cui gill cay pita
Ramallah Testing Lab.
sis SLs sly pee
LAC-004 Iso 17025
Registered ACCREDITED
Cenent Tests REPORT _
DATE: 12/07/2020 CMT - 006 - 20
Client: jalal glol ll ie ulall aS 2
Client Rep: cred ol tell
SAMPLE INFORMATION
Sample No: RL-06
Production Date: 10/06/2020 Nesher Cement
4 snonooocrnnEESE
Cement Type
Age at test: 2 Days 7 Days 28 Days
Casting Date: 13/06/2020 13/06/2020 13/06/2020
Testing date: 15/06/2020 20/06/2020 11/07/2020
Sample Size: 40 * 40 * 160 mn?
Husbst{ of: pades tee Test results shown in pages (2-3)
No changes are allowed
GENERAL MANAGER
Ramallah Testing Lab/ Cenent Tests cv-006-20 "Page Lot 3
Ramallah: Al-Bireh- Al-Sharafeh - Ahmad Orabi St. tle dan gLE Wd Baal ah gl
Jericho : Jericho Amman Str. Al Walaji Building wetlgl Bylkes Glee pole: LT
Tel: 02 241 3349 - Fax: 02 2413138 - Mob. 059 9252000 / 059 9731373
E-mail: ramallahlab@yahoo.comLAC-004 1so 17025
Registered ACCREDITED
INTRODUCTION:
Upon to your request dated on 10/06/2020, the material bagged and delivered to our
laboratory by your staff; this report CMT-006-20 is to represent the results of cement
tests.
TESTS CARRIED OUT:
Several tests carried out on cement according to European Standards EN 196 & ASTM Standards:
1. Compressive Strength according to EN 196-1:2016.
2. Determination of setting Times and Soundness according to EN 196-3:2016.
3. Determination of Fineness and Density according to EN 196-6: 2010.
4. Density of Hydraulic Cement according to ASTM C 188-2017.
A. COMPRESSION TEST:
1. Preparation of mortar:
Each batch for three test specimens consist of (Cement = 450+ 2g, Sand = 1350+
5g,Water 225 + 1g), then mixing the batch of mortar mechanically using the mixer.
Table 1: Compression Test Results
Reference Stress (WPa) Stress (WPa) Stress (WPa)
Mark 2 Days 7 Days 28 Days
1 32,00 48.21 64,34
2 31.88 41.13 65.54
3 31.11 48.14 65.72
4 32.53 48.46 64,23
5 31.84 41.39 67.24
6 41.20 65.83
Average 31.81 41,86 65,48
Ramallah Testing Lab/ Cement Tests cur-006-20 Page 2 of 3LAC-004 Iso 17025
Registered ACCREDITED
B. SETTING TIME& SOUNDNESS:
Each batch for cement paste consist of (Cement = 500 + 1g, Water 125 + 1g (mayberaised),
then mixing the batch of cement Paste mechanically using the mixer, the consistency recorded,
after that initial and final Setting Times and soundness are recorded.
Table 2: Setting Time & Soundness Results
Reference Consistency Setting Time (Min.) — Soundness
Mark
Initial Final @)
140 190 0.9
C. FINENESS& DENsITY:
Fineness: is measured the specific surface by observing the time taken for a fixed quantity of
air to flow through a compacted cement bed of specified dimension and porosity.
Table 3: Fineness & Density Results
Reference Fineness Density
Mark (cn?/g) (g/cn')
4086 3.08
Table 4: Limits of the Physical Properties of Cement EN 197-1
Compressive Strength (MPa)
Class ogee ere Initial Setting Soundness
Early Strength Standard Strength
Strength 2 days 7 days 28 Days Time (min) (an)
42.5N 0210 --- 425 50 5625 T260 s<10
52.5N o220 --- 52550 T245 S10
: GENERAL MANAGER
ENG. AKRAM A, MOUSA
PALAC
Accredited Testing Leb.
LAC-04
Testing Lab/ Cement Te ur-006-20