Professional Documents
Culture Documents
Based on the requirements of LRT-CV-ST-CS-L3-DEPO ZONA 10 & 11 points 3.2.1, the using of granular material must
comply the AASHTO Class A-1 classification, here are the AASHTO A-1 requirements :
Based on the requirements of AASHTO A-1, there are several requirements that must be complete :
Passing procentage of sieve No.10 (opening diameter 2.00 mm) must not exceed 50%
Passing procentage of sieve No.40 (opening diameter 0.425 mm) must not exceed 30%
Passing procentage of sieve No.200 (opening diameter 0.075 mm) must not exceed 15%
Plasticy index must not exceed 6%
The results of the sieve analysis laboratory test for granular material are as follows:
the results of the sieve analysis in the laboratory :
Passing procentage of sieve No.10 (opening diameter 2.00 mm) is 19,05 % (complete requirements)
Passing procentage of sieve No.40 (opening diameter 0.425 mm) is 3.43 % (complete requirements)
Passing procentage of sieve No.200 (opening diameter 0.075 mm) is 0% (complete requirements)
The results of laboratory testing of the plasticity index on granular materials is 5.59 % (complete requirements)
From the results of the analysis above, it can be concluded that the granular material complete tehe standards
requirements AASHTO A-1
For controlling of the quality embankment works on heavy maintenance, depot provided series of test :
the standard used for testing granular materials (heavy maintenance embankment) is technical specification PT Adhi
karya TBK and Technical specification for highway and toll road ( Direktorat jendral binamarga)
for every 1000 m3 of granular material production will be carried out laboratory tests, laboratory tests serve to
take samples of 5 plasticity index, 5 sample if grain size analysis and 1 sample of maximum dry density.
Sandcone and cbr on field are continuously tested at every 700 m3 granular material which has been spread out
and compacted at heavy maintenance.