$+S Separation and
Sorting Technology GmbH
@ Product Purity.
™ Greater Security.
@ Added Value
Control Unit PRIMUS
Electronic control unit for
metal detectorsControl Unit PRIMUS
S+S standard control unit for
products for the plastics industry
Easy to control with membrane keys
and LED's
Function ,Auto-Set" for optimum
compensation of product effects and
other influencing factors on-site
(e.g. vibrations or electro smog)
Digital signal processing via
microprocessor with self-monitoring
and self-adjustment.
Memory space for eight different
productsControl and display elements
Vonenone
LED-line
Control buttons
Menu bar
Function key
Function key
Red lamp
Red lamp
Cad
8 digits
+77, F
3 parameters
Reset
Test
Storung (fault)
Metall (metal)
To control the system and give the metal signal (visual)
To control and adjust the control parameters
To navigate between parameters
Reset metal or fault signal
Test button for metal detection system
Blinking in case of fault
Glowing in case of metal signalSystem design
1 Electronic housing Optional design
e.g. with integrated belt conveyor
2 Electronic board
3 Cover plate with control elements control
The electronic housing comes in protection
class 1P65 (dust proof and protected against
water jet).Functional elements on the electronic board
B-fold switch Jumpers for enabling operation Pots Eprom
Machina sitios aco features ject duration emery fer systam
Srcemibiefor aitomer, Qumpar 1, encblaproductleaning eet daly sd product
Egimanl/ aiematk Lmoer 2 aneblepreduet change Wo te furetion parameters
feat Aimpar 3, cneble Seratity sating
HU te
Least 2ligit7-segment display
Bisson fe
Fats me
{Tine Rrctlons
16- pole ribbon cable connector
Cecnecter for Friis central panel
aumper
Enable parameter
seting
Hocswiteh
Paremeter selection
“may. 1e parameters)
Extemal —Input/Outil connector Coll connector
Mains connector Fouttrel 2a put Receiver Transmitter
et 24 module tev connector (empable with Sensi) (Gavpatble with Sersity)
Mains connector Metal relaySystem connection
= Operating voltage: 100-240 VAC (+ 10%) 50/60 Hz
= Current input: Approx. 160 mA/115V, approx. 80mA/230V
= Fuse: 1.6 A slow-blowing
= Mains cable: 1.8 m with plug
= IP rating: IP65
= Reject duration: Adjustable from 0.05 to 29 sec
= Scanning sensitivity: steplessly adjustable
= Self-monitoring: Electronics and sensor functionInputs and outputs
Switching inputs
" Treset
= 4 manual ejection
= 1 compressed-air monitor or thermo switch or filling level monitor
= 1 initiator (flap position monitor)
Switching outputs
= 2 metal detection
= 1 fault signal
= 2 switching outputs 24V DC, 100 mA, for metal detection
Options / accessories
= Control Unit remotely installable up to 15m
= Metal counter
= etc.Top performance features
Easy to control with membrane keys
and LED's
Function ,Auto-Set" for optimum
compensation of product effects and
other influencing factors on-site
(e.g. vibrations or electro smog)
Digital signal processing via
microprocessor with self-monitoring
and self-adjustment
Ease of use with space for eight
different products, thereof three are
pre-set and optimized for the plastics
industry:
— PM 1: low sensitivity
— PM 2: medium sensitivity
— PM 3: high sensitivity
~ PM 4 to 8 can be chosen
individuallyAdditional performance features
Ease of use with space for eight
different products, thereof three are
pre-set and optimized for the plastics
industry:
— PM 1: low sensitivity
~ PM 2: medium sensitivity
~— PM 3: high sensitivity
~ PM 4 to 8 can be chosen
individually
Half wave processing
Reset-mode can be adjusted
(auto, manually, external)
Increased interference immunit)
against electro smog and vibrations
System can be locked to prevent false
control (can be activated if needed)
Self monitoring system with fault
display
CE-certified by independent instituteControl principle
General control principle:
1. Select parameter with button “F" (toggle)
2. Adjust parameter with “+/-" buttons
3. Confirm changes with button “F*
4.
Esc/Reset jumps back at any time to initial
status without parameter change
Adjust sensitivity:
1. 1x button “F*
2. Change parameter with ”+/-" buttons
3. Confirm changes with button “F"
Product change:
1. 2x button “F*
2. Change parameter with ”+/-" buttons
3. Confirm changes with button “F*
Activate Auto-Set
1. 3x button “F*
2. Auto-Set starts automatically after three seconds
3. Confirm changes with button “F"New function ,,Auto-Set™
Certain conditions at the place of installation are quite common in the plastics industry and
can influence a metal detector and can lead to false detections:
+ Conductive material (e.g. wet material)
+ Vibrations
+ Electro-smog
= “Auto-Set® can compensate such environmental influences and delivers optimum scanning
sensitivity and prevents false detections
= Function can be activated individually and automatically on-site by the customer
» The function is being offered in this form by S+S exclusivelyComparison PRIMUS user interface
Original design New as of 06/2013
Improvements:
Switch +/- buttons for more intuitive control
Additional LED's clearly display at any time, which parameter is being
adjusted at the moment (sensitivity, product change or Auto-Set)
New function “Auto-Set™ replaces “product teach-in”, the function can
compensate material conductivity as well as vibrations on-siteThank you very much for your attention.
S+S Separation and Sorting Technology GmbH
Regener StraBe 130
D-94513 Schénberg
Germany
Tel: +49 (0) 8554 308-0
www. sesotec.com