ENGINEERING GRAPHIC
eR | | ere | o & | 2
Total: 100 Marks
0) Marks | End Term: 50 Marks:
re
Pre-requisites: Knowledge of Applied Physics
Course Content
1. Orthographic Projections fi ¢
Theory of rai inhi Projections, planes of projection, four quardrants. first anale
Projection, third angle projection, B.LS. Code of practice, view analysis, Se ei =
object. laying out three view drawings. hidden lines and curves surfaces. conventional lines.
dimensioning and lettering, conversion of pictorial view into orthographic views
development of missing views.4. Graphical Staties
Grap] ical methods. Basie concept, Bow’s notation, space diagram, force and polar diagram.
funicitar polygon. support and support reactions, analysis of trusses, compressive and tensile
2s in plane framed structures
str
stress
Reference Books
1. Engineering Drawing- P.S.Gill (S.K.Kataria & sons, Ludhiana)
Hlementary Engineering Drawing- N.D.Bhatt (Charotar Publishing House)
Graphic Staties- P.S.Gill (S.K.Kataria & sons, Ludhiana) oo
2
a,
Course Outcome: After the completion of the course, students are able
To understand the concepts like dimensioning, conventions and standard related to
ionally efficient.
1
working drawings in order to become prof
To understand the theory of projections.
Fo draw orthographic projections of lines, planes and solids
| ne eaten ond muenmside
ewVisible line | ————— Dimension and
ge Wee et extension line
Hidden line | ---~ Cutting plane
— line
Center line | ——-——
Section line
Phantom line | —---——
Break linePs
1st
Preferred
F =] 0.125 in (3 mm)
Depends on drawing size
<= <=
2nd 3rd
Optional Arrowhead StylesPlumb line contained in the VP
Principal vertical plane or VP
Ground line of 1 and 47 planes
Principal horizontal plane or HP