used to determine the principles of
fault diagnosis and computer "modelling" - highlighting the need to develop a fast,
modular, multi-tasking computer for acquisition and analysis of real-time data and its
synchronisation with the machine's operations. One of the major lessons learned
from this stand-alone machine tool demonstrator, was the benefit to be gained from
positioning sensors at the "heart" of the machine - hence the advantages gained from
placing electrical transducer sensors at the hydrostatic oil spindle - providing direct
tactile sensing signals. Secondly, a more ambitious demonstration was developed by
Ikerlan in Spain - providing access to an existing FMC, comprised of a turning centre,
machining centre, six-axis robot for loading/unloading tools and parts to the lathe,
with an AGV providing palletised workpieces to the machining centre.
Initially, the principal task was a technical audit to define how the cell operated,
establishing what sensors already existed, the failure modes in operation, communi-
cation used and how the cell was controlled. The FMC was activated upon the arrival
of a workpiece blank, this being identified by a vision system which triggered the
www.EngineeringBooksPdf.com
Flexible Manufacturing Cells and Systems, Leading to Complete Computer Integrated Manufacture 99
selection of programs, tools, robot grippers and other functions associated with this
part's manufacture. The "host" computer had a database restricted to tool informa-
tion, machine status, tool and billet positions, with very little in the way of fault
recognition - this being confined to readily serviced items: blocked filters, malfunc-
tioning switches, etc. In response to any error, the "host" simply shuts the machine
down and in so doing severely limits the functional operation of the cell. Therefore a
Data Acquisition and Analysis System (DAAS) computer was situated at each machine
and interfaced with its controller and through the network to the "host". Software for
interpreting fault conditions and planning the actions to correct them had to consider
the viability of the machine tool's operating routine. Data needed to be collected only
at the appropriate times relative to the machining program. As an example, vibration
data collection was not taken during a heavy roughing cut, but under more steady-
state machining conditions. This meant developing a new operating environment,
which linked the software of the DAAS computer to the machine's operating pro-
grams - it is known that "synchronisation" is the key to success in diagnostic moni-
toring. This may be achieved by linking the DAAS computer to either the CNCs or
PLCs, so that one can determine the context in which the machine is operating. Thus,
it could be stopped, run, begin cutting, or activate a probing cycle, or similar, so that
once we know the context of the machine's status, we can incorporate relevant
monitoring. If, say, the spindle was running but not in cut then it might be more
appropriate to monitor the spindle vibration data.
The DAAS computer runs a "mimic" of the part program in parallel with the actual
programmed machining cycle and in this manner, keeps in step ensuring the correct
acquisition and analysis of data. This technique permits a very fast reaction to data,
indicating when a serious fault condition arises, such as that which is likely to cause
tool/workpiece damage. At the machine level, the DAAS software generates indicators
of the machine tool's health. Such indicators are interpreted using a ROM-based fast
interpreter, taking the form of a simple "logic tree". Using "expert systems" at this
level of monitoring/control, was considered appropriate for reasons of size and speed.
The "logic trees" are defined by the manufacturing engineer and represent the logic
progression from symptoms to identified error states and their associated actions,
such as an unscheduled tool change, or operator intervention initiated by the DAAS
through the controller link. Other indicators of the cell's status come from the "host"
and for this higher level of interpretation an expert system is essential.
This cell's role as a demonstrator of condition monitoring is made operational by
means of a simulated material requirements planning (MRP) work plant, with the FTC
system integrated into the cell. In summary, this sophisticated FMC will always
attempt to fulfil its production task, regardless of conditions. If faults develop, or are
introduced, the cell will always attempt recovery by initiating action automatically,
where they are within the scope of the control. When this is not possible, it will pass
actions on in message form for defined manual intervention. Where recovery is not
pOSSible, the cell shuts down under control until such time as the fault is logged as
being cleared and at such a time, it will initiate restart automatically and attempt to
return to a normal schedule to achieve its original production goal. Where such a goal
is no longer achievable, then it generates its "best target", making this information
available to the MRP planner. During cell operation, the "host" maintains a graphical
mimic of the status and prognosis based on the continuous interrogation of the
database - manual intervention is also prompted from the "host" terminal.
Such condition monitoring sophistication is imperative in cells/systems, if a com-
pany is to benefit from high productivity, through the minimum of down-time due to
error - recovery and maintenance scheduled/unscheduled within the plant. Efficient
www.EngineeringBooksPdf.com
100 CNC Machining Technology
utilisation is the key element in a truly productive high capital cost plant, so that a
company remains competitive, economic and flexible in their manufacturing demands
against intense competition from rival manufacturers.
In the following section, we will consider just some of the monitoring systems
necessary in order to obtain high quality parts and minimal scrappage, during un-
tended or minimally manned production.
As one might expect when machine tools are utilised in the "stand-alone" condition,
this invariably infers that an operator is present, whose prime task is to monitor
the functions concerned with satisfactory part manufacture. In a typical production
situation, the operator will be concerned that the tooling is performed satisfactorily, so
will monitor the tools for:
identification
offset measurements
life
breakage detection
In a similar fashion, the operator will monitor/identify workpieces:
identifying the next part to be machined
set up fixturing and arrange clamping for the component
accurately locate the workpiece holding device on the maching tool
position the part in the correct relationship to the part program, by manually adjust-
ing the workpiece, or program, accordingly - unless computerised workholding
techniques are in use (see section 3.9, Volume II).
Still other features require the operator's attention, including:
monitoring of the machine tool's cutting efficiency by sight and sound
part program adjustments, as the machine's operating temperature changes, e.g. from
cold to its normal operating temperature
speed and feed adjustments, to optimise the best cutting conditions during the
running of the part program
In an FMC/S environment, this implies that the plant is unmanned or, at worst,
minimally manned machining occurs. The operator's absence for lengthy periods of
time creates a considerable number of manufacturing problems that must be con-
quered if the machining system is to perform its production functions satisfactorily.
These problems occur when attempting to monitor and service the operations nor-
mally associated with an experienced operator. Such tasks include monitoring the
cutting tool's performance and condition, together with the other human-related
www.EngineeringBooksPdf.com
Flexible Manufacturing Cells and Systems, Leading to Complete Computer Integrated Manufacture 101
Fig. 2.10. The monitoring systems desirable for successful untended machining in the FMS environment.
tasks. Hence, in the unmanned condition normally associated with FMS plant, the
monitoring system provides a degree of artificial intelligence (AI), necessary to mimic
operator experience and to a lesser degree, provides instinctive reactions to changes in
the plant running normally associated with human involvement.
A considerable array of monitoring systems is necessary to compensate for the lack
of human presence on an FMClS (see Fig. 2.10). In broad terms, they can be classified
under three headings - with obvious sub-divisions as shown:
workpiece monitoring
machine tool monitoring
tool condition monitoring
Let us now look at each of these essential monitoring systems found in untended
environments in a little more detail.
www.EngineeringBooksPdf.com
102 CNC Machining Technology
Workpiece Monitoring
In chapter 3, Volume II a review of workholding techniques was given and here we
are primarily concerned with the automatic monitoring of the plant with respect to an
FMc/S, although it is quite feasible to use such systems on minimally manned stand-
alone machine tools. Essentially, workpiece monitoring is concerned with:
workpiece identification
automatic workpiece set-ups
workpiece gauging
The first requirement prior to machining the parts is to select them from the random
mixture as they are either held on pallet stands/pools, or supplied via some other
delivery system. With the variety of existing methods available for delivering the parts
to the machine, the workpiece monitoring system must cope in an effective manner,
such as radio transponders, bar coding, binary pins, etc., for say, machining centre
palletised systems. Such indirect workpiece recognition - where the pallet is coded
and it is assumed that the correct part/s will be held on this pallet's fixture - uniquely
identifies it and calls up the desired part program in the CNC. Having identified the
part and its associated part program, the component's orientation needs to be con-
firmed and this is established by the workpiece/holding monitoring system in the
desired relationship and position to this part program. Whilst the machining oper-
ation is in progress there are several techniques available to assess part quality (see
section 1.8.2, Volume II).
in-process gauging - where information is gathered during the actual machining
process - this is difficult to achieve in reality, owing to the practical problems of
real-time measurement and control, so offers little potential, but in theory would
seem an "ideal" technique
in-cycle gauging - commonly associated with turning and machining centres whether
in "stand-alone" or cell form - using the popular touch-trigger probing techniques
not only to assess the part quality between operations, but prior to this, to inter-
rogate the fixture for accurate part alignment
near-machine post-process gauging - this technique has found particular favour on
turning centre applications, where a receiver gauge is pOSitioned adjacent to the
machine tool and a part is automatically loaded and the established feed-back loop
to the machine up-dates/corrects as the critical features being assessed change
owing to either tool wear, thermal drift, or both. Such gauging equipment might be
either contact (LVDT transducers) or non-contact (laserllight path systems), sampling
at, say, 10% intervals to 100% inspection
off-machine gauging - using Coordinate Measuring Machines (CMM) coupled to a
Statistical Process Control (SPC) package - allows a diverse range of parts to be
inspected; alternatively, if short runs are the requirement, then greater flexibility
can be accommodated, but at the expense of considerably slower part processing
times
Yet another method (strictly speaking outside this discussion on untended moni-
toring, yet worthy of a mention) is the technique known as "deterministic metrology".
This controversial method predicts and corrects for part errors based upon attempting
to anticipate any machining errors in real-time and subsequently corrects them. This
philosophy assumes that we will always try to cut a good part and as such, eliminates
the need for further inspection. Thus a detailed mathematical model is developed
www.EngineeringBooksPdf.com
Flexible Manufacturing Cells and Systems, Leading to Complete Computer Integrated Manufacture 103
If we ignore the diagnostic sensing devices used in determining the machine's health
(previously alluded to in section 2.4) and concentrate on the protection that can be
offered to the machine tool as a result of either variations occurring whilst cutting,
temperature and protecting against collisions, then three monitoring devices seem
necessary:
adaptive control } .
' . .. both having been described in section 1.8.1, Volume II
co111SlOn momtormg
thermal drift compensation
If we ignore both adaptive control and 'collision monitoring systems here as they have
been dealt with adequately elsewhere (see section 1.8.1, Volume II) - and concentrate
on the latter system of thermal drift compensation, we will gain an appreciation of
some of the problems associated with the influence of ambient temperature changes,
the variations caused by the machine tool's structural modifications promoted by dif-
ferential temperature effects and how they influence the part quality.
Whenever a machine tool is used as part of an FMC/S, or in "stand-alone" mode,
and subjected to variable conditions of usage at or near its process capability (i.e. "for
stable manufacturing process, it is the capacity to reach a certain level of quality" e.g.
Cp < 1.33) which frequently is the case of late in precision engineering companies,
then an uncompensated machine tool is likely to produce some scrap components.
Simply, the rise in ambient temperature in the shop plays a significant role in causing
the machine's structural elements to move. It has often been the case that the author
has visited a company during the heat of the summer and found the ambient room
temperature in excess of 30°C around midday, with this problem being compounded
by the fact that direct sunlight is present, further exacerbating the local temperature
on the machine tool. In many manufacturing companies with such fluctuating tem-
perature conditions, it seems impossible to maintain a consistent part dimensional
quality. Even when the temperature within the workshop is stable and an air-condi-
tioned environment exists, irregular usage of the plant causes differential temperature
effects to influence the machine's structure and induce part variations at high relative
precision indexes (i.e. Cp < 1.33). What often makes matters worse is that the
machine tool's calibration - using laser interferometers, or similar methods, probably
either occurred some months ago at best, or was undertaken when the machine was
cold. Recently, a ball-bar system has become available to obtain a quick check for both
turning and machining centres and to a lesser degree, CMMs within the precision
manufacturing facility, allowing for speedy and efficient daily re-calibration of a range
of geometric and linear features within the volumetric envelope of the machine tool.
Returning to the theme of differential temperature effects produced by irregular
usage, typically a turning centre headstock can grow owing to a temperature increase
in the bearings/motors by 20°C. This problem can be minimised by the machine tool
builder, with careful design of the structure and incorporating "heat sinks" at "hot
spots", controlling thermal growth uniformly at the centreline and away from the
spindle nose. However, a more significant thermal problem arises in the differential
growth in the ballscrews - often of less temperature magnitude (4°C) but this affects
the positioning accuracy of the machine - particularly for indirect feedback closed-loop
www.EngineeringBooksPdf.com
104 CNC Machining Technology
monitoring systems (i.e. with rotary encoder/motor designs). On the "C-type" frame
typically found on vertical machining centres, the problem of thermal growth on the
larger column machines can cause dimensional variations, and thermal sensors are
often positioned in the bed, throat (column) and head of the machine tool. In order to
obtain a degree of uniformity in controlling the thermal growth, the machine is run in
hot/cold and intermittent conditions and plotted values are obtained for each thermal
sensor, with software controlling and compensating the machine tool continuously in
the X, Y and Z axes. Therefore by the judicious use of thermal sensors positioned at
strategic points around the machine's structure, coupled to customised compensation
software, it is possible to minimise the effects of thermal growth.
identification
life monitOring
l
In Volume II we will review the range of monitoring systems used for tool:
Regardless of the machine tool that is used for the manufacture of a component, the
most important criterion is "will it repeatedly produce a part of satisfactory quality?".
www.EngineeringBooksPdf.com
~ TOOL:- PERIPHERALS:-
IMACHINE PALLET/CHUCK
oHeat generated by machining (chips).
oPallet drivel C-axis (i.e. positioning),
OCoolant temperature control.
oAccuracy,
oAmbient effects (radiation. convection).
oMachining task (cut ting forces, .... l. oPallet Ichuck location.
WORKSPINDLE TOOLING
oType of bearings,
oThermal effects caused by energy loss, o Tool dimensions,
o Concentricity, o Tool presetting (accuracy),
THE fEATURES 01001 register in various locations.
o Tool registers (i.e. location l.
AffEC TING
WORKPIECE QUALITY
.l!:!. .A.
www.EngineeringBooksPdf.com
ONo drunkness error, o Location on pallet/chuck.
o Positioning accuracy. oAccuracy.
>-'
Fig. 2.11. The part quality produced by an FMS depends on the machine tools and peripherals. [Courtesy of Scharmann Machine Ltd.] o
U1
106 CNC Machining Technology
There are a number of closely allied factors that influence our ability to manufacture
parts, most of which are depicted in Fig. 2.11, in this instance for a machining centre.
If we consider the two basic hardware groups, they can be further subdivided as
follows:
machine tool:
machine
work spindle
linear axes
table
peripherals:
pallet/chuck
tooling
measuring probes (touch-trigger)
clamping of workpiece
Let us now briefly review each of the above in tum beginning with the "machine".
Machine Tool
Machine. On a machining centre, or for that matter any machine tool where large stock
removal rates are currently being undertaken, the volume of hot swarf generated must
be quickly and efficiently removed from the working envelope and flushed into the
swarf conveyor. If swarf is allowed to build up in the cutting vicinity then the hot
tempered chips will cause a degree of thermal growth to the machine's structure,
locally modifying and distorting the structure, which in tum affects the dimensional
characteristics of the part. The same can also be said about coolant temperature
control and on many of the larger installations, oil coolers and greater volumes of
coolant are used to minimise the heat induced into the coolant during cutting. If this
were not the case, then warm coolant during a machining operation might have a
significant effect on expansion of the workpiece during its manufacture. As we have
seen in section 2.5.1, the ambient room temperature and its fluctuation during the
working day can playa role in influencing dimensional characteristics of the part. Yet
another influential feature - but this time not a temperature induced one - is how the
cutting forces generated can either distort the part, cutter, or both, during machining
at high accuracy, particularly where workpiece/cutter rigidity is suspect.
www.EngineeringBooksPdf.com
Flexible Manufacturing Cells and Systems, Leading to Complete Computer Integrated Manufacture 107
Linear Axis. As with any metrological equipment, machine tools are designed around
kinematic motions of translation/rotation, but with extra emphasis upon restraint and
location of the moving elements - slideways. The geometric accuracies of one axis
with respect to another are crucial when designing a machine tool, as they have a
direct effect on the subsequent part quality. A number of geometric features need to
be considered by the "builder" - not least of which is the positioning and rigidity of
the ways. As moving elements must respond to the motor drive commands issued by
the CNC part program during the manufacture of the part, then low-friction rigid and
well-spaced ways ensure the smooth transmission of motion. Such geometric features
that the construction must account for are:
squareness of the axes with respect to one another
straightness of ways
parallelism of way guides
flatness
other geometric influences: "yaw, pitch and roll" tend to be, in the main, concerned
with the moving element upon these ways, as does "backlash" in the ballscrew
assembly
Peripherals
Pallet/Chuck. On a vertical machining centre, in particular, when the rotary table for
pallets is incorporated the C-axis positioning accuracy will influence the prismatic
angularity of the part features. Often a Hirth-coupling is used for location and posi-
tional accuracy is achieved through a rotary encoder. Pallet accuracy of the location on
the table and working surface must be of a high order, so that when auxiliary
www.EngineeringBooksPdf.com
108 CNC Machining Technology
workholding equipment is added - chu'ck, cube, tombstone - the extra height does
not induce an accumulated angular or squareness error in situ.
Tooling. As we will see in Volume II, tooling can be classified under three headings:
"qualified", "semi-qualified" and "unqualified". With "qualified" tooling we know
all about its pertinent dimensions: length and diameter in the case of a new slott
endmill, whereas in "semi-qualified" tooling, we would simply know the drill's
diameter with any surety. It follows that "unqualified" tooling is unique and as such,
no true dimensional data is known. The point should also be made that at very high
accuracy even new "qualified" tooling is made to certain high limits of precision and
some companies (e.g. aerospace/optical) regrind their cutters to higher accuracy as a
matter of course. Tool presetting plays a vital role in accurately building and setting
up tool kits and on milling cutters, if each insert's setting in their respective location
pockets is not achieved, then this can influence both the cutting behaviour and the
subsequent dimensional characteristics of the workpiece.
Clamping of Workpiece. As we will see in Fig. 3.2, Volume II for workholding on turning
centres and again, in Fig. 3.16, Volume II for machining centre workholding, the
higher accuracy parts occur when using dedicated chucks, or fixtures. The major
reason for this is their inherently higher accuracy of manufacture coupled with greater
rigidity, which means that workpieces can be located in the required position more
accurately and less flexure of the fixturing occurs - at the expense, of course, of more
flexibility in accommodating differing part geometries.
As we can appreciate, there are a considerable number of mitigating errors that
concern us when manufacturing parts either in a "stand-alone" or "system" mode.
Each in itself is not too great a problem, but the significance magnifies as one
approaches the process capability of the plant, where a compounding effect can
present real problems during the part's manufacture.
www.EngineeringBooksPdf.com
Flexible Manufacturing Cells and Systems, Leading to Complete Computer Integrated Manufacture 109
an integrated and flexible metrology facility on line to assess the occasional pre-
planned part as deemed necessary by the host computer. Such a flexible metrological
facility is a coordinate measuring machine (CMM). However, problems can arise
when one tries to deliver this part to be measured straight after the completion of
machining. The major problem is residual swarf and coolant adhering to the intricate
and inaccessible features, or within the component. So, this usually means that an
intermediate cleaning process is necessary, prior to inspection. Obviously, one would
not want to manually clean each and every component destined to be inspected, as
this would be labour intensive and boring, and not cost effective. Therefore, it is usual
to include an automated cleaning facility within the system.
A typical washing station has an AGV loaded double pallet "paddle wheel" clean-
ing facility controlled through a DNC link to the "host" computer and it is pOSSible to
run a range of washing strategies - with any changes in these strategies being effected
via a terminal in, for example, the control room. A number of washing/drying stra-
tegies can be utilised, such as:
number of paddle wheel stopping positions
paddle wheel position - angle unit
dwell in washing position - seconds
dripping time - seconds
washing time - seconds
blowing time - seconds
As an alternative, a six-axis robot equipped with high-pressure wash/degrease
facilities - suitably protected and fully guarded - has proved well up to the task of
cleaning components automatically, albeit an expensive but highly flexible solution to
the problem.
Once the part has been thoroughly washed and dried, it is in an acceptable state to
be loaded onto a CMM for automatic inspection.
www.EngineeringBooksPdf.com
lID CNC Machining Technology
Fig. 2.12. One of the most modern factories in Europe, in Worcester, England. A fully integrated CIM
facility, producing 100 machines/month by 240 staff on 14.5 acres. [Courtesy of Yamazaki Mazak Ltd.)
It is arguable that the Yamazaki Mazak factory at Worcester, England is the most
advanced in Europe. The factory began production in mid-1987 and is based upon
Flexible Manufacturing Systems concepts of which it had previous knowledge from
several sites outside of Japan, although the original site at Oguchi in Japan was
developed some years previously. The UK was chosen because of its English-speaking
advantage and the idea of building the factory at the birthplace of the industrial
revolution appealed to Mr Teruyki Yamazaki - son of the founder. A green-field site
was chosen for the factory (Fig. 2.12) on a 14.5 acre site, with an initial building area of
16500 square metres. The whole complex was designed to be controlled as a highly
advanced CIM system, that is, complete production control ensuring that manufacture
is achieved in an optimum time, with minimum inventory. When the site was initially
commissioned in 1986, it cost £35m to build and it was designed to manufacture a
range of turning and machining centres - with their own machine tools used to
manufacture them. The complete factory has been laid out as a giant shop window, so
www.EngineeringBooksPdf.com
Flexible Manufacturing Cells and Systems, Leading to Complete Computer Integrated Manufacture 111
that visitors (around 3000 per year) can see how the machine tools function within the
factory and how the parts are made, tested and assembled.
The plant runs an MRP II system called "Magnet", originally written in Cobol for
use in Japan, but heavily modified for the UK factory. The system operates at three
distinct levels - using a different computer at each level - for scheduling, process
control and specific machine control. An IBM mainframe computer processes any
orders entered by the sales department into a sequence of operations involving the
purchase of required components and the insertion of the individual order into the
master schedule. Twice per day information updates are received from the factory
floor and the computer is able to monitor the arrival of the required components and
initiate the machining process. It receives data on current progress, distributing in-
structions based upon product mix optimisation going through the plant via a PC
linked to three operational DEC Micro Vax computers - with each Micro Vax having a
separate area of responsibility. One is used primarily to control the automatic ware-
house, together with movements of four AGVs. A second channels instructions to
the three CNC automated machining lines, whilst the third is dediCftted to tool
management, creating life-cycle maintenance for each tool and scheduling automatic
replacements.
The machining activities run as a CIM system with automated delivery to the
various machine tool lines from banks of pallets, which have the ability to continue
working unmanned for the night shift in a "lights-out' situation. However, it is still
cost effective to have a degree of manual operation when painting and welding, and
for final assembly, owing to the relatively small volume of work undertaken during
such activities. The "host" computer informs the MicroVax responsible for the ma-
chining lines when work is to be processed on a particular line, with its respective
pallet being delivered to a specific machine according to the dictates of the master
schedule. Whilst this is being initiated, the part program is called-up and down-
loaded to this machine tool, the software being written in Fortran, ready for the
machining cycle to commence, once the previous part has been completed. As we
have seen in the previous chapter, the part program prescribes not only the cutting
sequences and effects the necessary tool changes, it also programs and monitors the
feed and speed requirements of the cutting tools to ensure a standard and repeatable
performance. It is worth pausing here to discuss the Japanese philosophy to manu-
facturing, alluded to earlier. They are not concerned with running cycle times at the
theoretical 100% efficiency, but more interested in obtaining a longer and more
predictable tool life, less stress on the machine tool, fixture and part, whilst enhancing
part quality by cutting at around 80% of the capacity. This differs from the manu-
facturing philosophies adopted by both European and American companies in general
and one might wonder how they can achieve such an efficient production through-
put? The answer is by exceptional attention to the organisational elements of plant
layout, work-in-progress, just-in-time/Kanban philosophies in practice, in a realistic
manufacturing environment - this is where the real savings are made. Furthermore,
the allocation of discrete functions to different computers working on various levels is
the key to a successful CIM implementation, with the old adage to "keep it simple".
Yet another advantage of utilising the CIM strategy using the FMS philosophy is
that machine tool building requirements are inherently cyclical in nature - often a high
attrition rate occurs where customers might collectively decide to cancel, or postpone
new capital goods purchases as recession pressures affect potential orders - allowing
the machine tool builder to minimise such unforeseen circumstances. Similarly, CIM
strategies can cater for demand peaks, which would otherwise create major problems
both in terms of delivery on time and maintaining quality. Thus, using the CIM
www.EngineeringBooksPdf.com
112 CNC Machining Technology
Fig. 2.13. The tool presetting area with on·line tool management/monitoring. [Courtesy of Yamazaki
Mazak Ltd.]
www.EngineeringBooksPdf.com
Flexible Manufacturing Cells and Systems, Leading to Complete Computer Integrated Manufacture 113
around the factory, but a large range of machines is always on display in the
showroom. Just adjacent to the showroom, is a large expansive coffee lounge and
informal meeting place, overlooking a traditional Japanese garden. Formal teaching
and conference facilities are also present in this vicinity, with specialist engineering
and sales staff in attendance at all times, to answer customer enquiries.
This gives the reader an overview of the facility at the Yamazaki Mazak, Worcester,
plant; let us now discuss the factory in more detail.
Tool Presetting and Management Facility, with Automatic Tool Distribution Highway
A strategically positioned tool presetting facility beside the overhead distribution
highway (Fig. 2.13) allows for tooling requirements to be administered via a MicroVax
which is on-line to the "host". It organises the entire range of tool management
activities including tool offsets, life and replenishment. When present tooling is re-
quired the setter has visual confirmation of the tool-build requirement (Fig. 2.13)
highlighting the parts necessary and the offsets to be present for the respective cutting
edge/so All tooling is thus "qualified" on the tool presetter and placed into a known
position in the "tool hive" pocket, ready for the overhead tool delivery robot to
replenish the respective machine tool on demand. When the unmanned night shift
arrives, a stock of previously stored preset tooling is buffered in their designated
pockets in the "tool hive". This caters for any "sister tooling" - duplicate tools at the
end of their tool life - to be replaced in the machine's tool magazine at the appropriate
time and in so doing, increasing the tooling capacity to almost infinite lengths,
ensuring that tooling is always available. At the end of the night's machining, when
the day shift arrives, a stock of worn tools is buffered in identifiable pockets in the
"tool hive" and they are broken down and rebuilt as required by the tool management
software requirements - in line with production demand.
Obviously, such a complex set of tasks as tool replenishment, distribution and
service, across the large tooling library necessary in the FMS lines, needs to be
identified by a suitable tool tracking technique. Therefore, each tool holder has an
embedded microchip capsule positioned in the end of the pull stud. This microchip
carries the information (see section 1.7, Volume II on "intelligent/tagged" tooling
concepts) allowing each tool to be identified and tracked around the system and con-
tinuously updating the tool life data whilst in-cut by the tool management computer.
www.EngineeringBooksPdf.com
114 CNC Machining Technology
Fig. 2.14. Preset tools are automatically distributed along the U-shaped overhead monorail termed a "tool
highway". [Courtesy of Yamazaki Mazak Ltd.)
When the preset life of a tool has been reached, or a new tooling library is needed
on one of the machine tools, the tool robot will pick up a replacement from the buffer
"tool hive" and transport it to the machine which will unload/load the old/new tool
respectively (see Fig. 2.14). This tool highway straddles over both the small and large
prismatic lines and is a U-shaped monorail, connected to the tool presetting facility by
the adjacent "tool hive". When preset tools are required they are identified by the tool
management software on the CPU for selection and delivery via the distribution
www.EngineeringBooksPdf.com
Flexible Manufacturing Cells and Systems, Leading to Complete Computer Integrated Manufacture 115
highway. The highway distributes the tooling demands to the respective machine
tools using a random access order and in so doing, optimises its travel along both the
highway arms to the respective machining lines. Speed of delivery is not an essential
requirement here, as efficient utilisation of resources is all that is needed.
If all one had to do was load/unload preset "qualified" tooling into the machine tools
in their respective FMS lines, then the demands on the micro-computer would be
quite small. However, not only must the cutting tools be tracked, assembledlbroken
down and cutting data determination managed as part of the overall tool management
function, but the workpieces require similar attention. This is necessary to ensure that
at all times codified pallets can be similarly built up and buffered onto pallet stands,
awaiting either return to the pallet assembly area after machining, stored for further
machining, or simply awaiting delivery to a machine tool. In Fig. 2.15, we can see an
operator accessing information about a pallet build assembly. The isometric assembly
mimic present on the screen, informs the operator not only how to assemble the
workpiece on the pallet in this visual display, but identifies all the equipment nec-
essary to assemble the fixture and which part should be used, whilst simultaneously
noting/storing the pallet's code in the computer.
This workpiece palletisation is undertaken for both the large and small prismatic
lines and in an adjacent area an automated palletised facility was built, for some
unmanned pallet assembly operations. However, this is still at the proto-type stage of
development and may/may not be brought on-line, depending upon the production
pressure in the future and it is expected that up to 30% of components could be
fixtured in such a manner.
www.EngineeringBooksPdf.com
116 CNC Machining Technology
Fig. 2.15. Fixtures are scheduled by the host computer and all of its assembly details are displayed on the
screen, allowing the assembler to speedily and accurately build up the part on its fixture. [Courtesy of
Yamazaki Mazak Ltd.]
It is worth making the point that each machine tool has in situ a range of condition
monitoring equipment: tool breakage/collision devices, tool life monitoring and
adaptive control features ensuring that the cutting process is fully monitored during
the part/s. manufacture.
www.EngineeringBooksPdf.com
Flexible Manufacturing Cells and Systems, Leading to Complete Computer Integrated Manufacture 117
Fig. 2.16. The large prismatic machining line, consisting of travelling column machining centres (three).
Pallets are transferred by rail-guided vehicle with "coded" programmable microchip pallet identification.
[Courtesy of Yamazaki Mazak Ltd.)
This FMS line consists of three travelling column horizontal machining centres, with
rectangular pallets 3500mm long by 1600mm wide. An 80 tool magazine is attached
to each machine tool and old/new cutting tools are delivered by the other "arm" of the
tool highway - both the small and large FMS lines run parallel to each other. A single
auto-stacking crane runs as an RGV, alongSide each machining centre and pallets are
loaded from a 36 tiered pallet pool (see Fig. 2.16). At the end of this FMS line a large
bed way grinder is pOSitioned, and after machining the ways on the castings they can
be ground with the minimum of work transportation.
Pallet identification is operated in the same manner as on the small prismatic FMS
line, using programmable micro-chip coding systems on each pallet for appropriate
identification of workpieces. If, for any reason, a machine tool is taken out of service -
for essential/planned maintenance - the "host" tells its respective MicroVax to re-
schedule the work destined for this machine to a duplicate machine in the line, with
the minimum of disruption to the production schedule, and in this manner, unanti-
cipated or undesired breaks in manufacturing capacity are minimised. Only when
manufacturing systems are designed around "rigidly flexible" strategies can they hope
to gain some measure of efficiency.
As one might expect with such a large metal cutting facility, the disposal of swarf
and coolant control requires particular attention to detail. In fact, a shared under-
ground coolant and chip system was developed carrying 30 tonnes of coolant, with
the capacity to handle and dispose of 20 tonnes of swarf per day. This underfloor
coolant/chip disposal system carries the used coolant to a collection tank where the
swarf is separated and automatically transported outside the building for collection.
www.EngineeringBooksPdf.com
118 CNC Machining Technology
Fig. 2.17. The rotational parts line, consisting of three " mill-centres" fed by robots from stacked pallets.
NB: Chucks have an automatic jaw changing facility. [Courtesy of Yamazaki Mazak Ltd.]
www.EngineeringBooksPdf.com
Flexible Manufacturing Cells and Systems, Leading to Complete Computer Integrated Manufacture 119
Fig. 2.18. The automatic warehouse under the "host's" control, with two AGVs to distribute parts to
assembly areas. [Courtesy of Yamazaki Mazak Ltd.)
www.EngineeringBooksPdf.com
120 CNC Machining Technology
Fig. 2.19. An AGV delivering parts ready for palletising into pallet store for the rotational parts line.
[Courtesy of Yam:azaki Mazak Ltd.)
Fig. 2.20. Sheet metal working - laser path cutting machines, CNC folding and bending machines,
together with automatic welding machines. [Courtesy of Yamazaki Mazak Ltd.)
two laser path cutting machines, CNC folding and bending machines, automatic
welding machines and a storage facility for 180 part varieties. The laser path cutting
machines have the sheets loaded automatically from stacks onto their beds and the
parts are cut out accordingly (Fig. 2.20). However, if some buffering of stock is
required, then the laser leaves the parts attached to the parent sheet at prescribed
intervals, by less than 1 mm, allowing for flat stacking - fully cut out (like a jig-saw
www.EngineeringBooksPdf.com
Flexible Manufacturing Cells and Systems, Leading to Complete Computer Integrated Manufacture 121
Fig. 2.21. Automated transportation of parts to either one of two painting systems, one for cast com-
ponents and the other for sheet metalwork. [Courtesy of Yamazaki Mazak Ltd.)
puzzle) - then broken out when needed. In this manner, the area needed to hold any
buffer stock is kept to a minimum.
At the end of the sheet metal facility is the painting bay, where two systems are
provided: one for cast iron and heavy products and another for sheet metal spraying
(Fig. 2.21). Both systems are automated and the transport of parts through the
spraying booths and drying stages is fully controlled, but unlike automotive fac-
tories where robotic spraying and dipping are used, the actual spraying is completed
manually. Once again, it is worth pausing here for a moment to discuss the reasons
for this manual spraying operation. With such a diverse range of parts to be sprayed -
of relatively low volume - it would be unwise to expend great amounts of money and
effort in fully automating a robotic spraying facility of this type. Such plant would be
hard to justify in terms of equipment, capital and effort. Furthermore, with the well-
proven Japanese philosophy of "keeping it simple", manual spraying will produce a
satisfactory quality and at minimum expense. The final point of being able to know
when, why and by how much, to automate, is why the Japanese have become so
successful in terms of both production throughput and quality.
www.EngineeringBooksPdf.com
122 CNC Machining Technology
Fig. 2.22. The quality control of parts - temperature-controlled environment with a comprehensive range
of metrology equipment. [Courtesy of Yamazaki Mazak Ltd.]
The quality control of high precision parts is assessed in the metrology laboratory
adjacent to the superfinishing facility. Here (Fig. 2.22) in the temperature-controlled
room, spindles, bearings, housings, etc. are inspected for roundness, surface finish,
dimensional/geometrical features on a range of high accuracy equipment: Talyrond
(roundness) and Talysurf (surface finish) instruments, Zeiss CMM (linear and geo-
metric features on prismatic/rotational parts) and other metrological equipment. The
quality information is fed back to the respective MicroVax for logging of data and
quality control action.
Not only is it essential in a "clean room" (Fig. 2.23) to maintain high accuracy and
stability of temperature, but in order to avoid ingression of dust/debris particles in the
air, contaminating the precision surfaces, it is important to purify the air to "class
10000", i.e. as clean as the air above the middle of the Pacific Ocean. The workforce in
the clean room wear special overalls and it is in here where assembly of the spindles
and headstocks for turning centres and spindle cartridges for machining centres
occurs. All sub-assemblies are then continuously tested/monitored on programmed
"trial runs", to ensure that the spindles/cartridges within their housings are operating
satisfactorily.
The assembly hall (not shown) is where the sub-assemblies, machine beds and bought-
in components are all delivered via the large AGVs. Typical machine assemblies
include: spindle units, tool magazines, control units, etc., which are all subjected to
exhaustive run and test procedures for 24 hours, prior to final assembly. The results
www.EngineeringBooksPdf.com
Flexible Manufacturing Cells and Systems, Leading to Complete Computer Integrated Manufacture 123
Fig. 2.23. The clean room and sub-assembly area for critical parts, such as spindles and headstocks
(turning centres), also spindle cartridges (machining centres) prior to complete machine tool assembly.
[Courtesy of Yamazaki Mazak Ltd.)
are continuously monitored and recorded. Machines thus assembled can be directly
despatched, or moved, to customer "prove-out" areas where fixturing and tooling are
fitted by the user, if necessary.
This completes our tour of the manufacturing facility at Yamazaki Mazak's CIM
factory and it is worth concluding with some final comments on total quality man-
agement (TQM). TQM within the factory not only relates to every aspect of quality -
not just one of the machines and its mechanical components - but also, the quality of
the people and procedures adopted in maintaining/improving quality levels. In 1989,
this factory produced about 1000 machine tools, worth then around £70 m, giving a
theoretical turnover per employee (180 production people) of just under £400000. Not
only this, but in a recent survey conducted by a consultancy company, they were the
top company in terms of automation, productivity, quality and ideas.
Such a technological approach to the manufacture of goods must surely be a lesson
to us all, in that there are no mystical thoughts/philosophies in reaching these levels
of production, only well-proven ideas that are efficiently carried out in a practical
common-sense manner. Many companies can achieve similar productive potential
within their existing plants - obviously to a lesser degree - with a clearly defined
strategy of implementation, improvement and capital expenditure. If this is not the
case, then more energetic and expansive companies will steadily, but surely, take over
a staid and complacent competitor.
www.EngineeringBooksPdf.com
124 CNC Machining Technology
It is well known that "direct" feedback monitoring systems, utilising linear scales,
offer much greater axis resolution than their open/closed-loop "indirect" feedback
counterparts. Even here, resolution of the latest scales can only be maintained with any
predictable determination over small linear ranges, when approaching micron levels
of precision. The major reason for this is the structural changes in-cycle, promoted by
differential thermal expansion of the structure influencing the attached linear axis
scales. This non-uniform thermal growth can be minimised by attaching laser inter-
ferometers coupled with suitable optics for each slideway. Such high resolution,
around 40 nanometres (1O-9 m), has already been incorporated onto diamond turning
lathes in production environments and it is only a matter of time before they are
incorporated onto commercially available ultra-high accuracy machine tools.
Laser transducers offer high resolution and are less influenced by thermal growth
characteristics, as thermal and humidity sensors can compensate, to some extent, for
non-linearity of axes and differential thermal growth. The major problem that exists
on such machine tools when used at ultra-high accuracy/precision, is that the machine
tool's structure will have present, in greater or lesser degrees, the following errors,
axes and geometric misalignments:
straightness
flatness
parallelism
positional accuracy
angular: yaw, pitch aI\d roll
www.EngineeringBooksPdf.com
Flexible Manufacturing Cells and Systems, Leading to Complete Computer Integrated Manufacture 125
repeatability
backlash - to some extent, even with ballscrews
velocity - promoted by feedrate (inertial and CNC interpolation errors)
All these errors can combine to influence the volumetric envelope of the machine
tools. It is, however, possible to reduce these interactive elements by incorporating an
"adaptive error compensation" unit. This equipment minutely adjusts the axes in
"real-time" and the axes/geometric errors are minimised. In such a system, sensors
monitor changes in the machine tool structure and software algorithms developed
during the machine's initial calibration - via a total error-mapping of the volumetric
envelope - can be used to modify each axis motion independently during workpiece
machining.
Yet another contributor to errors on machine tools is the product of vibrations
promoted during machining and to a lesser extent the machine tool's damping char-
acteristics. Recently, to improve both the thermal growth and damping effects during
machining for highly accurate machine tools, "Granitan" has found much favour. This
is the product of crushed granite and thermosetting resins bonded to improve thermal
expansion by five times and damping by ten times, although such advantages mean a
more expensive and heavy machine tool structure.
One of the first questions one might ask is, "Why do we need to machine at ultra-high
speeds?". There are a number of important production benefits that can be gained by
such an approach:
increased productivity
minimal changes in material properties
distortion of workpiece reduced
burr-free improved finish
thin-section machining potential
tool life improvements
reduction in cutting tool varieties
fixturing of simpler design
Prior to a discussion on these important benefits, it is worth making the point
that the term ultra-high speed machining refers to peripheral speeds in excess of
1500m/min.
Increased Productivity
www.EngineeringBooksPdf.com
126 CNe Machining Technology
With more energy efficient and "cleaner" machining available from ultra-high spindle
speeds, improvements in both surface finish (arithmetical mean roughness) together
with burr-free edges occur. Burrs always present problems during the production of
parts, as in many cases costly hand finishing becomes the only real alternative with
larger components. Such extra manual intervention adds value to the part whilst
increasing lead times.
By utilising ultra-high rotational speeds, the cutter forces are reduced significantly,
which allows very thin wall and base sections to be machined. Typically a part feature
might be a deep pocket to be machined from solid at ultra-high speed: roughing out
using a 25 mm diameter slot drill and finish machined with a 12 mm diameter endmill
in a very fast time, having a wall thickness of 1 mm and height of 33 mm. However,
thickness can be down to 0.3 mm wide and of greater heights than the machined part
just mentioned typically an 18:1 ratio (Le. depth:cutter ratio), which would be
impossible, in terms of geometric/linear tolerances, when using conventional milling
rotational speeds.
www.EngineeringBooksPdf.com
Flexible Manufacturing Cells and Systems, Leading to Complete Computer Integrated Manufacture 127
such as angles on the part, or barrel milling cutters may be required to machine
contours, minimising cusp height effects. The ultra-high speed machining action
ejects the swarf from the cutting vicinity, when tooling is correctly designed, and, in
so doing, eliminates any secondary cutting promoted by trapped chips. Therefore, the
need to be continuously changing to different diameter cutters, to provide better swarf
clearance, is reduced, improving in-cut and tool changing times.
The many benefits of ultra-high speed machining (force reduction, lower workpiece
distortion and so on) combine to allow simpler and cheaper fixturing. Often all that is
necessary are simple base plates for component location and restraint, with the need
for costly fixturing only being necessary very occasionally.
It follows that if these are the benefits to be gained when ultra-high speed ma-
chining, then there must also be some problems that must be addressed when
utilising this technique for milling/drilling on machining centres.
In order to gain the significant benefits when milling at ultra-high speed, several
problems not associated with conventional rotational speeds must be overcome:
machine tool's accuracy and rigidity
cutting spindle performance
tool holder and cutter design
axis drive control capability
controller processing speed
www.EngineeringBooksPdf.com
128 CNC Machining Technology
power, the heat generated does not cause thermal instability, which would not only
reduce bearing life but influence machining accuracies.
As the rotational speed increases the spindle nose taper must be reduced in order
to overcome the high cantilevered rotational masses and the centrifugal forces in-
fluencing cutter/holder stability. Therefore at just over 20000 r. p.m .. the 40 Inter-
national (or its equivalent) taper is satisfactory, but when over 30000r.p.m. the 30
international taper is preferred and so on; it needs to be of short length whenever
possible. Both spindle nose and tool adaptor tapers are made to a tolerance, which in
turn can cause a radial out-of-balance, owing to the cutting forces, to occur. Not only
will it be necessary to minimise radial out-of-balance effects, but axial balance, along
the tool's and adaptor's length, needs to be addressed similarly if the cutting action is
not to be de-stabilised during machining. At present, most companies machining at
these speeds have only been "single-plane" balancing - for radial balance - whereas
"dual-plane" dynamic balancing is the requirement. Such "dual-plane" balanced
tooling is very difficult to achieve at present and further work on high-speed dynamic
balancing, prior to use on these machines is necessary if their full cutting potential is
to be realised. As an example of radial out-of-balance, if a cutter/holder is to be rotated
at about 25000r.p.m., then only several micrometres of radial motion can be tolerated,
otherwise it becomes unbalanced. Yet another problem occurs at high rotational
speeds - the spindle nose taper swells owing to centrifugal force and Z-axis posi-
tioning is influenced as the cutter body is pulled back by the draw-bar. Not only is
out-of-balance a product of rotational speed, cutter balancing and its fit in the spindle
nose, but it is also affected by driving dog deSign, when present. However, this is
outside the remit of the current discussion.
What was said about ultra-high speed milling in the previous statement is equally
true for processing speed when machining with fast feedrates (see section 1.5,
Volume II).
Not only should the "look-ahead" capability of the controller be enhanced, but the
processing speed should ideally be in the region of 2-8ms in order to minimise
potential "data starvation", which causes hesitation in cutter/slideway response.
By now the reader should have gained an appreciation of not only the benefits to be
gained from utilising machine tools equipped for ultra-high speed milling applica-
tions, but some of the problems that need to be addressed by both the builder and
www.EngineeringBooksPdf.com
Flexible Manufacturing Cells and Systems, Leading to Complete Computer Integrated Manufacture . 129
Fig. 2.24. Ultra-fast high-frequency spindles with "active" magnetic bearings. BOOOOmin-t, lOkW, SKI
25; 60000min-t, 20kW, SKI 30; 40 000 min-I, 4OkW, SKI 40. [Courtesy of Rudolfe Came Ltd/IBAG.]
tooling supplier. In the following pages, let us look at two potential direct-drive
spindles currently available, that could be fitted for such work:
magnetic "active" spindles
pneumatic spindles
www.EngineeringBooksPdf.com
130 CNC Machining Technology
Table 2.3.
In the event of a malfunction, two small angular contact "catch" bearings - 0.2mm
clear of the shaft - provide emergency support. To maintain control of the spindle at
all times requires an: electrical/electronic frequency converter for the high-frequency
spindle drive; water tanks, pumps and heat exchanger for spindle jacket cooling,
pneumatic filter regulator for hydropneumatic tool clamping; spray coolant and
filtration system and finally, a separate electronic regulation and computer unit.
In order to minimise the tool balancing problem (alluded to earlier) at high rota-
tional speed, a taper/contact face system was developed. This tool holding system
utilises a Belleville spring tensioned drawbolt which engages the holder bringing it
into the taper and, as it does so, a small elastic distortion of the spindle nose housing
allows the toolholder shoulder contact.
Although these spindles cost approximately double the conventional ball bearing
models, the real savings can be appreciated in Table 2.3 for a comparison of milling
aluminium with a solid carbide cutter, 20 mm diameter having two flutes, with a
depth of cut 10 mm and a feed per tooth of 0.2 mm.
Pneumatic Spindles
The air-lubricated bearing has been with us for some time and new applications are
being identified as these bearings become more widely known and understood. In
principle, the nature of an aerostatic bearing consists of a cylindrical bush having two
rows of gas feed holes spaced evenly around the bearing circumference. The bearing
is surrounded by a reservoir, into which gas is fed at pressure. The bearing carries a
cylindrical shaft and, in operation, gas flows from the reservoir through the feed holes
into an angular space between the shaft and bushing. From here, it flows axially (see
Fig. 2.25b), escaping to atmosphere from the ends of the bearing. The pressure falls as
the gas flows through the feed holes and enters the bearing clearance. It falls still
further, as the gas flqws towards the ends of the bearing, before finally exhausting
to air. If we assume the condition of a weightless shaft occurs, then it will float con-
centrically within the bearing and all pressure forces will balance.
When a load is applied to the shaft, then the clearance between the shaft and the
bushing diminishes in the direction of the load. The effect of this change in clearance
is to increase the resistance to air flow at the zone of smallest clearance, resulting in an
www.EngineeringBooksPdf.com
Flexible Manufacturing Cells and Systems, Leading to Complete Computer Integrated Manufacture 131
increase in air pressure. Conversely, where the clearance has increased, then the
resistance to flow is diminished and the pressure falls. Thus a new equilibrium
position is established, where the pressure difference across the shaft balances the
applied load.
The aerodynamic bearing is capable of generating the necessary load balancing
forces within itself, by virtue of rotation alone, enabling the bearing system to operate
without the need for an external pressure supply, thus offering the potential for air-
lubricated bearings without external air supply.
The hybrid bearing is basically an aero static bearing where advantage is taken of the
inherent self-generating load capacity of the aerodynamic bearing. Therefore, we thus
have an aerostatic bearing which, when operating at the design speed, can have
between two to three times the static load capacity. Such characteristics are of par-
ticular significance if they are to be used for ultra-high speed machining spindles.
Typ:cally, in Fig. 2.25a, can be seen an aerodynamic thrust bearing with spiral
grooves and a commercially available spindle might offer the following benefits:
high rotational speeds - 10000-30000r.p.m.
powerful electric motor -15.5kW at 30000r.p.m.
large bearing load capacities - these increase dramatically with speed for high table
feed "ates
low vibration and high bearing stiffness, offering excellent surface finish
minimal maintenance and indefinite working life - owing to non-contacting rotational
parts
The future of ultra-high speed machining will allow us to approach the theoretical
optimum cutting volume for, say, high-grade aluminium. This means that it should be
possible to remove stock up to 120cm3 /min/kW. Currently, the best machine tools can
mill at around 73cm3 /kW and shortly one Japanese machine tool manufacturer will be
achieving stock removal rates of 80cm3 /kW at 40000r.p.m. So, in summary, we can
say that "true" high speed machining is now a practical reality for machining non-
ferrous and many non-metallic materials and work is continuing in the development
of cutting steels and more exotic materials for the aerospace industries.
With the continuing development in machining centre spindles, for greater speed,
accuracy, thermal stability, damping capacity and so on, there has been a similar
advance in the latest turning centre headstocks. Direct-driven headstocks are now
beginning to appear on the more advanced machines (typical of such a headstock is
that depicted in Fig. 2.26a) as their belt-driven cousins are now beginning to "show
their age". Just why these direct-drive headstocks are replacing the traditional belt-
driven varieties can be seen in Fig. 2.26b, where the combination of spindle motor
plus drive (belts) cause an undulating and irregular harmonic rotational motion. The
influence of this irregular harmonic belt-driven rotation can be appreciated by the
schematic representation in Fig. 2.26c, where a tumbling three-Iobed-harmonic-shape
is reproduced on the workpiece by the action of the headstock's rotation and the
linear motion of the cutting tool.
In Fig. 2.26d, there is virtually no harmonic influence on the workpiece using a
direct-drive spindle and a much more consistent part results, in terms of both its
geometrical and linear dimensions. Yet other benefits accrue when using direct-drive
www.EngineeringBooksPdf.com
Direction of
Pressure
p
L-~
Showing
__ _ the basic principles of an air lubricated bearing indicating the airflow.
www.EngineeringBooksPdf.com
Flexible Manufacturing Cells and Systems, Leading to Complete Computer Integrated Manufacture 133
Fig. 2.25. Details of air-driven high-speed spindles used in milling applications. a A typical aerodynamic
thrust bearing with spiral grooves. Air is dragged into the grooves by virtue of the relative motion of the
plates and a pressure rise is caused by the restriction of the sealing band with consequent load gener-
ation. b A cutaway diagram of an air-driven spindle. c An ultra-high speed milling operation on an
aluminium component. [Courtesy of Westwind Air Bearings Ltd.]
spindles, which include lower maintenance (no belt-tensioning problems and a more
uniform load on the bearings), better thermal growth characteristics, higher spindle
accuracy and improved damping.
In recent years there has been pressure to achieve not only consistent dimensional
and geometrical tolerances on high precision parts, but also superior surface finishes.
Probably the "driving force" behind this development has been the optical industry,
where diamond-lapped surface configurations used to take days, if not months, for
the large monolithic mirrors used in the optical industry, or for astronomical tele-
scopes. With the advent of diamond machining techniques, such large removal of
stock, via coarse lapping, has been virtually eliminated, as these machine tools can
generate a very close approximation to the tenths of wavelengths of light configura-
tions needed in the final optical product. Hence, finish lapping with micron/sub-
micron diamond pastes is all that is required to complete the product to its best optical
configuration.
Not only is the optical industry in need of faster methods of production, but other
exacting precision parts (of diverse shape, size and complexity) requiring superior
finishes are being demanded by industry.
www.EngineeringBooksPdf.com
COOLING
ROTOR
CHUCK
SPINDLE
COOLING GROOVES
SPINDLE
SPINDLE
PLUS
MOTOR
&
DRIVE
RESULTANT
www.EngineeringBooksPdf.com
Flexible Manufacturing Cells and Systems, Leading to Complete Computer Integrated Manufacture 135
d
Fig. 2.26. The component quality is improved by using direct-drive spindles, rather than belt-driven
headstocks on turning centres. a Direct-drive spindle cartridge for a turning centre. b The sinusoidal
influence of component elements on a belt-driven headstock. c The harmonic effect of a belt-driven
headstock on a turned component. d The harmonics virtually disappear on the component when direct-
drive spindles are utilised. [Courtesy of Yamazaki Mazak Ltd.)
www.EngineeringBooksPdf.com
136 CNC Machining Technology
NANOCENTRE
Fig. 2.27. Possibly the most accurate and advanced diamond turning/grinding centre at present available.
[Courtesy of CUPE Ltd.]
problem with conventionally abrading the diamond tooling to obtain the desired
geometry, has meant that the irregular form of the tool nose radius has, when cutting,
produced scratches in the surface of the component that need to be polished out later.
The technique of chemically machining the edge away - by automatically removing
the tool's surface atom-by-atom exposing an ultra-smooth planar face that is sub-
stantially co-planer with the naturally occurring crystal plane within the crystalline
structure of the diamond - produces a super-smooth cutting tool edge which, when
magnified optically x 10 000 still looks smooth. When machining this molecular-level
chemically machined tool profile, significant savings in post-machining finishing are
offered and will become more important as diamond machining applications expand.
Fig. 2.27 shows possibly the ultimate in advanced machine tool design in terms
of diamond turning and grinding capacity currently available today. Let us look in
some detail at what makes this machine tool so special. It has a three-axis CNC
controller, using a "T-type" base and bridge construction, providing high loop stiff-
ness between the tool and workpiece. The "T-base" is constructed from Granitan
5100, giving excellent stiffness and high damping characteristics. Vibrations are
minimised by supporting the base on a three point, self-levelling pneumatic vibration
isolation system. The work spindle is built into the bridge carriage, which moves at
90° to the spindle axis and the tool post is mounted on a separate carriage moving
parallel to the spindle axis.
Carriage ways utilise hydrostatic bearings providing smooth motion with good
damping, high stiffness and load carrying capacity, with freedom from "slip-stick" -
essential requirements when servo positioning slides down to 1.2 nm. Oil temperature
is controlled to 0.01°C, ensuring thermal stability of the machine. The drive systems
to both carriages incorporate direct drive frameless d.c. torque motor/tachogenerators
mounted directly. Linear displacement for each axis is via laser interferometry (based
www.EngineeringBooksPdf.com
Flexible Manufacturing Cells and Systems, Leading to Complete Computer Integrated Manufacture 137
upon heterodyne interferometry) with He-Ne lasers and the total system has been
designed to minimise Abbe offset errors. The environmental effects on the laser path
are corrected by an optical wavelength compensator, built into the system.
The workspindle is an oil hydrostatic bearing type, designed for high stiffness and
low error motion. Once again, thermal stability is maintained through careful material
selection and construction, coupled with oil temperature control to ±O.l°C. The
spindle is driven by a high performance brushless d.c. motor, directly mounted onto
the spindle, with rotary encoder for fast tool servo applications; a stepless variable
speed with bi-directional motion, having dynamic balancing capacity, vacuum work-
holding and a temperature-controlled drive motor is utilised.
The B-axis rotary table allows the cutting tool tip to always be at a tangent to the
surface being cut, i.e. normal to the cutting surface. Having the tool at such an
orientation to the part eliminates errors due to tool tip irregularities. To maximise tool
life, the B-axis can present an unused portion of the tool tip (by a small angular
offset), furthermore, permitting versatility when machining Fresnel optics, as well as
allowing the table to be indexed for the fly-cutting of optical polygons. The table is
supported by hydrostatic bearings and a direct-drive frameless d.c. torque motor/
tachogenerator is mounted directly onto the table with a rotary encoder.
A critical element on a diamond turning machine is the toolholder, with the tools
having an 8 x 8 mm cross-section tool shank, closely supported to minimise tool
overhang and improve rigidity. Tool setting is by a "station" located to the right-hand
side of the workhead and utilises two air-bearing Linear Variable Differential Trans-
formers (LVDT) gauge heads - one to determine the X-offset and the other the Z-offset
for height adjustment. Tool setting is a fully automated function under CNC control
and can be initiated at any time during machining. Later, a non-contacting optical tool
setting station will be available for this machine tool.
The machine utilises one of the most advanced CNC systems with its "electronic
gearbox" capability, ensuring "zero following error" performance. The controller
offers exceptional tool path accuracy by virtue of its unique high resolution, fast feed
forward techniques - eliminating servo following errors. Yet another unusual feature
of this controller is its on-line cubic spline interpolation facility. This allows data of the
path definition to be input by either the equation of shape for the component surface -
entered at the operator's control panel, or via a personal computer - or using the
minimum number of datapoints. Both techniques eliminate the need for conventional
post-processing of data. Other features available with this CNC include:
software error compensation
tool error mapping
error compensation for: B-axis, rotary motion and scale error
volumetric error compensation for: cubic lattice and parametric errors
dynamic error compensation
thermal growth, e.g. in spindle
refractive index. e.g. laser interferometry
fast tool servos
metrology frame methods (see final section in book)
diagnostics
fault indication
performance monitoring for safety
Finally, let us tum our attention to possibly the most expensive and accurate
machine tool ever made, utilising the latest trends in machine tool technology.
www.EngineeringBooksPdf.com
138 CNC Machining Technology
b
Fig. 2.28. The most sophisticated machine tool currently available with the ability to machine optical
curvatures on large monolithic mirror blanks. There is an in-situ interferometric probe used adjacent to
the spindle for surface evaluation. a A sectional diagram illustrating the major elements in the 3-axis
machine tool. b The large Granitan structure with ultra-precise straight edge ways. The machine incor-
porates laser-controlled slideways and hydrostatic bearings. [Courtesy of CUPE Ltd.]
www.EngineeringBooksPdf.com
Flexible Manufacturing Cells and Systems, Leading to Complete Computer Integrated Manufacture 139
The machine tool shown schematically in Fig. 2.28a and actually in Fig. 2.28b, has
been designed and built in the UK to generate and measure off-axis elements prior to
final polishing. This machine tool weighs approximately 130 tonnes, having a com-
ponent capacity of 2.5 m X 2.5 m X 0.6 m, but its overall length being 8 m X 6 m x
5 m. An advanced three-axis CNC controller is used together with an in-situ probe;
also incorporated is a multiple path laser interferometer system to achieve the re-
quired component quality.
This machine tool incorporates polystyrene cores surrounded by Granitan S100
structure, suitably supported by light steel weldments, offering high stability and
internal damping. The base is made in four sections, each weighing approximately 17
tonnes, with outer guideway members mounted on either side of the two centre
spacing sections. To ensure precise re-assembly in the USA (Kodak), the base unit
mounting faces were scraped flat. A 2.5 m X 2.5 m cast iron worktable was kine-
matically mounted onto the base structure in such a manner that any deflections
caused by gantry motions did not produce table distortion. Weight relieving systems
were fitted to minimise excessive loading on the kinematic location positions. The
surrounding metrology frame was kinematically connected to the worktable - with its
own weight relieving systems. The table and metrology frame were designed to
compensate for thermal changes in the structure and were closely linked to the
fabricated optical reference flats (Corning ULE 7971 titanium silicate material) in the
metrology frame; each reference flat being 2.75m x 0.3m x 0.1 m. The travelling
gantry - Granitan filled weldments - carried the spindle and in-situ metrology system.
Torque motor DC drives on the X and Y axes were by traction-friction, with each
drive unit being mounted directly, driving a "vee" roller which in turn operated
against a rigid circular section drive bar. Sagging of the drive bar was prevented by
spring-loaded devices positioned at intervals along its length. Slippage of the gantry
(caused by machining forces or acceleration) was prevented using a preloaded roller,
providing sufficient force to maintain the drive rollers in contact with each traction bar
at all times. The shorter Z-axis was controlled via the conventional ballscrew system,
but with a backlash-free non-influencing nut. The ballscrew had a directly mounted
d.c. torque motor which was mechanically counterbalanced.
To obtain the desired accuracy and resolution for each axis motion, the reference
measurement system was via the "metrology frame concept" - this being utilised in
the past on a number of high-precision machines. The basic reference frame is by
three precision glass reference bars, principally for the control of the Z-axis. In prac-
tice, two reference bars are mounted either side of the worktable in the X-direction,
which are nominally parallel and coplanar to the table. The third reference bar is
mounted above and at right angles to the "X-bars", forming the reference for motions
in the Y-direction, but all are mounted at the" Airy points", providing, in this case,
the "points of minimum deflection" required for straight edges. In order to control the
machine to the desired accuracy/precision, a built-in multi-path laser interferometer
system is provided. Using three lasers and associated optics, the output beam is split
three ways providing a comprehensive monitoring system for each axis. Furthermore,
if any changes in environmental conditions occur such as temperature/humidity,
these are immediately detected and compensation is actioned automatically. The laser
resolution is to 2.5 nm across the volumetric envelope of the machine tool.
The in-situ gauging head alluded to earlier, can be used for the in-process inspec-
tion of any large three-dimensional optical elements. The form of the surface profile
can be defermined from the vertically acting measuring probe mounted adjacent to the
spindle. The workpiece's optical surface can be completely scanned, providing a
global evaluation of the machined surface. Surface data can be analysed using pro-
www.EngineeringBooksPdf.com
140 CNC Machining Technology
www.EngineeringBooksPdf.com
Appendix
National and International Machine
Tool Standards
PART 1: 1990 Code of practice for testing geometric accuracy of machines operating
under no load, or finishing operations;
geometric and practical test methods,
definitions,
use of checking instruments,
explanation of tolerances,
description of preliminary checking operations,
description of accuracy of instruments required.
PART 2: 1991 Statistical methods for determination of accuracy and repeatability of
machine tool;
linear and rotary positioning errors applied to CNC machine tools,
angular (pitch, yaw and roll) and straightness positioning errors
applied to CNC and manually controlled machine tools.
PART 3: 1990 Method of testing performance of machines operating under loaded
conditions in respect of thermal distortions;
thermal distortion of structure,
thermal drift of axis drives.
www.EngineeringBooksPdf.com
Glossary of Terms
A
A AXIS - The axis of rotary motion of a machine tool member or slide about the X
axis.
ABSOLUTE ACCURACY - Accuracy as measured from a reference which must be
specified.
ABSOLUTE DIMENSION - A dimension expressed with respect to the initial zero
point of a coordinate axis.
ABSOLUTE POINT (Robots) - Equivalent to absolute coordinates in NC machines.
The coordinates of a data point are defined in relation to an absolute zero.
ABSOLUTE PROGRAMMING - Programming using words indicating absolute
dimensions.
ABSOLUTE READOUT - A display of the true slide position as derived from the
position commands within the control system.
ABSOLUTE SYSTEM - NC system in which all positional dimensions, both input and
feedback, are measured from a fixed point of origin.
ACCANDEC - (Acceleration and deceleration) Acceleration and deceleration in
feedrate; it provides smooth starts and stops when operating under NC and when
changing from one feedrate value to another.
ACCEPTANCE TEST - A series of tests which evaluate the performance and capa-
bilities of both software and hardware.
ACCESS TIME - The time interval between the instant at which information is:
1. called for from storage and the instant at which delivery is completed, i.e., the read
time; 2. ready for storage and the instant at which storage is completed, i.e., the write
time.
ACCUMULATOR - A part of the logical arithmetic unit for a computer. It may be
used for intermediate storage to form algebraic sums, or for other intermediate
operations.
ACCURACY - 1. Measured by the difference between the actual position of the
machine slide and the position demanded. 2. Conformity of an indicated value to a
true value, i.e., an actual or an accepted standard value. The accuracy of a control
system is expressed as the deviation or difference between the ultimately controlled
variable and its ideal value, usually in the steady state or at sampled instants.
www.EngineeringBooksPdf.com
Glossary of Terms 143
X Y XandY
o o o
o 1 o
1 o o
1 1 1
www.EngineeringBooksPdf.com
144 Glossary of Terms
B
B AXIS - The axis of rotary motion of a machine tool member or slide about the Y
axis.
BACKGROUND - In computing the execution of low priority work when higher
priority work is not w'iing the computer.
BACKGROUND PROCESSING - The automatic execution of computer programs
in background.
BACKLASH - A relative movement between interacting mechanical parts, resulting
from looseness.
BAND - The range of frequencies between two defined limits.
www.EngineeringBooksPdf.com
Glossary of Terms 145
BASE - A number base. A quantity used implicitly to define some system of rep-
resenting numbers by positional notation. Radix.
BATCH - A number of items being dealt with as a group.
BATCH PROCESSING - A manufacturing operation in which a specified quantity of
material is subject to a series of treatment steps. Also, a mode of computer operations
in which each program is completed before the next is started.
BAUD - A unit of signalling speed equal to the number of discrete conditions or
signal events per second; 1 bit per second in a train of binary signals, and 3 bits per
second in an octal train of signals.
BEHIND THE TAPE READER - A means of inputting data directly into a machine
tool control unit from an external source connected behind the tape reader.
BENCHMARK - A standard example against which measurements may be made.
BILL OF MATERIALS - A listing of all the parts that constitute an assembled
product.
BINARY - A numbering system based on 2. Only the digits 0 and 1 are used when
written.
BINARY CIRCUIT - A circuit which operates in the manner of a switch, that is, it is
either" on" or "off".
BINARY CODED DECIMAL (BCD) - A number code in which individual decimal
digits are each represented by a group of binary digits; in the 8-4-2-1 BCD notation,
each decimal digit is represented by a four-place binary number, weighted in se-
quence as 8, 4, 2 and 1.
BINARY DIGIT (BIT) - A character used to represent one of the two digits in the
binary number system, and the basic unit of information or data storage in a two-state
device.
BLOCK - A set of words, characters, digits, or other elements handled as a unit. On a
punched tape, it consists of one or more characters or rows across the tape that
collectively provide enough information for an operation. A "word" or group of
words considered as a unit separated from other such units by an "end of block"
character (EOB).
BLOCK DELETE - Permits selected blocks of tape to be ignored by the control system
at discretion of the operator with permission of the programmer.
BLOCK DIAGRAM - A chart setting forth the particular sequence of operations to be
performed for handling a particular application.
BLOCK FORMAT - The arrangement of the words, characters and data in a block.
BODE DIAGRAM - A plot of log amplitude ratio and phase angle as functions of log
frequency, representing a transfer function.
BOOLEAN ALGEBRA - An algebra named after George Boole. This algebra is similar
in form to ordinary algebra, but with classes, propositions, yeslno criteria, etc., for
variables rather than numeric quantities, it includes the operator's AND, OR, NOT,
EXCEPT, IF THEN.
BOOTSTRAP - A short sequence of instructions, which when entered into the
computer's programmable memory will operate a device to load the programmable
memory with a larger, more sophisticated program - usually a loader program.
BUFFER STORAGE - 1. A place for storing information in a control for anticipated
transference to active storage. It enables control system to act immediately on stored
information without waiting for the tape reader. 2. A register used for intermediate
storage of information in the transfer sequence between the computer's accumulators
and a peripheral device.
www.EngineeringBooksPdf.com
146 Glossary of Terms
C
C AXIS - The axis of rotary motion of a machine tool member or slide about the Z
axis.
CALIBRATION - Adjustment of a device, such that the output is within a specified
tolerance for particular values of the input.
CANCEL - A command which will discontinue any canned cycles or sequence
commands.
CANNED CYCLE - A preset sequence of events initiated by a single NC command,
e.g., G84 for NC tap cycle. Also fixed cycle.
CANONICAL FORM - A standard numerical representation of data.
CATHODE RAY TUBE (CRT) - A display device in which controlled electron beams
are used to present alphanumeric or graphical data on a luminescent screen.
CENTRAL PROCESSING UNIT (CPU) - The portion of a computer system consisting
of the arithmetic and control units and the working memory.
CHANNEL - A communication path.
CHARACTER - One of a set of symbols. The general term to include all symbols such
as alphabetic letters, numerals, punctuation marks, mathematic operators, etc. Also,
the coded representation of such symbols.
CHIP - A single piece of silicon which has been cut from a slice by scribing and
breaking. It can contain one or more circuits but is packaged as a unit.
CIRCULAR INTERPOLATION - 1. Capability of generating up to 90 degrees of arc
using one block of information as defined by EIA. 2. A mode of contouring control
which uses the information contained in a single block to produce an arc of a circle.
CLDATA - Cutter location data (see CLFILE).
CLEAR - To erase the contents of a storage device by replacing the contents with
blanks or zeros.
CLEARANCE DISTANCE - The distance between the tool and the workpiece when
the change is made from rapid approach to feed movement to avoid tool breakage.
CLFILE -- Cutter location file (see CLDATA).
CLOCK - A device which generates periodic synchronisation signals.
CLOSED LOOP - A signal path in which outputs are fed back for comparison with
desired values to regulate system behaviour.
CNC - Computer (Computerised) Numerical Control - A numerical control system
wherein a dedicated, stored program computer is used to perform some or all of the
basic numerical control functions.
COMMAND - An operative order which initiates a movement or a function.
COMPATIBILITY - The interchangeability of items.
COMPILER - A program which translates from high-level problem-oriented computer
languages to machine-oriented instructions.
COMPONENT - One of the parts of which an entity is composed.
COMPUTER - A device capable of accepting information in the form of signals or
www.EngineeringBooksPdf.com
Glossary of Terms 147
www.EngineeringBooksPdf.com
148 Glossary of Terms
CYCLE TIME - The period required for a complete action. In particular, the interval
required for a read and a write operation in working memory, usually taken as a
measure of computer speed.
CYCLING CONTROL - A fundamental level machine control which programs the
machine through dial or plugboard input.
D
DAMPING - A characteristic built into electrical circuits and mechanical systems to
prevent rapid or excessive corrections which might lead to instability or oscillatory
conditions.
DATA - Facts or information prepared for processing by, or issued by, a computer.
DATABASE - Comprehensive files of information having a specific structure such
that they are suitable for communication, interpretation and processing by both
human and automatic means.
DATA POINT - A programmed point which contains tool plant coordinate data and
functional information.
DEAD BAND - The range through which an input can be varied without initiating
response, usually expressed in percentage of span.
DEAD TIME - The interval between initiation of a stimulus change and the start of
the resulting response.
DEAD ZONE - A range of inputs for which no change in output occurs.
DEBUG - To detect, locate, and remove mistakes from computer software or
hardware.
DECADE - A group of assembly of ten units.
DECADE SWITCHING - Use of a series of switches each with ten positions with
values of 0 to 9, in which adjacent switches have a ratio of value of 10:1.
DECIMAL CODE - A code in which each allowable position has one of 10 possible
states. (The conventional decimal number system is a decimal code.)
DECODER - A circuit arrangement which receives and converts digital information
from one form to another.
DEDICATED - Devoted to a particular function or purpose.
DEVIATION - The error or difference between the instantaneous value of the con-
trolled variable and the setpoint.
DIAGNOSTIC ROUTINE - A program which locates malfunctions in hardware or
software.
DIGITAL - Representation of data in discrete or numerical form.
DIGITAL COMPUTER - A computer that operates on symbols representing data, by
performing arithmetic and logic operations.
DIGITAL-TO-ANALOG (D-A) CONVERSION - Production of an analog signal,
whose instantaneous magnitude is proportional to the value of a digital input.
DIGITISE - To obtain the digital representation of a measured quantity or continuous
signal.
DIRECTOR - A term used to designate an NC control unit.
DISCRETE - State of being separate or distinct, as opposed to a continuously varying
state or condition.
DISCRETE COMPONENT CIRCUIT - An electrical circuit, implemented with in-
dividual transistors, resistors, diodes, capacitors, or other components.
DISK - A device on which information is stored.
www.EngineeringBooksPdf.com
Glossary of Terms 149
E
EBCDIC - Extended binary coded decimal interchange code.
EDIT - To modify a program, or alter stored data prior to output.
EDITOR - A computer program which provides the ability to edit.
EIA STANDARD CODE - Anyone of the Electronics Industries Association standard
codes for positioning, straight-cut, and contouring control systems.
ELECTROMAGNETIC INTERFERENCE (EMI) - Unwanted electrical energy or noise
induced in the circuits of a device, owing to the presence of electromagnetic fields.
EMULATOR - A device or program which behaves like another system, and pro-
duces identical results.
ENCODER - An electromechanical transducer which produces a serial or palaUel
digital indication of mechanical angle or displacement.
END EFFECTOR (Robots) - The general term used to describe a gripper or other tool
used on a robot.
END OF BLOCK CHARACTER - 1. A character indicating the end of a block of tape
information. Used to stop the tape reader after a block has been read. 2. The type-
writer function of the carriage return when preparing machine control tapes.
END OF PROGRAM - A miscellaneous function (M02) indicating completion of a
workpiece. (Stops spindle, coolant, and feed after completion of all commands in the
block. Used to reset cont.·ol and/Or machine.)
www.EngineeringBooksPdf.com
150 Glossary of Terms
END OF TAPE - A miscellaneous function (M30) which stops spindle, coolant and
feed after completion of all commands in the block. (Used to reset control and/or
machine.)
END POINT - An extremity of a span.
ERROR - The difference between the indicated and desired values of a measured
signal.
ERROR DETECTING - A data code in which each acceptable term conforms to
certain rules, such that if transmission or processing errors occur, false results can be
detected.
ERROR SIGNAL - Difference between the output and input signals in a servo
system.
EXCLUSIVE OR - A logical operator, which has the property such that if X and Yare
two logic variables, then the function is defined by the following table:
X Y Function
o o o
o 1 1
1 o 1
1 1 o
F
FEEDBACK - The signal or data fed back to a commanding unit from a controlled
machine or process to denote its response to the command signal. The signal rep-
resenting the difference between actual response and desired response that is used by
the commanding unit to improve performance of the controlled machine or process.
FEEDBACK CONTROL - Action in which a measured variable is compared to its
desired value, with a function of the resulting error signal used as a corrective
command.
FEEDBACK DEVICE - An element of a control system which converts linear or rotary
motion to an electrical signal for comparison to the input signal, e.g., resolver,
encoder, inductosyn.
FEEDBACK LOOP - A closed signal path, in which outputs are compared with
desired values to obtain corrective commands.
FEEDBACK RESOLUTION - The smallest increment of dimension that the feedback
device can distinguish and reproduce as an electrical output.
FEEDBACK SIGNAL - The measurement signal indicating the value of a directly
controlled variable, which is compared with a setpoint to generate a correction
command.
FEED ENGAGE POINT - The point where the motion of the Z axis changes from
rapid traverse to a programmed feed (usually referred to as the "R" dimension).
www.EngineeringBooksPdf.com
Glossary of Terms 151
www.EngineeringBooksPdf.com
152 Glossary of Terms
G
G CODE - A word addressed by the letter G and followed by a numerical code
defining preparatory functions or cycle types in a numerical control system.
GAIN - The ratio of the magnitude of the output of a system with respect to that of
the input (the conditions of operation and measurements must be specified, e.g.,
voltage, current or power).
GATE - A device which blocks or passes a signal depending on the presence or
absence of speCified input signals.
GAUGE HEIGHT - A predetermined partial retraction point along the Z axis to which
the cutter retreats from time to time to allow safe X- Y table travel.
GENERAL PURPOSE COMPUTER - A computer designed and capable of carrying
out a wide range of tasks.
GENERAL PURPOSE PROCESSOR - A computer program which carries out com-
putations on the part program and prepares the author location data for a particular
part without reference to machines on which it might be made.
GRAPHICS - The use of a computer to interactively create a drawing displayed on a
terminal.
GRAY CODE - A binary code, in which successive values differ in one place only.
GROUP TECHNOLOGY - The grouping of machines and of parts based on similarities
in production requirements such that the parts may be produced more efficiently.
H
HALF DUPLEX - Allows the transmission of information one way at a time.
HARD COPY - Any form of computer-produced printed document. Also, sometimes
punched cards or paper tape.
HARDWARE - Physical equipment.
HEAD - A device, usually a small electromagnet on a storage medium such as
magnetic tape or a magnetic drum, that reads, records, or erases information on that
medium. The block assembly and perforating or reading fingers used for punching or
reading holes in paper tape.
HOUSEKEEPING - The general organisation of programs stored to ensure efficient
system response.
HYSTERESIS - The difference between the response of a system to increasing and
decreasing signals.
I
IC - Integrated circuit.
INCREMENTAL DIMENSION - A dimension expressed with respect to the pre-
ceding point in a sequence of points.
www.EngineeringBooksPdf.com
Glossary of Terms 153
www.EngineeringBooksPdf.com
154 Glossary of Terms
J
JCL - Job control program
JOB - An amount of work to be completed.
JOG - A control function which provides for the momentary operation of a drive for
the purpose of accomplishing a small movement of the driven machine.
K
KEYBOARD - The keys of a teletype-writer which have the capability of transmitting
information to a computer but not receiving information.
L
LAG - Delay caused by conditions such as capacitance, inertia, resistance or dead
time.
LANGUAGE - A set of representations and rules used to convey information.
LAYOUT - A visual representation of a complete physical entity usually to scale.
LEVEL - 1. Formerly a channel of punched tape. 2. The average amplitude of a
variable quantity applying particularly to sound or electronic signals expressed in
decibels, volts, amperes, or watts. 3. The degree of subordination in a hierarchy.
LIGHT PEN - A photo sensing device similar to an ordinary fountain pen which is
used to instruct CRT displays by means of light sensing optics.
LINEAR INTERPOLA nON - A function of a control whereby data points are gen-
erated between given coordinate positions to allow simultaneous movement of two or
more axes of motion in a linear (straight line) path.
LINE PRINTER - A printing device that can print an entire line of characters all at
once.
LINKAGE - A means of communicating information from one routine to another.
LOCKOUT SWITCH - A switch provided with a memory, which protects the con-
tents of designated segments from alteration.
LOG - A detailed record of actions for a period of time.
LOG OFF - The completion of a terminal session.
LOG ON - The beginning of a terminal session.
LOGIC - 1. Electronic devices used to govern a particular sequence of operations in
a given system. 2. Interrelation or sequence of facts or events when seen as inevitable
or predictable.
LOGIC LEVEL - The voltage magnitude associated with signal pulses representing
ONES and ZEROS in binary computation.
LOOP TAPE - A short piece of tape, containing a complete program of operation,
with the ends joined.
LSI - Large Scale Integration :- A large number of interconnected integrated circuits
manufactured simultaneously on a single slice of semi-conductor material.
www.EngineeringBooksPdf.com
Glossary of Terms 155
M
MACHINE LANGUAGE - A language written in a series of bits which are under-
standable by, and therefore instruct, a computer. The "first level" computer language,
as compared to a "second level" assembly language or a "third level" compiler
language.
MACHINE PROGRAM - An ordered set of instructions in automatic control lan-
guage and format recorded on appropriate input media and sufficiently complete to
effect the direct operation of an automatic control system.
MACHINING CENTRE - A machine tool, usually numerically controlled, capable of
automatically drilling, reaming, tapping, milling and boring multiple faces of a part
and often equipped with a system for automatically changing cutting tools.
MACRO - A source language instruction from which many machine language in-
structions can be generated (see compiler language).
MAGNETIC CORE - An element for switching or storing information on magnetic
memory elements for later use by a computer.
MAGNETIC CORE STORAGE - The process of storing information on magnet
memory elements for later use by a computer.
MAGNETIC DISK STORAGE - A storage device or system consisting of magne-
tically coated metal disks.
MAINFRAME - See central processing unit.
MANAGEMENT INFORMATION SERVICE (MIS) - An information feedback
system from the machine to management and implemented by a computer.
MANUAL DATA INPUT (MDI) - A means of inserting data manually into the
control system.
MANUAL FEEDRATE OVERRIDE - Device enabling operator to reduce or increase
the feedrate.
MANUAL PART PROGRAMMING - The manual preparation of a manuscript in
machine control language and format to define a sequence of commands for use on an
NC machine.
MANUSCRIPT - Form used by a part programmer for listing detailed manual or
computer part programming instructions.
MEMORY - A device or media used to store information in a form that can be
understood by the computer hardware.
MEMORY, BULK - Any non-programmable large memory, i.e., drum, disk.
MEMORY CYCLE TIME - The minimum time between two successive data accesses
from a memory.
MEMORY PROTECT - A technique of protecting stored data from alteration, using a
guard bit to inhibit the execution of any modification instruction.
MICROPROCESSOR - A single integrated circuit which forms the basic element of a
computer.
MICROPROGRAMMING - A programming technique in which multiple instruction
operations can be combined for greater speed and more efficient memory use.
MICROSECOND - One millionth of a second.
MILLISECOND - One thousandth of a second.
MISCELLANEOUS FUNCTION - An off-on function of a machine such as Clamp or
Coolant on. (See Auxiliary Function).
MNEMONIC - An alphanumeric designation, designed to aid in remembering a
memory location or computer operation.
www.EngineeringBooksPdf.com
156 Glossary of Terms
MODEM - A contraction of modulator demodulator. The term may be used with two
different meanings: 1. The modulator and the demodulator of a modem are associated
at the same end of a circuit. 2. The modulator and the demodulator of a modem are
associated at the opposite ends of a circuit to form a channel.
MODULE - An independent unit which may be used on its own or in conjunction
with other units to form a complete entity.
MONITOR - A device used for observing or testing the operations of a system.
MOVABLE HEADS - Reading and writing transducers on bulk memory devices
which can be positioned over the data locations.
MSI - Medium Scale Integration. (See LSI.) Smaller than LSI, but having at least 12
gates or basic circuits with at least 100 circuit elements.
MULTIPLEXER - A hardware device which handles multiple signals over a single
channel.
N
NAND - A combination of the Boolean logic functions NOT and AND.
NAND GATE - A component which implements the NAND function.
NANOSECOND - One thousandth of one microsecond.
NEGATIVE LOGIC - Logic in which the more negative voltage represents the one (1)
state; the less negative voltage represents the zero (0) state.
NIXIE LIGHT OR TUBE - A glow lamp which converts a combination of electrical
impulses into a visible number.
NOISE - An extraneous signal in an electrical circuit capable of interfering with the
desired signal. Loosely, any disturbance tending to interfere with the normal oper-
ation of a device or system.
NOR GATE - A component which implements the NOR function.
NOT - A logic operator having property that if P is a logic quantity then quantity
"NOT P" assumes values as defined in the following table:
P NOTP
o 1
1 0
o
OBJECT PROGRAM - The coded output of an assembler or compiler.
OCTAL - A characteristic of a system in which there are eight elements, such as a
numbering system with a radix of eight.
OFF-LINE - Operating software or hardware not under the direct control of a central
processor, or operations performed while a computer is not monitoring or controlling
processes or equipment.
OFFSET - The steady-state deviation of the controlled variable from a fixed setpoint.
www.EngineeringBooksPdf.com
Glossary of Terms 157
P Q PORQ
o o o
o 1 1
1 o 1
1 1 1
P
PARABOLA - A plane curve generated by a point moving so that its distance from a
fixed second point is equal to its distance from a fixed line.
PARABOLIC INTERPOLATION - Control of cutter path by interpolation between
three (3) fixed points by assuming the intermediate points are on a parabola.
PARALLEL - The simultaneous transfer and processing of all bits in a unit of
information.
www.EngineeringBooksPdf.com
158 Glossary of Terms
www.EngineeringBooksPdf.com
Glossary of Terms 159
Q
QUADRANT - Any of the four parts into which a plane is divided by rectangular
coordinate axes lying in that plane.
QUADRATURE - Displaced 90 degrees in phase angle.
R
R DIMENSION - (See Feed Engage Point).
RANDOM ACCESS MEMORY (RAM) - A storage unit in which direct access is
provided to information, independent of memory location.
RASTER DISPLAY - A display in which the entire display surface is scanned at a
constant refresh rate.
RASTER SCAN - Line-by-line sweep across the entire display surface to generate
elements of a display image.
READ - To acquire data from a source. To copy, usually from one form of storage to
another, particularly from external or secondary storage to internal storage. To sense
the meaning of arrangements of hardware. To sense the presence of information on a
recording medium.
www.EngineeringBooksPdf.com
160 Glossary of Terms
S
SAMPLE AND HOLD - A circuit used to increase the interval during which a
sampled signal is available, by maintaining an output equal to the most recent input
sample.
SAMPLES DATA - Data in which the information content can be, or is, ascertained
only at discrete intervals of time. (Can be analog or digital.)
www.EngineeringBooksPdf.com
Glossary of Terms 161
www.EngineeringBooksPdf.com
162 Glossary of Terms
T
TABLET - An input device which allows digitised coordinates to be indicated by
stylus position.
TACHOMETER - A speed measuring instrument generally used to determine revo-
lutions per minute. In NC it is used as a velocity feedback device.
TAPE - A magnetic or perforated paper medium for storing information.
TAPE LEADER - The front or lead portion of a tape.
TAPE PREPARATION - The act of translating command information into punched or
magnetic tape.
TAPE TRAILER - The trailing end portion of a tape.
TASK - A unit of work.
TEACH (Robots) - The mode by which a robot is driven to required points in space
for programming.
www.EngineeringBooksPdf.com
Glossary of Terms 163
v
VARIABLE (Robots) - An ability to count events.
VARIABLE BLOCK FORMAT - Tape format which allows the number of words in
successive blocks to vary.
www.EngineeringBooksPdf.com
164 Glossary of Terms
VECTOR - A quantity that has magnitude, direction and sense and that is commonly
represented by a directed line segment whose length represents the magnitude and
whose orientation in space represents the direction.
VECTOR FEED RATE - The resultant feed rate which a cutter or tool moves with
respect to the work surface. The individual slides may move slower or faster than the
programmed rate; but the resultant movement is equal to the programmed rate.
VOLATILE STORAGE - A memory in which data can only be retained while power
is being applied.
W
WINDUP - Lost motion in a mechanical system which is proportional to the force or
torque applied.
WIRE-FRAME - A 3-dimensional drawing created by the projection of the points of
intersection of the geometry.
WORD ADDRESS FORMAT - Addressing each word in a block by one or more
characters which identify the meaning of the word.
WORD LENGTH - The number of bits or characters in a word.
WORLD COORDINATES (Robots) - The coordinate system by which a point
in space is defined in three cartesian coordinates and three orientation or polar
coord ina tes.
WRIST (Robots) - The element of a robot which applies orientation to a tool.
x
X AXIS - Axis of motion that is always horizontal and parallel to the work-holding
surface.
Y
Y AXIS -- Axis of motion that is perpendicular to both the X and Z axes.
YAW (Robots) - A rotation of a payload or tool about a vertical axis that is perpendi-
cular to the pitch axis of the wrist.
Z
Z AXIS - Axis of motion that is always parallel to the principal spindle of the
machine.
ZERO - One of the two symbols normally employed in binary arithmetic and logic,
indicating the value zero and the false condition, respectively.
ZERO OFFSET - A characteristic of a numerical machine tool control permitting the
zero point on an axis to be shifted readily over a specified range. (The control retains
information on the location of the "permanent" zero.)
ZERO SHIFT - A characteristic of a numerical machine tool control permitting the
zero point on an axis to be shifted readily over a specified range. (The control does not
retain information on the location of the "permanent" zero.)
ZERO SUPPRESSION - The elimination of non-significant zeros to the left of signi-
ficant digits usually before printing.
ZERO SYNCHRONISATION - A technique which permits automatic recovery of a
precise position after the machine axis has been approximately positioned by manual
control.
www.EngineeringBooksPdf.com
Selected Bibliography
Books
1. Aleksander, Designing intelligent systems - an introduction. Kogan Page, 1984. ISBN 0-85038-860-0.
ASM International, High speed machining - solutions for productivity. 1990. ISBN 0-87170-367-X.
B.G. Batchelor, D.A. Hill, D.C. Hodgson, Automated visual inspection. IFS, 1985. ISBN 0-903608-68-51.
D. Bennett, Production systems design. Butterworth, 1986. ISBN 0-408-01546-2.
C.W. Besant, C.W. Lui, Computer-aided design and manufacture. Ellis Horwood, 1986. ISBN 0-85312-
909-6.
J. Cullen, J. Hollingum, Implementing total quality. IFS/Springer-Verlag, 1987. ISBN 0-948507-65-9.
D. Gibbs, An introduction to CNC machining. Cassell, 1987. ISBN 0-304-31412-9.
D. Gibbs, CNC part programming: a practical guide. Cassell, 1987. ISBN 0-304-31355-6.
D.L. Goetsch, Advanced manufacturing technology. Delmar, 1990. ISBN 0-8273-3786-8.
M.J. Haigh, An introduction to computer-aided design and manufacture. Blackwell, 1985. ISBN 0-632-
01242-0.
J. Hartley, FMS at work. IFS, 1984. ISBN 0-903608-62-6.
J. Howlett, Tools of total quality. Chapman & Hall, 1991. ISBN 0-412-37690-3.
H.B. Kief, Flexible automation. Becker, 1986. ISBN 0-951201O-0-X.
A. Kochan, D. Cowan, Implementing CIM. IFS/Springer-VerJag, 1986. ISBN 0-948507-20-9.
B. Leatham-Jones, Introduction to computer numerical control. Pitman, 1986. ISBN 0-273-02402-7.
D.K. Macbeth, Advanced manufacturing - strategy and management. IFS/Springer-VerJag, 1989. ISBN
1-85423-039-5.
A.J. Medland, P. Burnett, CADCAM in practice. Kogan Page, 1986. ISBN 0-85038-817-l.
A.J. Medland, G. Mullineux, Principles of CAD - a coursebook. Kogan Page, 1988. ISBN 1-85091-534-2.
J.S. Oakland, Statistical process control- a practical guide. Heinemann, 1986. ISBN 0-434-91475-4.
D. Parrish, Flexible manufacturing. Butterworth-Heinemann, 1990. ISBN 0-7506-10115.
J. Pusztai, M. Sava, Computer numerical control. Reston, 1983. ISBN 0-8359-0924-7.
P.G. Ranky, The design and operation of FMS. IFS, 1983. ISBN 0-903608-44-8.
W.S. Robertson, Lubrication in practice. Macmillan, 1987. ISBN 0-333-34978-4.
W.S. Seames, Computer numerical control: concepts and programming. Delmar, 1990. ISBN 0-8273-
3782-5.
G.T. Smith, Advanced machining - the handbook of cutting technology. IFS/Springer-VerJag, 1989. ISBN
1-085423-022-0.
K.J. Stout, Quality control in automation. Kogan Page, 1985. ISBN 0-85038-936-4.
G.E. Thyer, Computer numerical control of machine tools. Heinemann, 1988. ISBN 0-434-91959-4.
J. Woodwark, Computing shape. Butterworths, 1986. ISBN 0-408-01402-4.
www.EngineeringBooksPdf.com
166 Selected Bibliography
www.EngineeringBooksPdf.com
Company Addresses
www.EngineeringBooksPdf.com
168 Company Addresses
www.EngineeringBooksPdf.com
Company Addresses 169
Federal-Mogul
Westwind Air Bearings Ltd
Trading Park
Holton Heath
Poole
Dorset
BH166LN
Tel: 0202 622565
www.EngineeringBooksPdf.com
170 Company Addresses
Hahn & Kolb (GB) Ltd Hahn & Kolb GmbH & Co
6 Forum Drive Bei Angabe Oes
Leicester Road Postfach 106018
Rugby W-7000
Warks Stuttgart 10
CV211NY Germany
Tel: 0788 577288 Tel: 49 711 945-0
AT & T Istel
Industrial Systems Ltd
Highfield House
Headless Cross Drive
Redditch
Worcs
B975EG
Tel: 0527 550330
www.EngineeringBooksPdf.com
Company Addresses 171
NC Engineering Ltd
1 Park Avenue,
Bushey
Watford
Herts
WD22DG
Tel: 0923 243962
www.EngineeringBooksPdf.com
172 Company Addresses
www.EngineeringBooksPdf.com
Company Addresses 173
www.EngineeringBooksPdf.com
Index
www.EngineeringBooksPdf.com
176 Index
www.EngineeringBooksPdf.com
Index 177
www.EngineeringBooksPdf.com
178 Index
www.EngineeringBooksPdf.com