Professional Documents
Culture Documents
Tile Back Glue Coating Primer Specification: 1. Products Description
Tile Back Glue Coating Primer Specification: 1. Products Description
1. Products Description
The vitrified tile back glue coating primer is composed of powders and liquid materials. Powders are
blended from high quality cement, refined sands and modifiers; liquid materials are blended from
imported polymer emulsions, modifiers, etc. The product is used in back coating interface treatment of
low water absorption vitrified tiles and can release the majority of the stress generated between tile
glue and vitrified tiles. The product has a very good transition effect on bonding between common tile
glue and vitrified tiles and can effectively eliminate the phenomena such as hollowing and falling of
vitrified tiles.
2. Application Scope
Applicable to the back coating primer of glazed tiles, through-body tiles, polished tiles, polished glazed
tiles, thin slab tiles, vitrified tiles, anti-slip tiles, ancient bricks, mosaics, marble, granite, slate, etc.
3. Products Features
Good permeability,
High initial viscosity,
High water and alkali water resistance,
Good weather resistance
Tile back glue coating primer specification
4. Construction Method
Backsurface Clean
5. Storage
This product should be transported and stored at 5-30 ℃, and the storage temperature is valid
for 6 months at 25 ℃; below 0 ℃, it will freeze and solidify and cannot be restored. If stored at
sub-zero temperature, please take good thermal insulation measures;