gun aighll all aly yin
ai Ramallah Testing Lab.
Test and be Assured Tana Lil 53 6 sys Ge
LAC-004 1s0 17025
Registered ‘ACCREDITED
CEMENT TESTS REPORT
DATE: 16/06/2020
| Client: poled Og bl ayia lat ASS
| Client Rep: ed al all
SAMPLE INFORMATIO
Sample No: RL-05
Production Date: 01/06/2020 Nesher Cement
| Cement Type: Jehkaoobobaae
jAge at test: 2 Days 7 Days 28 Days
| Casting Date: 06/06/2020 06/06/2020 06/06/2020
[Testing date: 08/06/2020 13/06/2020 04/07/2020
| Sample Size: 40 * 40 * 160 mn
Mushergof [pages Ea) Test results shown in pages (2-3)
No changes are allowed
Ramallah Testing Lab/ Cenent Tests uT-005-20 Page 1 of 3
Ramallah: Al-Bireh- Al-Sharafeh - Anmad Orabi St. getlge am GLE NI Baal a gly
Jericho : Jericho Amman Str. Al Walaji Building petit Bylaws las 2otk: Lagat
Tel: 02 241 3349 - Fax: 02 2413138 - Mob. 059 9252000 / 059 9731373
E-mail: ramallahlab@yahoo.comLAC-004 18017025
Registered ACCREDITED
INTRODUCTION:
Upon to your request dated on 01/06/2020, the material bagged and delivered to our
laboratory by your staff; this report CMT-005-20 is to represent the results of cement
tests.
TESTS CARRIED OUT:
Several tests carried out on cement according to European Standards EN 196 & ASTM Standards:
Compressive Strength according to EN 196-1:2016.
Determination of setting Times and Soundness according to EN 196-3:2016.
Determination of Fineness and Density according to EN 196-6: 2010.
Density of Hydraulic Cement according to ASTM C 188-2017.
RESULTS:
A. COMPRESSION TEST:
1. Preparation of mortar:
Each batch for three test specimens consist of (Cement = 450 + 2g,Sand = 1350+
5g,Water 225 + 1g), then mixing the batch of mortar mechanically using the mixer.
Table 1: Compression Test Results
Reference Stress (MPa) Stress (Pa) Stress (NPa)
Mark 2 Days 7 Days 28 Days
1 26.12 46.08
2 26.47 44, 88
3 26.34 45,85 a
4 26.77 45,80 a
5 26,01 44,59 :
6 26.67 45.11
— 26.40 45.39
MPa
Ramallah Testing Lab/ Cenent TestsLAC-004 1s0 17025,
Registered ACCREDITED
B. SETTING TIME& SOUNDNESS:
Each batch for cement paste consist of (Cement = 500 + 1g, Water 125 + 1g (mayberaised),
then mixing the batch of cement Paste mechanically using the mixer, the consistency recorded,
after that initial and final Setting Times and soundness are recorded.
Table 2: Setting Time & Soundness Results
Reference Consistency Setting Time (Min. ) Soundness
ee 5 Initial Final nn)
28.8 155 198 7
C. FineNEss& DENSITY:
Fineness: is measured the specific surface by observing the time taken for a fixed quantity of
air to flow through a compacted cement bed of specified dimension and porosity.
Table 3: Fineness & Density Results
Reference Fineness Density
Mark (cm?/g) (g/cn*)
4018 06
Table 4: Limits of the Physical Properties of Cement EN 197-1
Compressive Strength (MPa)
Class Initial Setting Soundness
Early Strength Standard Strength
Strength Pay roars 28 Days Time (min) (am)
42.5N 0210 --- 425<0<625 T= 60 S10
52.5 N ao220 somanes ae 52550 T245 Ss10
64 General MANAGER
PALAC ;
Accredited Testing Leb-
LAC.G0
Ramal ab/ Cenent Tests cur-005-20