You are on page 1of 4

How to take off configuration from fire detection system

1. Preparing USB and then please trying to format it on your PC!


2. Plug in the USB at USB port, it’s located at front of panel. (see picture below)

4. Press ‘MENU’ button


5. Select the ‘6. Service Menu’
6. Select the ‘6. Configuration’

7. Select the ‘3. Save configuration to USB Memory’


8. Select the file for load to USB and press ‘OK’

9. Please confirm + ‘OK’


10. You can find ‘OPERATION SUCCEEDED’ after step 9

You might also like