Professional Documents
Culture Documents
Coriant Hit 7300 Environmental Product Declaration (Epd) : Issue: 3 Issue Date: June 2015 S42022-L5048-A540-03-7662
Coriant Hit 7300 Environmental Product Declaration (Epd) : Issue: 3 Issue Date: June 2015 S42022-L5048-A540-03-7662
5.40 50
Coriant hiT 7300
Environmental Product Declaration
(EPD)
S42022-L5048-A540-03-7662
The information in this document is subject to change without notice and describes only the product
defined in the introduction of this documentation. This documentation is intended for the use of
Coriant customers only for the purposes of the agreement under which the document is submitted,
and no part of it may be used, reproduced, modified or transmitted in any form or means without the
prior written permission of Coriant. The documentation has been prepared to be used by professional
and properly trained personnel, and the customer assumes full responsibility when using it. Coriant
welcomes customer comments as part of the process of continuous development and improvement of
the documentation.
The information or statements given in this documentation concerning the suitability, capacity, or
performance of the mentioned hardware or software products are given "as is" and all liability arising
in connection with such hardware or software products shall be defined conclusively and finally in a
separate agreement between Coriant and the customer. However, Coriant has made all reasonable
efforts to ensure that the instructions contained in the document are adequate and free of material
errors and omissions. Coriant will, if deemed necessary by Coriant, explain issues which may not be
covered by the document. Coriant will correct errors in this documentation as soon as possible.
IN NO EVENT WILL CORIANT BE LIABLE FOR ERRORS IN THIS DOCUMENTATION OR FOR
ANY DAMAGES, INCLUDING BUT NOT LIMITED TO SPECIAL, DIRECT, INDIRECT, INCIDENTAL
OR CONSEQUENTIAL OR ANY LOSSES, SUCH AS BUT NOT LIMITED TO LOSS OF PROFIT,
REVENUE, BUSINESS INTERRUPTION, BUSINESS OPPORTUNITY OR DATA,THAT MAY ARISE
FROM THE USE OF THIS DOCUMENT OR THE INFORMATION IN IT.
This documentation and the product it describes are considered protected by copyrights and other
intellectual property rights according to the applicable laws. Other product names mentioned in this
document may be trademarks of their respective owners, and they are mentioned for identification
purposes only.
Copyright © Coriant 2015. All rights reserved.
Table of Contents
This document has 44 pages.
1 Introduction ........................................................................................................6
History of changes
Issue Issue date Remarks
1 August 2014 Release 5.40 00
2 January 2015 Release 5.40 50
3 June 2015 Release 5.40 50 Maintenance
1 Introduction
The purpose of this document is to provide environmentally relevant
information of Coriant hiT 7300 5.40 50 (hereinafter referred to as hiT 7300
5.40).
This document shall not be interpreted as a specification, modification or
amendment to the specification, or additional or other warranty of any kind. In
case of discrepancy between this document and the product specification or
terms and conditions of the valid supply agreement between Coriant and the
customer, the supply agreement and product specification shall always prevail
over this document.
2 Product description
Type of the product
S42022-L5048-A540-03-7662
7/44 © Coriant Issue: 3 Issue date: June 2015
Environmental Product Declaration (EPD) Company environmental information
S42022-L5048-A540-03-7662
9/44 © Coriant Issue: 3 Issue date: June 2015
Environmental Product Declaration (EPD) Company environmental information
S42022-L5048-A540-03-7662
11/44 © Coriant Issue: 3 Issue date: June 2015
Environmental Product Declaration (EPD) Company environmental information
EER [Mbps/W]
Figure 1 Energy Efficiency Ratio [Mbps/W]: 100-G compared with 40-G and 10-G
S42022-L5048-A540-03-7662
13/44 © Coriant Issue: 3 Issue date: June 2015
Environmental Product Declaration (EPD) Environmental benefits of hiT 7300
Figure 2 Mass Efficiency Ratio [Mbps/kg]: 100-G compared with 40-G and 10-G
Figure 3 Footprint Efficiency Ratio [Mbps/m²]: 100-G compared with 40-G and 10-G
S42022-L5048-A540-03-7662
15/44 © Coriant Issue: 3 Issue date: June 2015
Environmental Product Declaration (EPD) Product environmental information
S42022-L5048-A540-03-7662
19/44 © Coriant Issue: 3 Issue date: June 2015
Environmental Product Declaration (EPD) Product environmental information
S42022-L5048-A540-03-7662
21/44 © Coriant Issue: 3 Issue date: June 2015
Environmental Product Declaration (EPD) Product environmental information
Unit Data
Product energy consumption [kW] Refer to section
(typical) 4.1
S42022-L5048-A540-03-7662
23/44 © Coriant Issue: 3 Issue date: June 2015
Environmental Product Declaration (EPD) Product environmental information
5.3 Materials
(Item)
铅 汞 镉 六价铬 多溴联苯 多溴二苯醚
金属部件 x o o o o o
(Metal Parts)
(Item)
铅 汞 镉 六价铬 多溴联苯 多溴二苯醚
电路模块 x o x o o o
(Circuit Modules)
电缆及电缆组件 x o x o o o
(Cables & Cable
Assemblies)
塑料和聚合物部件 o o o o o o
(Plastic and Polymeric
parts)
对销售之日的所售产品.本表显示. 诺基亚西门子网络供应链的电子信息产品可
能包含这些物质。注意:在所售产品中可能会也可能不会含有所有所列的部件。
This table shows where these substances may be found in the supply chain of
Coriant’ electronic information products, as of the date of sale of the enclosed
product. Note that some of the component types listed above may or may not
be a part of the enclosed product.
o: 表示该有毒有害物质在 该部件所有均质材料中的含量均在SJ/T 11363-2006
标准规定的限量要求以下。
o: Indicates that the concentration of the hazardous substance in all
homogeneous materials in the parts is below the relevant threshold of the
SJ/T 11363-2006 standard.
x: 表示该有毒有害物质至少在该部件的某一均质材料中的含量超出SJ/T 11363-2006
标准规定的限量要求。
x: Indicates that the concentration of the hazardous substance of at least one
of all homogeneous materials in the parts is above the relevant threshold of
the SJ/T 11363-2006 standard.
标注“X”的原因是:现阶段没有可供选择的替代技术或部件。
The reason for marking with “X” is: There are not alternative technologies or
parts available.
S42022-L5048-A540-03-7662
25/44 © Coriant Issue: 3 Issue date: June 2015
Environmental Product Declaration (EPD) Product environmental information
The main fractions of the Product are listed in the table below. This table is
not inclusive and the product may contain other materials, substances,
components or parts than those identified in this document.
Fraction / Material
[g]
Copper-Beryllium
Thermoplastics
Aluminum
Mixed
Steel
Total
FR-4
Fraction / Material
[g]
Copper-Beryllium
Thermoplastics
Aluminum
Mixed
Steel
Total
FR-4
CFSU-2 0 171 255 232 17 2 676
CPFLAC-1 294 171 255 2112 57 2 2891
CPFLDC-1 0 171 51 60 17 2 300
CRCB-1 150 54 77 153 45 2 480
CTIF-1 0 171 255 416 57 2 900
DxxxxDCF-2 273 330 255 1593 117 2 2570
DxxxxLEF-1 273 330 255 833 117 2 1810
DxxxxLFF-1 273 330 255 1713 117 2 2690
DxxxxNRF-1 273 330 255 703 117 2 1680
DxxxxPCF-1 273 330 255 1608 117 2 2585
DxxxxSMF-1 273 330 255 123 117 2 1100
DxxxxSMF-2 273 169 255 447 75 2 1221
F02MR-1 273 166 255 994 111 2 1800
F04ADR08-1/F 190 150 244 939 55 2 1580
F04MCR96-1/F 273 163 255 761 146 2 1600
F04MDN-1 273 163 255 91 146 2 930
F04MDU-1 273 163 255 176 146 2 1015
F08MR-1 273 318 255 1992 261 2 3100
F08SB-1 273 163 255 161 146 2 1000
F09DR80-1 567 518 255 2641 160 2 4143
F09MCR96-1 273 308 255 1819 143 2 2800
F09MDR96-1 273 635 255 3716 220 2 5100
F09MDR96-2/F 190 150 244 939 55 2 1580
F09MDRT-1/O 567 512 255 2481 171 2 3988
F09MDRT-1/S 567 512 255 2481 171 2 3988
F09MR80-1 567 517 255 2485 163 2 3988
F16CCR08-1/A 273 615 255 5020 255 2 6420
F16SB-1 273 168 255 160 93 2 950
F20MDR96-1 273 617 255 761 92 2 2000
F20MDR96-2/F 273 617 255 761 92 2 2000
F40-1 567 333 255 333 161 2 1651
F40MR-1 574 513 510 375 226 2 2200
F40V-1 273 298 255 1155 161 2 2144
F48MDP-1 273 574 255 2291 226 2 3620
F48MDV-1 273 574 255 2571 226 2 3900
F80DCI-1 273 168 255 245 93 2 1035
F80MDI-1 273 165 255 416 128 2 1238
S42022-L5048-A540-03-7662
27/44 © Coriant Issue: 3 Issue date: June 2015
Environmental Product Declaration (EPD) Product environmental information
Fraction / Material
[g]
Copper-Beryllium
Thermoplastics
Aluminum
Mixed
Steel
Total
FR-4
Filler Panel 0 161 0 0 33 2 195
I01R40G-1/DP 273 340 510 1736 131 2 2992
I01R40G-1/DPS 273 340 510 1588 131 2 2844
I01T100G-1/CQP 273 340 510 1544 131 2 2800
I01T100G-1/CQPLL 273 340 510 1544 131 2 2800
I01T100G-1/CQPS 273 340 510 1344 131 2 2600
I01T100G-2/CQP 273 340 510 1544 131 2 2800
I01T100G-2/CQPS 273 340 510 1544 131 2 2800
I01T10G-1 280 181 255 802 78 2 1597
I01T10G-1/LHD2S 574 216 255 473 78 2 1597
I01T10G-1/LHDS 574 216 255 473 78 2 1597
I01T10G-1/LHS 574 216 255 473 78 2 1597
I01T40G-1/DP-I 273 339 510 1576 149 2 2849
I01T40G-1/DPS-I 273 339 510 1576 149 2 2849
I01T40G-2/CQP-CFP 273 339 510 1527 149 2 2800
I01T40G-2/CQP-I 273 339 510 827 149 2 2100
I02R40G-2/CQP 273 339 510 1360 149 2 2633
I04T100G-2/CQP 581 740 510 1082 85 2 3000
I04T100G-2/F 581 740 510 1082 85 2 3000
I04T2G5-1 315 243 255 108 74 2 997
I04T40G-1/DP 301 390 510 1516 125 2 2844
I04T40G-1/DPS 301 390 510 1516 125 2 2844
I04T40G-2/CQP 301 389 510 889 143 2 2233
I04T40G-2/CQPS 301 389 510 889 143 2 2233
I04TQ10G-1 329 267 255 154 80 2 1086
I05AD10G-1 322 255 255 129 77 2 1039
I08AD10G-1 322 255 255 210 77 2 1120
I08T10G-1 301 379 255 1635 129 2 2700
I08T10G-1/LHD2S 329 427 255 1548 140 2 2700
I08T10G-1/LHDS 329 427 255 1548 140 2 2700
I08T10G-1/LHS 329 427 255 1548 140 2 2700
I10T100G-1/CQP 343 461 510 1225 160 2 2700
I10T100G-1/CQPLL 343 461 510 1225 160 2 2700
I10T100G-1/CQPS 343 461 510 1225 160 2 2700
I10T100G-2/CQP 343 461 510 1225 160 2 2700
I10T100G-2/CQPS 343 461 510 1225 160 2 2700
I22CE10G-1 427 597 255 518 162 2 1960
Fraction / Material
[g]
Copper-Beryllium
Thermoplastics
Aluminum
Mixed
Steel
Total
FR-4
LABBC-1 567 362 255 1211 153 2 2550
LABBC-1/DCM 567 362 255 1211 153 2 2550
LABIC-1 567 362 255 1211 153 2 2550
LABIC-1/DCM 567 362 255 1211 153 2 2550
LABIC-1/H 567 362 255 1211 153 2 2550
LABPC-1 567 364 255 1227 135 2 2550
LALBC-1 567 362 255 661 153 2 2000
LALBCH-1 567 362 255 661 153 2 2000
LALIC-1 567 362 255 661 153 2 2000
LALPC-1 567 362 255 661 153 2 2000
LAMIC-1 273 166 255 416 111 2 1222
LAMIC-2/DCM 273 166 255 416 111 2 1222
LAMICH-2/DCM 273 166 255 416 111 2 1222
LAMPBC-1/DCM 273 166 255 1194 111 2 2000
LAMPC-1 273 166 255 503 111 2 1309
LASBC-1 273 168 255 417 93 2 1207
LASIC-2 273 168 255 432 93 2 1222
LASIC-2/LP 273 168 255 432 93 2 1222
LAVBC-1 567 362 255 830 153 2 2169
LAVBCH-1 567 362 255 830 153 2 2169
LAVIC-1 567 362 255 830 153 2 2169
LIFB-1 273 168 255 194 93 2 984
MCP404-1 273 165 255 271 128 2 1093
MCP404-2 273 165 255 271 128 2 1093
MCP4-1 273 165 255 271 128 2 1093
MCP4-2 273 165 255 278 128 2 1100
MCP4-2/F 273 165 255 278 128 2 1100
O02CSP-1 273 161 255 145 164 2 1000
O02CSP-2 273 161 255 145 164 2 1000
O02CSP-3 273 161 255 145 164 2 1000
O02CT-1 273 161 255 145 164 2 1000
O03CP-1 273 157 255 196 218 2 1100
O08VA-1 273 158 255 112 200 2 1000
O09CC-1 273 316 255 226 209 2 1280
O09CC-2 273 316 255 226 209 2 1280
O24CC-1/A 273 316 255 446 209 2 1500
OTLC-1 273 169 255 1576 75 2 2350
S42022-L5048-A540-03-7662
29/44 © Coriant Issue: 3 Issue date: June 2015
Environmental Product Declaration (EPD) Product environmental information
Fraction / Material
[g]
Copper-Beryllium
Thermoplastics
Aluminum
Mixed
Steel
Total
FR-4
OTSC-1 273 169 255 1576 75 2 2350
PL-1 273 171 255 243 57 2 1000
PRC-1 567 364 255 1517 135 2 2840
PRC-1/96 567 364 255 1517 135 2 2840
PRC-2 567 364 255 1517 135 2 2840
PRC-3/FB 567 364 255 877 135 2 2200
Table 15 List of main material fractions per module
Copper-Beryllium
Thermoplastics
Aluminum
Mixed
Steel
Total
FR-4
Fraction / Material
[g]
Copper-Beryllium
Thermoplastics
Aluminum
Mixed
Steel
Total
FR-4
SRS19-3 9848 0 235 1030 216 2 11331
(without CFS-3,4)
SRS19-3 Fan Cover 0 350 0 0 0 0 350
SRS19-3 Front Cover 0 850 0 0 0 0 850
SRS19-3 Mounting Kit 640 0 0 0 0 0 640
SFL-1 2798 525 70 390 211,5 1,5 3996
(without CFFL-1)
SFL-1 Front Cover 0 525 0 0 0 0 525
SFL-1 Mounting Set 225 0 0 0 0 0 225
SFS-1 2470 290 0 16 14 0 2790
SFS-1 Filler Panel 0 86 0 2 4 0 92
SFS-1 Mounting Set 295 0 0 0 0 0 295
SPF-1 1054 0 0 10 40 0 1104
CTDP-1 400 0 100 300 6 0 806
Table 16 List of main material fractions per shelf
Beryllium
Copper-
Mixed
Steel
Total
FR-4
S42022-L5048-A540-03-7662
31/44 © Coriant Issue: 3 Issue date: June 2015
Environmental Product Declaration (EPD) Product environmental information
Thermoplastics
Aluminum
Beryllium
Copper-
Mixed
Steel
Total
FR-4
F04MDUP-1 0 0 0 1015 0 0 1015
F40MDS-1 0 0 0 1651 0 0 1651
F48MDS-1 0 0 0 1500 0 0 1500
FC01MDUP-1 1054 0 0 10 40 0 1104
FC01U-1 1054 0 0 10 40 0 1104
FC02SBP-1 1054 0 0 10 40 0 1104
FC04MDP-1 1500 0 0 193 46 0 1739
FC04MDUP-1 1500 0 0 193 46 0 1739
FCDI-1 989 0 0 0 46 0 1035
Table 18 List of main material fractions per Filter
Thermoplastics
Aluminum
Beryllium
Copper-
Mixed
Steel
Total
FR-4
Beryllium
Copper-
Mixed
Steel
Total
FR-4
Fraction / Material
[g]
Thermoplastics
Aluminum
Beryllium
Copper-
Mixed
Steel
Total
FR-4
SFP CWDM GbE / OTU1 0 0 0 20 0 0 20
SFP DWDM enhanced 0 0 0 20 0 0 20
SFP DWDM std. 0 0 0 20 0 0 20
SFP FC2 200 0 0 0 30 0 0 30
SFP FC4 400 0 0 0 100 0 0 100
SFP GbE 0 0 0 35 0 0 35
SFP OTU/SDH 0 0 0 30 0 0 30
SFP S-1.1 0 0 0 30 0 0 30
SFP S-4.1 0 0 0 30 0 0 30
SFP SMPTE 0 0 0 18 0 0 18
SFP STM-1 electr. 0 0 0 30 0 0 30
SFP+ FC 0 0 0 18 0 0 18
XFP 10G C-band tunable 0 0 0 18 0 0 18
XFP 10GbE 0 0 0 115 0 0 115
XFP CWDM 70km 0 0 0 18 0 0 18
XFP DWDM 40km 0 0 0 18 0 0 18
XFP DWDM metro 0 0 0 20 0 0 20
XFP DWDM regio 0 0 0 20 0 0 20
XFP FC8 0 0 0 18 0 0 18
Table 20 List of main material fractions per pluggable
Mixed
Steel
Total
FR-4
S42022-L5048-A540-03-7662
33/44 © Coriant Issue: 3 Issue date: June 2015
Environmental Product Declaration (EPD) Product environmental information
Fraction / Material
[g]
Copper-Beryllium
Thermoplastics
Aluminum
Mixed
Steel
Total
FR-4
DC Power Cable AWG10
0 0 0 1680 0 0 1680
[per Shelf]
DC Power Cable AWG8
0 0 0 1700 0 0 1700
[per Shelf]
EOW Cable [per m] 0 0 0 72 0 0 72
TIF Cable [per m] 0 0 0 185 0 0 185
FO-Patchcord [3m] 0 0 0 30 0 0 30
FO-Patchcord [6m] 0 0 0 60 0 0 60
FO-Patchcord [10m] 0 0 0 100 0 0 100
LC-PC Attenuator Plug-In 0 0 0 6 0 0 6
Table 21 List of main material fractions per Cable
Copper-Beryllium
Thermoplastics
Aluminum
Mixed
Steel
Total
FR-4
Copper-Beryllium
Thermoplastics
Aluminum
Mixed
Steel
Total
FR-4
ON ETSI Rack 37200 0 0 0 0 0 37200
ON ETSI Rack - EQ 67800 0 0 0 0 0 67800
Fiber Tray ANSI (incl.
954 184 0 0 92 0 1230
Cover)
Fiber Tray ETSI (incl.
954 184 0 0 92 0 1230
Cover)
Table 23 List of main material fractions per Rack and Rack Assembly
S42022-L5048-A540-03-7662
35/44 © Coriant Issue: 3 Issue date: June 2015
Environmental Product Declaration (EPD) Product environmental information
Chlorofluorocarbons (CFC). X
hydrochlorofluorocarbons (HCFC) or
hydrofluorocarbons (HFC).
hydrocarbons (HC)
Gas discharge lamps X
Liquid crystal displays of a surface X
greater than 100 cm². and all those
back-lighted with gas discharge lamps
External electric cables X Power Cable;
Ethernet Cable;
TIF. EOW. Alarm
Cable
Components containing refractory X
ceramic fibres
Components containing radioactive X
substances
Electrolyte capacitors (with a height >
25 mm. a diameter > 25 mm or
proportionately similar volume)
Beryllium Oxide X
Beryllium compounds X Copper Beryllium
(tin-plated) at the
face plate
Pressure X
Liquids X
Gases X
“Hidden“ mechanical springs or other X Spring contacts
equivalent used in connectors
Table 24 List of materials, substances, components and parts which may require
special handling at end-of- life
Following picture presents the location of EMC Spring which contains Copper
Beryllium (tin-plated):
n.a.
S42022-L5048-A540-03-7662
37/44 © Coriant Issue: 3 Issue date: June 2015
Environmental Product Declaration (EPD) Product environmental information
Total
715.235 84.59 605.011 100.00
(depending on share)
5.5 Batteries
Batteries used in Coriant products are in conformance with the EU directive
2006/66/EC.
Description / relevant information
The product contains battery / Lithium Battery
accumulator type
The weight and the Weight: 2.8 g
dimensional characteristics of Diameter 20 mm
the battery
Table 26 Batteries used in the product
S42022-L5048-A540-03-7662
39/44 © Coriant Issue: 3 Issue date: June 2015
Environmental Product Declaration (EPD) Product environmental information
S42022-L5048-A540-03-7662
41/44 © Coriant Issue: 3 Issue date: June 2015
Environmental Product Declaration (EPD) Environment related markings
The marking for Environmental Friendly Use Period is applicable only within
People’s Republic of China. The Environmental Friendly Use Period is valid
only if product is used and operated strictly in accordance with the relevant
product manual.
S42022-L5048-A540-03-7662
43/44 © Coriant Issue: 3 Issue date: June 2015
Environmental Product Declaration (EPD) Take-back information
7 Take-back information
Coriant customers can contract with Coriant for environmentally responsible
end-of-life treatment of obsolete equipment. The purpose is to recover the
material and energy content of the obsolete products and to ensure safe
treatment of substances that can cause harm to people or the environment, if
disposed of untreated. In a life-cycle perspective, EoL treatment can
compensate for some of the environmental impacts of the earlier stages of the
product’s life cycle.
Coriant Equipment Take Back Solution provides Coriant customers with an
end-to-end service that includes the removal of end-of-life products from the
customers' network and ensures end-of-life treatment in an environmentally
responsible way. The Coriant Equipment Take Back Solution is offered in
several modules representing end-to-end work flow of the process:
Removal
Collection
Recycling
Project Management
In Coriant or Other Vendor HW Replacement, that is, SWAP cases Take Back
Solution brings in Collection and Recycling Service as Removal and Project
Management are already included. The pricing is scalable according to the
modules.
If customer chooses not to procure Coriant Equipment Take Back Solution
from Coriant, customer agrees to dispose of any such equipment in a sound
environmental manner, in compliance with all applicable laws.