NAT!
pe Current Equipment Type
Max TYPE 12AT7
oy | MINIATURE
ws
ex HIGH SLOPE
} | DOUBLE TRIODE
B9A (Noval) Base
The separate cathode connections and tapped heater features enable the
42AT7 to be used in a variety of applications. As a frequency changer it
will operate at frequencies up to 500 Mc/s.
RATINGS
Heater Voltage 63). g, £126 volts
Heater Current 03 f °F 10.15 amp,
Anode Voltage... . i 300 voles max.
‘Anode Dissipation (each section) 25 wates max.
DiC. Cathode Current (each section) 3. 20 mA, max.
Anode Voltage (zero Anode Current) 2). '550 volts max.
OPERATING CHARACTERISTICS
(Each Section, Class A)
100 180°” 250 voles
Anode Voltage
37 110 10.0 mA
‘Anode Current
Grid Voltage. | ; ; PP voles
Anode impedance 13,500 9.400 10,000 ohms
Mutval Conduceance 16) 66 58.) mAN
‘Amplification Faccor 54628
Gri Voitage Me Se iz voles
(for Anode Current cut-off)
OPERATION AS FREQUENCY CHANGER
OSCILLATOR SECTION
Anode Supply Voltage. - 250 volts
Anode Decoupling Restor. 0 Tod's
GreReier ee SN tofoao’etims
MIXER SECTION
Anode Supply Voltage : ; . 250 volts
‘Anode Decouoling Resistor SL Te00‘ohms
Cathode Bias Restor ; 680 ohms
* Conversion Conductance ; LBS may
{Hetoradyne Voltage {See note)
* Exact value depends on circuit constants and input impedence considerations.
} Heterodyne voltage should be just less than thot required to cause grid current in the mixer
section,
INTER-ELECTRODE CAPACITANCES *
Grid to Grid. 7 fae nee see 0.005 pmax.
Anodeto Anode nse er DOT 04” pF max.
EACH SECTION
toput . 25 oF
Output 4 oF
Grid to Anode «: US pe
Cathode to Heater 28 pF
'* Measured with no external shield.
Type 12A77 is 0 commercial equivalent of the CV455.
a
VALVES PAGE 127
SFNATIT
PA~ ZOVLIOA 300NY, Os WAXIN NO 3OWNOA WOIWTHIOSO WWE
099 __ 095 __oow O92" 601 ° H
y apn ‘wownisgo! |
i
‘ht awe0r woe
BRIMAR
aver 2S)
AN3HUND 3GONV
¥
1
yu PL LN3YUND 3GONV waXIN,
1
o
jor
yur
‘Av! °6 3ONVLINGNOD NOISY3ANOD
NO1L938 HOV3 NV
WAONVHD
“ tvel YVAN Ia AQNINOF W S¥ 3GOMUL BNO,
- LIE ae [
+ CCETT uu
PAGE 128