Professional Documents
Culture Documents
Installation
1. Install diaghead.exe <if your os is xp, you need install .net framework 2.0 software>
2. Vmware-player-2.5.0-118166_pconline
3. Copy inpa all file to c:\.
4. Copy gt1 software to c:\. And unzip it.
5. Edit system path, add <c:\ediabas\bin\> path(syspath.jpg)
6. Connect usb cable and instal ftdi drivers.
7. Install d-can usb device(usb2.0 ftdi driver.rar)
8. Record your com port number (number.jpg) <if com port larger than com4, you need
change com port to com2 or com1 or other>
9. Setup "latensy timer = 1" (l_timer.jpg)
(
10. Set c:\ediabas\hardware\obd\obd.ini port=comx your usb-com port number )
11. Run c:\ediabas\hardware\obd\obdsetup.exe
12. Restart windows
13. Change main network adapter ip to 192.168.68.1,please don’t change vmware
network adapter ip
14. Change to c:\ediabas\bin\ediabas.ini port= 6801, if needed.
Operations
Inpa
Run c:\inpa\bin\inpa.exe
<first time run gt1,you need do this,gt1 will need find & steup d-can interface>
Click <administration> button(in gt1 software main screen)
Click <connection setup> button
Click <connecting> button
Click <menu>-><end>--<quit> buttion (to back to main screen)
To work correctly with the device, in vmplayer set ethernet1, ethernet2, ethernet3 to
"connected", "bridged". Master pc network settings must be the following:
- Ip 192.168.68.1
- Subnet mask 255.255.255.0
- Gateway 192.168.68.1
-
Notes:
If notebook not connect network cables, please insert loopback cables,
If you insert look back cables, maybe not can activati, you need re-activate the
network adapter or reset pc
Please don’t change ethernet2, ethernet3 ip address
You need close your firewall software, if you not close firewall , gt1 will not can
connect you d-can interface
Don't use usb extender cable, directly connect interface to computer.