Professional Documents
Culture Documents
geoslamacademy.com
Charging the batteries
2. 3. 4.
Plug the charger into the AC mains – the LED light
will glow green.
To start a new scan press Datalogger Return to the start Datalogger Simply insert the USB Datalogger Plug the charger lead firmly into the battery the LED
and hold the function light sequence location to end the scan. light sequence stick light sequence light will change to red to indicate charging.
button on the datalogger Once the HORIZON is
OR the HORIZON button back at the start location STATUS DATA Once the green LED is When the LED light changes back to green, the
STATUS DATA STATUS DATA
(scanner) until the light the scan can be ended off the data is on your battery is fully charged.
stops flashing USB pen and ready to
Press and hold the be processed. Now you
Once the STATUS LED is function button until the can turn the system off
green, pick up the scan- rotation stops. This ends (press and hold the po-
ner and start scanning! your scan. wer button) or start up a
new scan.
Once the orange data For more information, troubleshooting and
LED is off the DATA is best pratice guides, visit
ready for download. geoslamacademy.com