Professional Documents
Culture Documents
Wago-I/O-System 750: 750-530 (/XXX-XXX)
Wago-I/O-System 750: 750-530 (/XXX-XXX)
Pos : 2 /D okumentati on allgemein/Ei nband/Ei nband H andbuch - Fronts eite 2015 - mit Doc Variabl en (Standar d) @ 9\mod_1285229289866_0.doc x @ 64941 @ @ 1
Manual
750-530(/xxx-xxx)
8DO 24V DC 0.5A
8-Channel Digital Output Module 24 VDC; Short-
circuit Protected; High-side Switching
Version 1.2.0
Pos : 3 /Alle Serien (Allgemeine M odul e)/Hinweise z ur Dokumentation/Impres sum für Standardhandbüc her - allg. Angaben, Ansc hriften, Tel efonnummer n und E-Mail-Adres sen @ 3\mod_1219151118203_21.doc x @ 21060 @ @ 1
2 WAGO-I/O-SYSTEM 750
750-530 8DO 24V DC 0.5A
Hansastraße 27
D-32423 Minden
E-Mail: info@wago.com
Web: http://www.wago.com
Technical Support
E-Mail: support@wago.com
Every conceivable measure has been taken to ensure the accuracy and
completeness of this documentation. However, as errors can never be fully
excluded, we always appreciate any information or suggestions for improving the
documentation.
E-Mail: documentation@wago.com
We wish to point out that the software and hardware terms as well as the
trademarks of companies used and/or mentioned in the present manual are
generally protected by trademark or patent.
=== Ende der Liste für T extmar ke Ei nband_vorne ===
Manual
Version 1.2.0
WAGO-I/O-SYSTEM 750 Table of Contents 3
750-530 8DO 24V DC 0.5A
Pos : 5 /D okumentati on allgemein/Verzeic hnisse/Inhalts verz eichnis - Ü berschrift oG und Verzei chnis @ 3\mod_1219151230875_21.doc x @ 21063 @ @ 1
Table of Contents
1 Notes about this Documentation ................................................................. 5
1.1 Validity of this Documentation ................................................................. 5
1.2 Copyright................................................................................................... 5
1.3 Symbols ..................................................................................................... 6
1.4 Number Notation ....................................................................................... 8
1.5 Font Conventions ...................................................................................... 8
2 Important Notes ........................................................................................... 9
2.1 Legal Bases ............................................................................................... 9
2.1.1 Subject to Changes ............................................................................... 9
2.1.2 Personnel Qualifications ....................................................................... 9
2.1.3 Use of the WAGO-I/O-SYSTEM 750 in Compliance with Underlying
Provisions ............................................................................................. 9
2.1.4 Technical Condition of Specified Devices ......................................... 10
2.2 Safety Advice (Precautions) .................................................................... 11
3 Device Description ..................................................................................... 13
3.1 View ........................................................................................................ 15
3.2 Connectors............................................................................................... 16
3.2.1 Data Contacts/Internal Bus ................................................................. 16
3.2.2 Power Jumper Contacts/Field Supply ................................................ 17
3.2.3 CAGE CLAMP® Connectors ............................................................. 19
3.3 Display Elements .................................................................................... 20
3.4 Schematic Diagram ................................................................................. 21
3.5 Technical Data ........................................................................................ 22
3.5.1 Device Data ........................................................................................ 22
3.5.2 Power Supply...................................................................................... 22
3.5.3 Communication .................................................................................. 22
3.5.4 Outputs ............................................................................................... 22
3.5.5 Connection Type ................................................................................ 23
3.5.6 Climatic Environmental Conditions ................................................... 23
3.6 Approvals ................................................................................................ 24
3.7 Standards and Guidelines ........................................................................ 26
4 Process Image ............................................................................................. 27
5 Mounting..................................................................................................... 28
5.1 Mounting Sequence ................................................................................. 28
5.2 Inserting and Removing Devices ............................................................ 29
5.2.1 Inserting the I/O Module .................................................................... 29
5.2.2 Removing the I/O Module .................................................................. 30
6 Connect Devices ......................................................................................... 31
6.1 Connecting a Conductor to the CAGE CLAMP® ................................... 31
7 Using Interference-Free Variants of I/O Modules in Safety Related
Applications ................................................................................................ 32
7.1 Important Notes ....................................................................................... 33
7.2 Connecting the IO Module to Safety Switching Devices or Safety
Modules ................................................................................................... 34
Manual
Version 1.2.0
4 Table of Contents WAGO-I/O-SYSTEM 750
750-530 8DO 24V DC 0.5A
Manual
Version 1.2.0
WAGO-I/O-SYSTEM 750 Notes about this Documentation 5
750-530 8DO 24V DC 0.5A
Pos : 7 /Alle Serien (Allgemeine M odul e)/Übersc hriften für all e Serien/Hi nweis e zur D okumentati on/Hinweise z u dies er D okumentation - Ü berschrift 1 @ 4\mod_1237987661750_21.doc x @ 29029 @ 1 @ 1
This documentation is only applicable to the I/O module 750-530 (8DO 24V DC
0.5A) and the variants listed in the table below.
Pos : 11 /Serie 750 ( WAGO-I/O-SYST EM)/Hi nweis e z ur D okumentati on/Gültigkeits bereic h/Variantenlisten/Variantenliste - 750- xxx - Standar dversion und Vari anten /025- 000, /000-800 @ 21\mod_1415022632316_21.doc x @ 167142 @ @ 1
Table 1: Variants
Item Number/Variant Designation
750-530 8DO 24V DC 0.5A
750-530/025-000 8DO 24V DC 0.5A/T
750-530/000-800 8DO 24V DC 0.5A
Pos : 12 /All e Seri en (Allgemei ne Module)/Hi nweis e zur D okumentati on/Hinweise/Hinweis: Gültig keit der Angaben für aufg elistete Varianten @ 9\mod_1281520778141_21.doc x @ 63085 @ @ 1
The I/O module 750-530 shall only be installed and operated according to the
instructions in this manual and in the manual for the used fieldbus
coupler/controller.
1.2 Copyright
This Manual, including all figures and illustrations, is copyright-protected. Any
further use of this Manual by third parties that violate pertinent copyright
provisions is prohibited. Reproduction, translation, electronic and phototechnical
filing/archiving (e.g., photocopying) as well as any amendments require the
written consent of WAGO Kontakttechnik GmbH & Co. KG, Minden, Germany.
Non-observance will involve the right to assert damage claims.
Manual
Version 1.2.0
6 Notes about this Documentation WAGO-I/O-SYSTEM 750
750-530 8DO 24V DC 0.5A
Pos : 14.2 /Dokumentation allgemei n/Glieder ungs elemente/---Seitenwechs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1
Pos : 14.3 /All e Seri en ( Allgemei ne Module)/Ü bers chriften für alle Serien/Hinweis e z ur Dokumentation/Symbol e - Ü bersc hrift 2 @ 13\mod_1351068042408_21.doc x @ 105270 @ 2 @ 1
1.3 Symbols
Pos : 14.4.1 /All e Serien ( Allgemei ne Module)/Wic htige Erläuterungen/Sicherheits- und sons tige Hinweis e/Gefahr/Gefahr: _War nung vor Personenschäden allgemei n_ - Erl äuter ung @ 13\mod_1343309450020_21.doc x @ 101029 @ @ 1
Personal Injury!
Indicates a high-risk, imminently hazardous situation which, if not avoided, will
result in death or serious injury.
Pos : 14.4.2 /All e Serien ( Allgemei ne Module)/Wic htige Erläuterungen/Sicherheits- und sons tige Hinweis e/Gefahr/Gefahr: _War nung vor Personenschäden durc h elektrisc hen Strom_ - Erläuterung @ 13\mod_1343309694914_21.doc x @ 101030 @ @ 1
Personal Injury!
Indicates a moderate-risk, potentially hazardous situation which, if not avoided,
could result in death or serious injury.
Pos : 14.4.4 /All e Serien ( Allgemei ne Module)/Wic htige Erläuterungen/Sicherheits- und sons tige Hinweis e/Vorsic ht/Vorsicht: _War nung vor Pers onensc häden allgemein_ - Erläuterung @ 13\mod_1343310028762_21.doc x @ 101038 @ @ 1
Personal Injury!
Indicates a low-risk, potentially hazardous situation which, if not avoided, may
result in minor or moderate injury.
Pos : 14.4.5 /All e Serien ( Allgemei ne Module)/Wic htige Erläuterungen/Sicherheits- und sons tige Hinweis e/Achtung/Achtung: _War nung vor Sac hsc häden allgemein_ - Erläuterung @ 13\mod_1343310134623_21.doc x @ 101041 @ @ 1
Damage to Property!
Indicates a potentially hazardous situation which, if not avoided, may result in
damage to property.
Pos : 14.4.6 /All e Serien ( Allgemei ne Module)/Wic htige Erläuterungen/Sicherheits- und sons tige Hinweis e/Achtung/Achtung: _War nung vor Sac hsc häden durc h elektr ostatis che Aufladung_ - Erläuterung @ 13\mod_1343310227702_21.doc x @ 101044 @ @ 1
Important Note!
Indicates a potential malfunction which, if not avoided, however, will not result in
damage to property.
Pos : 14.4.8 /All e Serien ( Allgemei ne Module)/Wic htige Erläuterungen/Sicherheits- und sons tige Hinweis e/Infor mation/Infor mation: _Weiter e Infor mation allgemei n_ - Erl äuter ung @ 13\mod_1343310439814_21.doc x @ 101051 @ @ 1
Manual
Version 1.2.0
WAGO-I/O-SYSTEM 750 Notes about this Documentation 7
750-530 8DO 24V DC 0.5A
Additional Information:
Refers to additional information which is not an integral part of this
documentation (e.g., the Internet).
Pos : 14.5 /Dokumentation allgemei n/Glieder ungs elemente/---Seitenwechs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1
Manual
Version 1.2.0
8 Notes about this Documentation WAGO-I/O-SYSTEM 750
750-530 8DO 24V DC 0.5A
Pos : 14.6 /All e Seri en ( Allgemei ne Module)/Hi nweis e zur D okumentati on/Dars tellung der Zahlens ys teme - Ü berschrift 2 und Inhal t @ 3\mod_1221059454015_21.doc x @ 21711 @ 2 @ 1
Pos : 14.7 /All e Seri en ( Allgemei ne Module)/Hi nweis e zur D okumentati on/Sc hriftkonventi onen - Ü bers chrift 2 und Inhalt @ 3\mod_1221059521437_21.doc x @ 21714 @ 2 @ 1
Manual
Version 1.2.0
WAGO-I/O-SYSTEM 750 Important Notes 9
750-530 8DO 24V DC 0.5A
Pos : 16 /All e Seri en (Allgemei ne Module)/Ü berschriften für alle Serien/Wichtige Erläuterungen/Wichtige Erläuter ungen - Übersc hrift 1 @ 4\mod_1241428899156_21.doc x @ 32170 @ 1 @ 1
2 Important Notes
Pos : 17.1 /All e Seri en ( Allgemei ne Dokumente) ( Allgemei ne Module)/Wic htige Erläuterungen/Wic htige Erläuterungen - Einl eitung @ 3\mod_1221059818031_21.doc x @ 21717 @ @ 1
All changes to the coupler or controller should always be carried out by qualified
personnel with sufficient skills in PLC programming.
Pos : 17.5 /Serie 750 (WAGO-I/O-SYST EM)/Wic htige Erläuterungen/Bes timmungsgemäß e Verwendung Bes ti mmungsgemäße Verwendung 750-xxxx - Ü berschrift 3 und Inhal t @ 3\mod_1224064151234_21.doc x @ 24070 @ 3 @ 1
The devices have been developed for use in an environment that meets the IP20
protection class criteria. Protection against finger injury and solid impurities up to
12.5 mm diameter is assured; protection against water damage is not ensured.
Unless otherwise specified, operation of the devices in wet and dusty
environments is prohibited.
Manual
Version 1.2.0
10 Important Notes WAGO-I/O-SYSTEM 750
750-530 8DO 24V DC 0.5A
Please send your request for modified and new hardware or software
configurations directly to WAGO Kontakttechnik GmbH & Co. KG.
Pos : 17.7 /Dokumentation allgemei n/Glieder ungs elemente/---Seitenwechs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1
Manual
Version 1.2.0
WAGO-I/O-SYSTEM 750 Important Notes 11
750-530 8DO 24V DC 0.5A
Pos : 17.8 /All e Seri en ( Allgemei ne Module)/Ü bers chriften für alle Serien/Wichtige Erläuter ungenSic her hei tshi nweis e - Übersc hrift 2 @ 6\mod_1260180299987_21.doc x @ 46724 @ 2 @ 1
For installing and operating purposes of the relevant device to your system the
following safety precautions shall be observed:
Pos : 17.10.1 /Alle Serien (Allgemeine D okumente) (Allgemeine M odul e)/Wichtige Erläuter ungen/Sic herheits hinweise/Gefahr /Gefahr: Nicht an Geräten unter Spannung ar beiten! @ 6\mod_1260180365327_21.doc x @ 46727 @ @ 1
Pos : 17.10.4 /Alle Serien (Allgemeine D okumente) (Allgemeine M odul e)/Wichtige Erläuter ungen/Sic herheits hinweise/Gefahr /Gefahr: Auf normg erec hten Ansc hluss ac hten! @ 6\mod_1260180753479_21.doc x @ 46739 @ @ 1
Pos : 17.11.1 /Alle Serien (Allgemeine D okumente) (Allgemeine M odul e)/Wichtige Erläuter ungen/Sic herheits hinweise/Ac htung/Ac htung: Defekte oder besc hädigte Ger äte aus tausc hen! @ 6\mod_1260180857358_21.doc x @ 46743 @ @ 1
Manual
Version 1.2.0
12 Important Notes WAGO-I/O-SYSTEM 750
750-530 8DO 24V DC 0.5A
Manual
Version 1.2.0
WAGO-I/O-SYSTEM 750 Device Description 13
750-530 8DO 24V DC 0.5A
Pos : 19 /All e Seri en (Allgemei ne Module)/Ü berschriften für alle Serien/Gerätebesc hreibung/Gerätebeschr eibung - Übersc hrift 1 @ 3\mod_1233756084656_21.doc x @ 27096 @ 1 @ 1
3 Device Description
Pos : 20.1 /Serie 750 (WAGO-I/O-SYST EM)/Ger ätebesc hrei bung/Ei nlei tung/Anwendung/D O/Anwendung 750- x5xx D O @ 3\mod_1233764594468_21.doc x @ 27120 @ @ 1
The 750-530 (8DO 24V DC 0.5A) Digital Output Module transmits binary control
signals from the automation device to the connected actuators (e.g., solenoid
valves, contactors, transmitters, relays or other electrical loads).
Pos : 20.2 /Serie 750 (WAGO-I/O-SYST EM)/Ger ätebesc hrei bung/Ei nlei tung/I/O-Besc hrei bung/DO/I/O-Besc hrei bung 750-05xx 8 D O 1-Leiter (DO 1 ... DO 8) @ 4\mod_1235647050031_21.doc x @ 27858 @ @ 1
The module has eight output channels. Eight 1-conductor actuators may be
directly connected to the module. The actuators can be connected using
connection DO 1 … DO 8.
Pos : 20.3 /Serie 750 (WAGO-I/O-SYST EM)/Wic htige Erläuterungen/Sicherheits- und sonstig e Hinweis e/Hinweis/Hi nweis: D O Potenti al ver vi elfältigungs modul e für Aktor vers orgung ei nsetzen @ 3\mod_1233765481250_21.doc x @ 27140 @ @ 1
The I/O module outputs provide high-side switching. If the signal status of an
output channel is at “high” the 24 V potential for field power will be switched to
the appropriate output connection.
Pos : 20.8 /Serie 750 (WAGO-I/O-SYST EM)/Ger ätebesc hrei bung/Ei nlei tung/I/O-Besc hrei bung/DO/I/O-Besc hrei bung 750-05xx Leistungs kontakt durch Ei nspeis eklemme @ 5\mod_1246856959993_21.doc x @ 36590 @ @ 1
The supply voltage for the field side is derived from an adjacent supply module by
means of power jumper contacts.
Pos : 20.9 /Serie 750 (WAGO-I/O-SYST EM)/Ger ätebesc hrei bung/Ei nlei tung/LED-Anz eige/LED Zustand Signal @ 3\mod_1233755258578_21.doc x @ 27087 @ @ 1
The I/O module 750-530 (8DO 24V DC 0.5A) receives the 24 V voltage supply
for the field level from an upstream I/O module or from the fieldbus
coupler/controller via blade-formed power jumper contacts. It then provides these
potentials to subsequent I/O modules via spring-formed power jumper contacts.
Pos : 20.12 /Serie 750 ( WAGO-I/O-SYST EM)/Wichtig e Erl äuter ung en/Sic her hei ts- und s onstige Hinweise/Ac htung/Ac htung: Maxi maler Str om Leis tungs kontakte 10 A @ 3\mod_1226499143500_21.doc x @ 25029 @ @ 1
Manual
Version 1.2.0
14 Device Description WAGO-I/O-SYSTEM 750
750-530 8DO 24V DC 0.5A
The field voltage and the system voltage are electrically isolated from each other.
Pos : 20.14 /Serie 750 ( WAGO-I/O-SYST EM)/Gerätebeschr eibung/Ei nleitung/Versorgung/Anordnung unter Ber üc ksic htigung der Leistungs kontakte beliebig @ 3\mod_1233756233468_21.doc x @ 27099 @ @ 1
With consideration of the power jumper contacts, the individual modules can be
arranged in any combination when configuring the fieldbus node. An arrangement
in groups within the group of potentials is not necessary.
Pos : 20.15 /Serie 750 ( WAGO-I/O-SYST EM)/Gerätebeschr eibung/Ei nleitung/Einsatzbereic h/Einsatzbereic h 750- xxxx alle Koppler/C ontroll er ohne Ei nsc hränkung @ 3\mod_1232541691906_21.doc x @ 26522 @ @ 1
The I/O module 750-530 can be used with all fieldbus couplers/controllers of the
WAGO-I/O-SYSTEM 750.
Pos : 21 /D okumentation allgemei n/Glieder ungs elemente/---Seitenwechs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1
Manual
Version 1.2.0
WAGO-I/O-SYSTEM 750 Device Description 15
750-530 8DO 24V DC 0.5A
Pos : 22 /All e Seri en (Allgemei ne Module)/Ü berschriften für alle Serien/Gerätebesc hreibung/Ansic ht - Ü berschrift 2 @ 4\mod_1240984217343_21.doc x @ 31958 @ 2 @ 1
3.1 View
Pos : 23 /Serie 750 ( WAGO-I/O-SYST EM)/Ger ätebesc hrei bung/Ansic ht/Digitalausgangs kl emmen/Ansic ht 750-0530 @ 11\mod_1322217539668_21.doc x @ 83727 @ @ 1
Figure 1: View
Pos : 24 /Serie 750 ( WAGO-I/O-SYST EM)/Ger ätebesc hrei bung/Ansic ht/Ansic ht C ageCl amp® _Leg ende mit LED s @ 15\mod_1370867188922_21.doc x @ 122225 @ @ 1
Manual
Version 1.2.0
16 Device Description WAGO-I/O-SYSTEM 750
750-530 8DO 24V DC 0.5A
Pos : 26 /All e Seri en (Allgemei ne Module)/Ü berschriften für alle Serien/Gerätebesc hreibung/Ansc hlüsse - Übersc hrift 2 @ 4\mod_1240984262656_21.doc x @ 31961 @ 2 @ 1
3.2 Connectors
Pos : 27 /Serie 750 ( WAGO-I/O-SYST EM)/Ger ätebesc hrei bung/Ansc hl üss e/Datenkontakte/Kl emmenbus - Ü bersc hrift 3 @ 6\mod_1256294684083_21.doc x @ 43660 @ 3 @ 1
Manual
Version 1.2.0
WAGO-I/O-SYSTEM 750 Device Description 17
750-530 8DO 24V DC 0.5A
Pos : 30 /Serie 750 ( WAGO-I/O-SYST EM)/Ger ätebesc hrei bung/Ansc hl üss e/Leistungs kontakte/F el dvers orgung - Übersc hrift 3 @ 6\mod_1256294692864_21.doc x @ 43664 @ 3 @ 1
The I/O module 750-530 has 2 self-cleaning power jumper contacts that supply
and transmit power for the field side. The contacts on the left side of the I/O
module are designed as blade contacts and those on the right side as spring
contacts.
Pos : 31.3 /Serie 750 (WAGO-I/O-SYST EM)/Ger ätebesc hrei bung/Ansc hl üsse/Leistungs kontakte 2 LK (Mess er/Leis tungs kontakte 2 LK (Messer /Feder) - Abbil dung, einfac he Breite - Standard @ 15\mod_1367500700037_21.doc x @ 118396 @ @ 1
Pos : 31.5 /Serie 750 (WAGO-I/O-SYST EM)/Wic htige Erläuterungen/Sicherheits- und sonstig e Hinweis e/Achtung/Achtung: M axi mal er Strom Leistungs kontakte 10 A @ 3\mod_1226499143500_21.doc x @ 25029 @ @ 1
Manual
Version 1.2.0
18 Device Description WAGO-I/O-SYSTEM 750
750-530 8DO 24V DC 0.5A
Manual
Version 1.2.0
WAGO-I/O-SYSTEM 750 Device Description 19
750-530 8DO 24V DC 0.5A
Pos : 33 /Serie 750 ( WAGO-I/O-SYST EM)/Ger ätebesc hrei bung/Ansc hl üss e/CAGE CLAMP- Anschl üss e - Ü berschrift 3 @ 6\mod_1256296337770_21.doc x @ 43674 @ 3 @ 1
Manual
Version 1.2.0
20 Device Description WAGO-I/O-SYSTEM 750
750-530 8DO 24V DC 0.5A
Pos : 36 /All e Seri en (Allgemei ne Module)/Ü berschriften für alle Serien/Gerätebesc hreibung/Anz eigeel emente - Übersc hrift 2 @ 4\mod_1240984390875_21.doc x @ 31964 @ 2 @ 1
Manual
Version 1.2.0
WAGO-I/O-SYSTEM 750 Device Description 21
750-530 8DO 24V DC 0.5A
Pos : 39 /All e Seri en (Allgemei ne Module)/Ü berschriften für alle Serien/Gerätebesc hreibung/Sc hematisches Sc haltbil d - Ü bersc hrift 2 @ 4\mod_1240984441312_21.doc x @ 31967 @ 2 @ 1
Manual
Version 1.2.0
22 Device Description WAGO-I/O-SYSTEM 750
750-530 8DO 24V DC 0.5A
Pos : 42 /All e Seri en (Allgemei ne Module)/Ü berschriften für alle Serien/Gerätebesc hreibung/Technisc he Daten - Ü berschrift 2 @ 3\mod_1232967587687_21.doc x @ 26924 @ 2 @ 1
3.5.3 Communication
Table 10: Technical Data ‒ Communication
Data width (internal bus) 8 bits out
3.5.4 Outputs
Table 11: Technical Data ‒ Inputs
Number of outputs 8
Output voltage 24 V DC
Output current (max.) 0.5 A short-circuit protected
Type of load resistive, inductive, lamps
Reverse voltage protection yes
Inductive load switch off energy 0.9 J
dissipation W (max.) Lmax. = 2 Wmax. /I²
Manual
Version 1.2.0
WAGO-I/O-SYSTEM 750 Device Description 23
750-530 8DO 24V DC 0.5A
Pos : 45.1 /All e Seri en ( Allgemei ne Module)/Ü bers chriften für alle Serien/Gerätebesc hreibung/Ansc hlus stechni k - Ü berschrift 3 @ 17\mod_1380123271324_21.doc x @ 132788 @ 3 @ 1
Manual
Version 1.2.0
24 Device Description WAGO-I/O-SYSTEM 750
750-530 8DO 24V DC 0.5A
Pos : 48 /All e Seri en (Allgemei ne Module)/Ü berschriften für alle Serien/Gerätebesc hreibung/Zul ass ungen - Übersc hrift 2 @ 3\mod_1224055364109_21.doc x @ 24030 @ 2 @ 1
3.6 Approvals
Pos : 49 /Serie 750 ( WAGO-I/O-SYST EM)/Ger ätebesc hrei bung/Z ulass ungen/Infor mation: Weitere Infor mationen zu Zul ass ungen 750- xxxx @ 3\mod_1227190967156_21.doc x @ 25221 @ @ 1
The following approvals have been granted to the basic version and all variants of
750-530 I/O modules:
Pos : 51.1 /All e Seri en ( Allgemei ne Dokumente) ( Allgemei ne Module)/Z ulassungen/Standardz ulassungen/C E (Konformi täts kennz eichnung) @ 3\mod_1224494777421_21.doc x @ 24276 @ @ 1
Conformity Marking
Pos : 51.2 /All e Seri en ( Allgemei ne Dokumente) ( Allgemei ne Module)/Z ulassungen/Standardz ulassungen/cU Lus (U L508) @ 3\mod_1224055013140_0.doc x @ 24020 @ @ 1
CULUS UL508
Pos : 51.3 /Dokumentation allgemei n/Glieder ungs elemente/------Leerz eile------ @ 3\mod_1224662755687_0.doc x @ 24460 @ @ 1
Pos : 52 /Serie 750 ( WAGO-I/O-SYST EM)/Ger ätebesc hrei bung/Z ulass ungen/Allgemei n/Z ulass ung Bus kl emme 750- xxxx Allgemei n, Standardvers. und Variante /025- 000 – Einl eitung @ 21\mod_1415019151435_21.doc x @ 167138 @ @ 1
The following approval has been granted to the basic version of 750-530 I/O
modules and the variation 750-530 /025-000:
Pos : 53 /All e Seri en (Allgemei ne Module)/Z ulassungen/Standardz ulassungenKC - Kor ea C ertific ate - D O @ 20\mod_1406292019560_21.doc x @ 160338 @ @ 1
The following Ex approvals have been granted to the basic version and all
variants of 750-530 I/O modules:
Pos : 55.1 /All e Seri en ( Allgemei ne Module)/Z ulassungen/Ex-Zul ass ungen/TÜV AT EX/TÜ V 07 AT EX 554086 X: I M 2 Ex d I M b II 3 G Ex nA IIC T 4 Gc II 3 D Ex tc IIIC T135°C Dc @ 14\mod_1361949753233_0.doc x @ 113015 @ @ 1
Pos : 56 /Serie 750 ( WAGO-I/O-SYST EM)/Ger ätebesc hrei bung/Z ulass ungen/Ex/Z ulas sungen Bus kl emme 750- xxxx Ex, nur Standardversion - Einl eitung @ 9\mod_1281526321376_21.doc x @ 63104 @ @ 1
The following Ex approvals have been granted to the basic version of 750-530 I/O
modules:
Pos : 57 /All e Seri en (Allgemei ne Module)/Z ulassungen/Ex-Z ulass ungen/Sonstige/Br asilian Ex TU EV 12.1297 X Ex nA IIC T 4 Gc @ 16\mod_1379922057421_0.doc x @ 132410 @ @ 1
Manual
Version 1.2.0
WAGO-I/O-SYSTEM 750 Device Description 25
750-530 8DO 24V DC 0.5A
Pos : 59 /Serie 750 ( WAGO-I/O-SYST EM)/Ger ätebesc hrei bung/Z ulass ungen/Schiff/Z ulas sungen Bus klemme 750- xxxx Sc hiff, Standardversion und aufgelistete Vari anten - Einl eitung @ 16\mod_1376313495745_21.doc x @ 128461 @ @ 1
The following ship approvals have been granted to the basic version and all
variants of 750-530 I/O modules listed in the table:
750-530 x x x x x x x x x x
750-530
x x
/025-000
750-530
/000-800
Pos : 61.1 /All e Seri en ( Allgemei ne Dokumente) ( Allgemei ne Module)/Z ulassungen/Sc hiffsz ul ass ungen/ABS ( Americ an Bureau of Shi ppi ng) @ 3\mod_1224055151062_0.doc x @ 24023 @ @ 1
BV (Bureau Veritas)
Pos : 61.4 /All e Seri en ( Allgemei ne Dokumente) ( Allgemei ne Module)/Z ulassungen/Sc hiffsz ul ass ungen/DN V (D et N ors ke Veritas) Cl ass B @ 3\mod_1224492540562_0.doc x @ 24224 @ @ 1
Manual
Version 1.2.0
26 Device Description WAGO-I/O-SYSTEM 750
750-530 8DO 24V DC 0.5A
Pos : 63 /All e Seri en (Allgemei ne Module)/Ü berschriften für alle Serien/Gerätebesc hreibung/Nor men und Ric htlini en - Übersc hrift 2 @ 4\mod_1242804031875_21.doc x @ 33646 @ 2 @ 1
750-530 I/O modules meet the following requirements on emission and immunity
of interference:
Pos : 65 /All e Seri en (Allgemei ne Module)/N or men und Ric htli nien/EMV-N ormen - Standar d/EMV CE- Stör aussendung EN 61000-6- 4 @ 4\mod_1242798273984_21.doc x @ 33602 @ @ 1
Manual
Version 1.2.0
WAGO-I/O-SYSTEM 750 Process Image 27
750-530 8DO 24V DC 0.5A
Pos : 70 /All e Seri en (Allgemei ne Module)/Ü berschriften für alle Serien/__ noc h nic ht ei ns ortierte Ü berschriften müss en noc h eins orti ert werden __/Proz ess abbil d - Ü bersc hrift 1 @ 4\mod_1240983067828_21.doc x @ 31942 @ 1 @ 1
4 Process Image
Pos : 71 /Serie 750 ( WAGO-I/O-SYST EM)/Proz ess abbild Kl emmenbus /Hinweis: Prozes sabbildmapping abhängig von FBK/PFC, ohne Status-/C ontr olbyte @ 6\mod_1256126797251_21.doc x @ 43340 @ @ 1
Manual
Version 1.2.0
28 Mounting WAGO-I/O-SYSTEM 750
750-530 8DO 24V DC 0.5A
Pos : 74 /All e Seri en (Allgemei ne Module)/Ü berschriften für alle Serien/Monti eren/M ontier en - Übersc hrift 1 @ 3\mod_1225446744750_21.doc x @ 24900 @ 1 @ 1
5 Mounting
Pos : 75.1 /Serie 750 (WAGO-I/O-SYST EM)/M ontieren/D emontieren/M ontagerei henfolge @ 3\mod_1231770210031_21.doc x @ 25992 @ 2 @ 1
The reliable positioning and connection is made using a tongue and groove
system. Due to the automatic locking, the individual devices are securely seated
on the rail after installation.
Starting with the fieldbus coupler/controller, the I/O modules are mounted
adjacent to each other according to the project design. Errors in the design of the
node in terms of the potential groups (connection via the power contacts) are
recognized, as the I/O modules with power contacts (blade contacts) cannot be
linked to I/O modules with fewer power contacts.
Pos : 75.2 /Serie 750 (WAGO-I/O-SYST EM)/Wic htige Erläuterungen/Sicherheits- und sonstig e Hinweis e/Vorsic ht/Vorsicht: Verl etz ungsgefahr durc h s charfkantige M ess er kontakte! @ 6\mod_1256193279401_21.doc x @ 43414 @ @ 1
Manual
Version 1.2.0
WAGO-I/O-SYSTEM 750 Mounting 29
750-530 8DO 24V DC 0.5A
Pos : 75.6 /Serie 750 (WAGO-I/O-SYST EM)/M ontieren/D emontieren/Geräte einfüg en und entfer nen - Ü berschrift 2 @ 3\mod_1231768483250_21.doc x @ 25950 @ 2 @ 1
Manual
Version 1.2.0
30 Mounting WAGO-I/O-SYSTEM 750
750-530 8DO 24V DC 0.5A
Pos : 75.10 /Serie 750 ( WAGO-I/O-SYST EM)/Monti eren/D emonti eren/Bus kl emme entfer nen @ 4\mod_1239169375203_21.doc x @ 30334 @ 3 @ 1
Manual
Version 1.2.0
WAGO-I/O-SYSTEM 750 Connect Devices 31
750-530 8DO 24V DC 0.5A
Pos : 77 /All e Seri en (Allgemei ne Module)/Ü berschriften für alle Serien/Ansc hließ en/Ger äte ansc hließen - Ü bers chrift 1 @ 3\mod_1234172889468_21.doc x @ 27460 @ 1 @ 1
6 Connect Devices
Pos : 78 /Serie 750 ( WAGO-I/O-SYST EM)/Ans chli eßen/Leiter an C AGE C LAM P ans chli eßen ( allgemei n) - Übersc hrift 2 und Text @ 3\mod_1225448660171_21.doc x @ 24928 @ 2 @ 1
If more than one conductor must be routed to one connection, these must be
connected in an up-circuit wiring assembly, for example using WAGO feed-
through terminals.
Exception:
If it is unavoidable to jointly connect 2 conductors, then you must use a ferrule to
join the wires together. The following ferrules can be used:
Length: 8 mm
Nominal cross section max.: 1 mm2 for 2 conductors with 0.5 mm2 each
WAGO product: 216-103 or products with comparable properties
1. For opening the CAGE CLAMP® insert the actuating tool into the opening
above the connection.
3. For closing the CAGE CLAMP® simply remove the tool. The conductor is
now clamped firmly in place.
Manual
Version 1.2.0
32 Using Interference-Free Variants of I/O Modules in Safety Related ApplicationsWAGO-I/O-SYSTEM 750
750-530 8DO 24V DC 0.5A
Pos : 80.1 /Serie 750 (WAGO-I/O-SYST EM)/Eins atz in sicherheitsg erichteten Anwendung en/Ei nleitung - r üc kwir kungsfr eie Varianten @ 6\mod_1258973563064_21.doc x @ 44681 @ 1 @ 1
If the field side supply is shut down via a safety switching device, the safety
function of the module is not active.
When the interference-free I/O module is used correctly in a safety related
application, neither the SIL nor Performance Level achieved by the circuit nor the
category will be influenced.
This requires that you adhere to the following notes and connection diagrams!
Pos : 80.3 /Dokumentation allgemei n/Glieder ungs elemente/---Seitenwechs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1
Manual
Version 1.2.0
WAGO-I/O-SYSTEM 750 Using Interference-Free Variants of I/O Modules in Safety Related
Applications 33
750-530 8DO 24V DC 0.5A
Pos : 80.4 /Serie 750 (WAGO-I/O-SYST EM)/Eins atz in sicherheitsg erichteten Anwendung en/Hi nweise zum Ei nsatz i n Sicherheits anwendungen @ 6\mod_1258974811438_21.doc x @ 44688 @ 2 @ 1
1 Eins atz der rüc kwir kungsfrei en Digital ausg angs kl emme in Sic her heitsanwendungen
Umax < 32 V
Manual
Version 1.2.0
34 Using Interference-Free Variants of I/O Modules in Safety Related ApplicationsWAGO-I/O-SYSTEM 750
750-530 8DO 24V DC 0.5A
Pos : 80.6 /Serie 750 (WAGO-I/O-SYST EM)/Eins atz in sicherheitsg erichteten Anwendung en/Allgemeiner Aufbau ei ner Potenti algruppe - r üc kwir kungsfr eie Vari anten @ 6\mod_1258973074755_21.doc x @ 44664 @ 23 @ 1
Manual
Version 1.2.0
WAGO-I/O-SYSTEM 750 Use in Hazardous Environments 35
750-530 8DO 24V DC 0.5A
Pos : 82.1 /All e Seri en ( Allgemei ne Module)/Eins atz in Ex- Ber eichen/Eins atz in explosionsgefährdeten Bereic hen - Übersc hrift 1 @ 3\mod_1224075191281_21.doc x @ 24084 @ 1 @ 1
Manual
Version 1.2.0
36 Use in Hazardous Environments WAGO-I/O-SYSTEM 750
750-530 8DO 24V DC 0.5A
Pos : 82.4 /Serie 750 (WAGO-I/O-SYST EM)/Eins atz in Ex- Ber eichen/Beis piel hafter Aufbau der Kennz eic hnung - Übersc hrift 2 @ 3\mod_1224157499140_21.doc x @ 24182 @ 2 @ 1
Figure 12: Side Marking Example for Approved I/O Modules According to ATEX and IECEx
Figure 13: Text Detail – Marking Example for Approved I/O Modules According to ATEX and
IECEx.
Manual
Version 1.2.0
WAGO-I/O-SYSTEM 750 Use in Hazardous Environments 37
750-530 8DO 24V DC 0.5A
Table 18: Description of Marking Example for Approved I/O Modules According to ATEX and
IECEx
Printing on Text Description
TÜV 07 ATEX 554086 X Approving authority and certificate numbers
IECEx TUN 09.0001 X
Dust
II Equipment group: All except mining
3D Category 3 (Zone 22)
Ex Explosion protection mark
tc Dc Type of protection and equipment protection
level (EPL):protection by enclosure
IIIC Explosion group of dust
T 135°C Max. surface temperature of the enclosure
(without a dust layer)
Mining
I Equipment group: Mining
M2 Category: High level of protection
Ex Explosion protection mark
d Mb Type of protection and equipment protection
level (EPL): Flameproof enclosure
I Explosion group for electrical equipment for
mines susceptible to firedamp
Gases
II Equipment group: All except mining
3G Category 3 (Zone 2)
Ex Explosion protection mark
nA Gc Type of protection and equipment protection
level (EPL): Non-sparking equipment
nC Gc Type of protection and equipment protection
level (EPL): Sparking apparatus with protected
contacts. A device which is so constructed that
the external atmosphere cannot gain access to the
interior
IIC Explosion group of gas and vapours
T4 Temperature class: Max. surface temperature
135°C
Pos : 82.7 /Dokumentation allgemei n/Glieder ungs elemente/---Seitenwechs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1
Manual
Version 1.2.0
38 Use in Hazardous Environments WAGO-I/O-SYSTEM 750
750-530 8DO 24V DC 0.5A
Pos : 82.8 /Serie 750 (WAGO-I/O-SYST EM)/Eins atz in Ex- Ber eichen/Beis piel bedruc kung der Ex-i- und IEC-Ex-i-zug elas senen Bus klemmen gemäß C ENELEC und IEC _2013 @ 14\mod_1360569320118_21.doc x @ 111298 @ @ 1
Figure 14: Side Marking Example for Approved Ex i I/O Modules According to ATEX and
IECEx.
Figure 15: Text Detail – Marking Example for Approved Ex i I/O Modules According to ATEX
and IECEx.
Manual
Version 1.2.0
WAGO-I/O-SYSTEM 750 Use in Hazardous Environments 39
750-530 8DO 24V DC 0.5A
Table 19: Description of Marking Example for Approved Ex i I/O Modules According to ATEX and
IECEx
Inscription Text Description
TÜV 07 ATEX 554086 X Approving authority and certificate numbers
IECEx TUN 09.0001X
Manual
Version 1.2.0
40 Use in Hazardous Environments WAGO-I/O-SYSTEM 750
750-530 8DO 24V DC 0.5A
Table 19: Description of Marking Example for Approved Ex i I/O Modules According to ATEX and
IECEx
Gases
II Equipment group: All except mining
3(1)G Category 3 (Zone 2) equipment containing a safety
device for a category 1 (Zone 0) equipment
3(2)G Category 3 (Zone 2) equipment containing a safety
device for a category 2 (Zone 1) equipment
Ex Explosion protection mark
nA Gc Type of protection and equipment protection level
(EPL): Non-sparking equipment
[ia Ga] Type of protection and equipment protection level
(EPL): associated apparatus with intrinsic safety
circuits for use in Zone 0
[ia Gb] Type of protection and equipment protection level
(EPL): associated apparatus with intrinsic safety
circuits for use in Zone 1
IIC Explosion group of gas and vapours
T4 Temperature class: Max. surface temperature 135°C
Pos : 82.9 /Dokumentation allgemei n/Glieder ungs elemente/---Seitenwechs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1
Manual
Version 1.2.0
WAGO-I/O-SYSTEM 750 Use in Hazardous Environments 41
750-530 8DO 24V DC 0.5A
Pos : 82.10 /Serie 750 ( WAGO-I/O-SYST EM)/Ei ns atz i n Ex-Bereic hen/Kennz eichnung für Ameri ka gemäß N EC 500 - Übersc hrift 3 @ 3\mod_1224158423187_21.doc x @ 24188 @ 3 @ 1
Figure 16: Side Marking Example for I/O Modules According to NEC 500
Figure 17: Text Detail – Marking Example for Approved I/O Modules According to NEC 500
Table 20: Description of Marking Example for Approved I/O Modules According to NEC 500
Printing on Text Description
CL I Explosion protection group (condition of use
category)
DIV 2 Area of application
Grp. ABCD Explosion group (gas group)
Op temp code T4 Temperature class
Pos : 82.12 /D okumentati on allgemei n/Gli ederungsel emente/---Seitenwec hs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1
Manual
Version 1.2.0
42 Use in Hazardous Environments WAGO-I/O-SYSTEM 750
750-530 8DO 24V DC 0.5A
Pos : 82.13 /Alle Serien (Allgemeine M odul e)/Ei ns atz i n Ex-Bereic hen/Errichtungsbes timmungen - Ü bersc hrift 2 @ 3\mod_1232453624234_21.doc x @ 26370 @ 2 @ 1
For the installation and operation of electrical equipment in hazardous areas, the
valid national and international rules and regulations which are applicable at the
installation location must be carefully followed.
Pos : 82.15 /D okumentati on allgemei n/Gli ederungsel emente/---Seitenwec hs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1
Manual
Version 1.2.0
WAGO-I/O-SYSTEM 750 Use in Hazardous Environments 43
750-530 8DO 24V DC 0.5A
Pos : 82.16 /Serie 750 ( WAGO-I/O-SYST EM)/Ei ns atz i n Ex-Bereic hen/Besonder e Beding ung en für den sic her en Ex- Betrieb gem. AT EX-Z ertifi kat TÜV 07 ATEX 554086_X_2013_2 @ 15\mod_1368620071975_21.doc x @ 119778 @ 3 @ 1
Manual
Version 1.2.0
44 Use in Hazardous Environments WAGO-I/O-SYSTEM 750
750-530 8DO 24V DC 0.5A
Pos : 82.18 /Serie 750 ( WAGO-I/O-SYST EM)/Ei ns atz i n Ex-Bereic hen/Besonder e Beding ung en für den sic her en Ex- Betrieb gem. AT EX-Z ertifi kat TÜV 12 ATEX 106032x_2013_2 @ 15\mod_1368620479454_21.doc x @ 119782 @ 3 @ 1
Manual
Version 1.2.0
WAGO-I/O-SYSTEM 750 Use in Hazardous Environments 45
750-530 8DO 24V DC 0.5A
Pos : 82.20 /Serie 750 ( WAGO-I/O-SYST EM)/Ei ns atz i n Ex-Bereic hen/Besonder e Beding ung en für den sic her en Ex- Betrieb gem. IEC-Ex-Z ertifi kat TUN 09.0001 X_2013_2 @ 15\mod_1368620660911_21.doc x @ 119786 @ 3 @ 1
Manual
Version 1.2.0
46 Use in Hazardous Environments WAGO-I/O-SYSTEM 750
750-530 8DO 24V DC 0.5A
Pos : 82.22 /Serie 750 ( WAGO-I/O-SYST EM)/Ei ns atz i n Ex-Bereic hen/Besonder e Beding ung en für den sic her en Ex- Betrieb gem. IEC-Ex-Z ertifi kat TUN 12.0039 X_2013_2 @ 15\mod_1368620821493_21.doc x @ 119790 @ 3 @ 1
Manual
Version 1.2.0
WAGO-I/O-SYSTEM 750 Use in Hazardous Environments 47
750-530 8DO 24V DC 0.5A
Pos : 82.24 /Serie 750 ( WAGO-I/O-SYST EM)/Ei ns atz i n Ex-Bereic hen/Errichtungsbesti mmung en AN SI ISA 12.12.01_2013_2 @ 15\mod_1368620942842_21.doc x @ 119794 @ 3 @ 1
Pos : 82.26 /D okumentati on allgemei n/Gli ederungsel emente/------Leerz eile------ @ 3\mod_1224662755687_0.doc x @ 24460 @ @ 1
Pos : 82.27 /D okumentati on allgemei n/Gli ederungsel emente/------Leerz eile------ @ 3\mod_1224662755687_0.doc x @ 24460 @ @ 1
Pos : 82.28 /Serie 750 ( WAGO-I/O-SYST EM)/Ei ns atz i n Ex-Bereic hen/Infor mati on: Zer tifizier ungs nachweis @ 7\mod_1274279547729_21.doc x @ 56649 @ @ 1
Additional Information
Proof of certification is available on request.
Also take note of the information given on the operating and assembly
instructions.
The manual, containing these special conditions for safe use, must be readily
available to the user.
=== Ende der Liste für T extmar ke Inhalt_mitte ===
Manual
Version 1.2.0
48 List of Figures WAGO-I/O-SYSTEM 750
750-530 8DO 24V DC 0.5A
Pos : 84 /D okumentation allgemei n/Verz eic hniss e/Abbil dungs verz eic hnis - Übersc hrift oG und Verz eichnis @ 3\mod_1219222916765_21.doc x @ 21080 @ @ 1
List of Figures
Figure 1: View ....................................................................................................... 15
Figure 2: Data Contacts ......................................................................................... 16
Figure 3: Power Jumper Contacts ......................................................................... 17
Figure 4: CAGE CLAMP® Connectors................................................................. 19
Figure 5: Display Elements ................................................................................... 20
Figure 6: Schematic Diagram ................................................................................ 21
Figure 7: Insert I/O Module (Example) ................................................................. 29
Figure 8: Snap the I/O Module into Place (Example) ........................................... 29
Figure 9: Removing the I/O Module (Example) ................................................... 30
Figure 10: Connecting a Conductor to a CAGE CLAMP® ................................... 31
Figure 11: Potential Group for Safety Related Applications ................................ 34
Figure 12: Side Marking Example for Approved I/O Modules According to
ATEX and IECEx ........................................................................................ 36
Figure 13: Text Detail – Marking Example for Approved I/O Modules According
to ATEX and IECEx. ................................................................................... 36
Figure 14: Side Marking Example for Approved Ex i I/O Modules According to
ATEX and IECEx. ....................................................................................... 38
Figure 15: Text Detail – Marking Example for Approved Ex i I/O Modules
According to ATEX and IECEx. ................................................................. 38
Figure 16: Side Marking Example for I/O Modules According to NEC 500 ....... 41
Figure 17: Text Detail – Marking Example for Approved I/O Modules According
to NEC 500 .................................................................................................. 41
Manual
Version 1.2.0
WAGO-I/O-SYSTEM 750 List of Tables 49
750-530 8DO 24V DC 0.5A
Pos : 86 /D okumentation allgemei n/Verz eic hniss e/Tabell enverz eichnis - Übersc hrift oG und Verz eichnis @ 3\mod_1219222958703_21.doc x @ 21084 @ @ 1
List of Tables
Table 1: Variants ..................................................................................................... 5
Table 2: Number Notation ....................................................................................... 8
Table 3: Font Conventions ...................................................................................... 8
Table 4: Legend for Figure “View” ...................................................................... 15
Table 5: Legend for Figure “Power Jumper Contacts” ......................................... 17
Table 6: Legend for Figure “CAGE CLAMP® Connectors” ................................ 19
Table 7: Legend for Figure “Display Elements” .................................................. 20
Table 8: Technical Data ‒ Device ......................................................................... 22
Table 9: Technical Data ‒ Power Supply .............................................................. 22
Table 10: Technical Data ‒ Communication ......................................................... 22
Table 11: Technical Data ‒ Inputs ........................................................................ 22
Table 12: Technical Data – Field Wiring .............................................................. 23
Table 13: Technical Data – Power Jumper Contacts ............................................ 23
Table 14: Technical Data – Data Contacts ............................................................ 23
Table 15: Technical Data – Climatic Environmental Conditions ......................... 23
Table 16: Ship Approvals ...................................................................................... 25
Table 17: Output Bits ............................................................................................ 27
Table 18: Description of Marking Example for Approved I/O Modules According
to ATEX and IECEx .................................................................................... 37
Table 19: Description of Marking Example for Approved Ex i I/O Modules
According to ATEX and IECEx .................................................................. 39
Table 20: Description of Marking Example for Approved I/O Modules According
to NEC 500 .................................................................................................. 41
=== Ende der Liste für T extmar ke Verzeic hnis_hi nten ===
Manual
Version 1.2.0
Pos : 88 /D okumentation allgemei n/Einband/Einband H andbuc h - Leers eite für durc h 2 teilbar e Seitenzahl (Standar ddr uc k) @ 3\mod_1219230851078_0.doc x @ 21123 @ @ 1