PEVASA SAND FILTER & CARBON FILTER
ABOUT PEVASA FILTER:
‘Standardised configuration for Sand Filter or Carbon Filter or
Water Softener or Demineralizer System
‘Valve and pipework anti corrosion resistant plastic ( PVC )
FRP Tank 100 % anti corrosion material reinforced polyester
Fibre Glass or Mildsteel Epoxy inside
Working pressure 5 bar for FRP Tank and 6 bar standard
for Mildstee! Tank
Simple, reliable control system, with provision for operation.
Included valve, lateral collector, pressure Indicator, safty valve,
and media filter
‘Complete face piping configuration
Manual operation system or Automatic operation system
with actuator butterfly valve
‘Automatic operation system is combined by stager and timer /
volume / pressure difference
Flow sensor and Diffrential presure gauge is optional
‘SPECIFICATION:
Type : Sand Filter SF-x"-y™
Carbon Filter CF
Capacity 2 up to 200 m3/hr
Pipe In/ Outlet : 9 1"to 6"
Dimension : 9 250 mm to 2450 mm
Material Tank: FRP/ Mildsteel Epoxy Inside
Operation : Manual or Automatic Backwashing System
*c=M ( Manual )or A ( Automatic)
y= eapacity
Office : PT. Sarana Prima Enguna
‘Ji,Gunung Sahari Raya, No 84 ¢
Phone. 021-4200045, Fax. 021-4200483
website : http:/imww.spe.co.id
email : info@spe.co.id
Factory: Jl. Raya Serang, KM 12
Cikupa - Tangerang
Techni
31 specification will be given depend on request,
Note:
Due to our policy of continuous improvement, we reserve the right
to amend the specification of equipment without prior notofication