Professional Documents
Culture Documents
Abbreviations:
[ ]: show the number of stitches you should have per round/row.
rnd: round
sc: single crochet
DAR: double adjustable ring
dec2tog: invisible decrease stitch, combine 2stitches
ch: chain
BLO: black loop only
sl st: slip stitch
Supplies:
4mm Crochet Hook
1.5 Skeins (7oz) Main Body Color
Small Amount of Yarn for Accent Colors and Details
I use Red Heart Classic yarn, this is a worsted weight yarn. I have used Red Heart Super
Soft and it turned out well, so most worsted weight yarn should be just fine.
Tapestry Needle
Polyfill Stuffing
Small Amount of Ribbon in Desired Color
Sewing Needle
Thread in Similar Color to Ribbon
This pattern is done in the round. The ear is the exception, it will be done in rows.
Finished product stand about 24 inches tall.
Arms:
Make 2
With Main Color
Rnd 1: 6 sc DAR [6]
Rnd 2: (2sc first 2 st, sc next st) twice [10]
Rnd 3: (2sc first st, sc next st, 2sc next st, sc next 2 st) twice [14]
Rnd 4: (2sc first 2st, sc next st, 2sc next 2 st, sc next 2 st) twice [22]
Rnd 5: (2sc first 3 st, sc next 2st, 2sc next 3 st, sc next 3 st) twice [34]
Rnd 6-13: sc around [34]
Rnd 14: (dec2tog 3 times, sc next 11 st) twice [28]
Rnd 15: dec2tog twice, sc next 8 st, dec2tog 3 times, sc next 8 st, dec2tog [22]
Rnd 16-18: sc around [22]
Rnd 19: (dec2tog, sc next 9 st) twice [20]
Begin Stuffing
Fasten off. Stuff to desired stiffness, leave the top of the arm lightly stuffed.
Legs:
Make 2
With Accent Color
Leave beginning tail long and sew up any large holes left at ends of chain after doing a couple of rounds.
Rnd 1: Ch 5. *2sc in the 2nd chain from hook, sc next 2 st, 2sc in last st*
Rotate work, and continue on the back side of the ch, starting with the first st, repeat * [12]
Rnd 2: (2sc first st, sc next 3 st, 2sc next st, sc next st) twice [16]
Rnd 3: (sc first st, 2sc next 2 st, sc next 3 st, 2sc next 2 st) twice [24]
Rnd 4: (sc first 2 st, 2sc next 3 st, sc next 4 st, 2sc next 3 st) twice [36]
Rnd 5: sc first 5 st, *2sc next 2 st, sc next 8 st, 2sc next 2 st,* sc next 6 st, repeat *, sc last st [44]
Switch to main color
Rnd 6-12: sc around [44]
Rnd 13: sc first 9 st, (dec2tog, sc next 2 st) 3 times, sc last 23 st [41]
Rnd 14: sc first 8 st, (dec2tog, sc next 2 st) 3 times, sc last 21 st [38]
Rnd 15: sc first 9 st, dec2tog, sc next 3, dec2tog, sc last 22 st [36]
Rnd 16-17: sc around [36]
Begin stuffing the foot, and continue to stuff as you create the leg.
Head/Body:
With Main color
Rnd 1: 6sc DAR [6]
Rnd 2: 2sc each st around [12]
Rnd 3: (2sc first st, sc next st) around [18]
Rnd 4: (2sc first st, sc next 2 st) around [24]
Rnd 5: (2sc first st, sc next 3 st) around [30]
Rnd 6: (2sc first st, sc next 4 st) around [36]
Rnd 7: (2sc first st, sc next 5 st) around [42]
Rnd 8: (2sc first st, sc next 6 st) around [48]
Rnd 9: (2sc first st, sc next 7 st) around [54]
Rnd 10: (2sc first st, sc next 8 st) around [60]
Rnd 11: (2sc first st, sc next 9 st) around [66]
Rnd 12: (2sc first st, sc next 10 st) around [72]
Rnd 13: (2sc first st, sc next 11 st) around [78]
Rnd 14: (2sc first st, sc next 12 st) around [84]
Rnd 15-26: sc around [84]
Rnd 27: (dec2tog, sc next 12 st) around [78]
Rnd 28: (dec2tog, sc next 11 st) around [72]
Rnd 29: (dec2tog, sc next 10st) around [66]
Rnd 30: (dec2tog, sc next 9 st) around [60]
Rnd 31: (dec2tog, sc next 8 st) around [54]
Rnd 32: (dec2tog, sc next 7 st) around [48]
Rnd 33: (dec2tog, sc next 6 st) around [42]
Rnd 34: (dec2tog, sc next 5 st) around [36]
Rnd 35: (dec2tog, sc next 4 st) around [30]
Rnd 36-37: sc around [30]
Rnd 38: Fold the arms in half, be sure to make sure the flatter sides of the hands will be against the side
of the bear and facing out when attached. This will make the arm only 8 st, rather than 16, 2 sts lined up
next to each other.
sc the first 8 st, attaching the arm as you go. To do so, put the hook through both loops of both
side-by-side sts of the arm, then through both loops of the st on the bear body, yarn over, pull up the
loop through all but 1 loop (2 loops on hook), yarn over, and pull through all loops, 1 sc created.
sc the next 7 st, sc the next 8 st while attaching the 2nd arm, sc last 7 st [30]
Nose:
Rnd 1: 6sc DAR [6]
Rnd 2: 2sc each st around [12]
Rnd 3: (2sc first st, sc next st) around [18]
Rnd 4: (2sc first st, sc next 2 st) around [24]
Rnd 5: (2sc first st, sc next 3 st) around [30]
Rnd 6: (2sc first 3 st, sc next 12 st) twice [36]
Rnd 7-10: sc around [36]
Fasten off, leaving tail long for sewing.
Satin stitch on nose with dark brown yarn before attaching to the bear head. I like to use the point of
the nose at the bottom as the same hole for all stitches, then stitch vertically along the top of the nose,
always using the same point at the bottom. When I have made the shape of the nose this way, solid
with yarn, I go back and stick back and forth with satin stitch horizontally with the shape of the nose.
This gives the nose good shape and makes it stick out just a little.
Stuff nose and sew on to the face. I find it helps to stuff lightly, sew on most of the way, then finish
stuffing and finishing sewing on.
Ears:
With Accent Color
Row 1: ch 2. 5sc in 2nd ch from hook. Ch 1, turn. [5]
Row 2: 2 sc each st. Ch 1, turn. [10]
Row 3: (2sc first st, sc next st) across [15]
Row 4: (2sc first st, sc next 2 st) across [20]
Switch to main color.
Row 5: sc across. Ch 1, turn. [20]
Row 6: BLO sc across. Ch 1, turn. [20]
Row 7: (dec2tog, sc next 2 st) across. Ch 1, turn. [15]
Row 8: (dec2tog, sc next st) across. Ch 1, turn. [10]
Row 9: dec2tog across. Sl st through both layers to edge. Ch 1, turn. [5]
Row 10: sc across the bottom of the ear, joining the two sides as go.
Fasten off, leaving tail long for sewing.
Sew on to head.
Eyes:
Make 2
Rnd 1: 4 sc DAR [4]
Rnd 2: 2sc each st around [8]
Fasten off, leaving tail long for sewing.
Stuff lightly. Fold in half, dec2tog sts and join the 2 sides at the same time. About 4 sts across.
Fasten off, leaving tail long for sewing.
Paw Pads:
Make 2 (one for each front paw)
Rnd 1: 6sc DAR [6]
Rnd 2: (2sc first 2 st, sc next st) twice [10]
Rnd 3: (2sc first 2 st, sc enxt 3 st) twice [14]
Fasten off, leaving tail long for sewing.
Sew each pad on to the flat sides of paw, facing the body, forming the shape of a paw print.
Use the ribbon and tie a bow around Dawson’s neck. Use thread of a similar color and make small
stitches through the knot of the bow to prevent it from being able to come undone. I also like to stitch it
to the bear with these stitches so the bow cannot slide around the neck.