Professional Documents
Culture Documents
As-P605 2016-03 v2 en c-265wp Poly Black Ijsselenergie PDF
As-P605 2016-03 v2 en c-265wp Poly Black Ijsselenergie PDF
SOLAR
MODULE
POLYCRYSTALLINE CELLS
255 - 265 Wp
SOLAR
255 260 265
MODULE
60 cells per module (156 x 156 mm / 6“)
Tolerance on Nominal Power Pmax**
[V]
-0 / +5
30.50
-0 / +5
30.70
-0 / +5
30.89
holes
800
holes
*Standard Test Conditions (STC): Irradiance 1000 W/m², Air Mass AM = 1.5, Cell Temperature 25°C); Power measurement uncertainty within ± 3%.
** AEG photovoltaic modules are classified according to a principle of positive power tolerance: the Power Output measured at STC of the deli-
Connector
vered modules exceeds their assigned Nameplate Nominal Power at STC within a power tolerance range between -0 Wp and +5 Wp.
952±1(40×30)
© Solar Solutions PV GmbH. Specifications in this datasheet are subject to change without notice. Product code: AS-P605-B6N1-3BB 250-260,
942
version201603.2.EN
MECHANICAL CHARACTERISTICS
Module dimensions are expressed in mm with tolerance ±2 mm (±0.079 “)
Solar Cells 60 (6 x 10) polycrystalline silicon, 156 x 156 mm (6“) solar cells
TEMPERATURE CHARACTERISTICS:
Front Glass 3.2 mm (0.13“) high-transparency low iron tempered glass
Pmax Temp. Coeff. (Ȗ) -0.43 %/°K Encapsulant EVA (Ethylene-Vinyl Acetate)
Voc Temp. Coeff. (ȕ) -0.33 %/°K Frame Anodized aluminum alloy
Isc Temp. Coeff. (Į) 0.05 %/°K Junction Box IP67 rated, with 3 bypass diodes
Operating temperature -40°C to + 85°C Cables UV resistant solar cable 900 mm (35.43“), sec. 4.0 mm2 (12 AWG)
Loading Capacity 728 pcs / 40 ft HC Max. Load Wind load: 2400 Pa / Snow load: 5400 Pa