Professional Documents
Culture Documents
Fbo Vebeo Fittings
Fbo Vebeo Fittings
O-ring :
tightness is ensured with one elastic
o-ring designed for each type of
application
ADVANTAGES
Washer :
for elastic o-ring protection OF THE ®
Ring :
gripping is ensured with a round-ring
or split tapered ring appropriate
FITTING
to the tube material.
A wide line of compression fittings
used for decades in many fields :
- in high vibration and shock
environments.
- requiring security (braking systems,
radio-protection...).
The never-failing reliability of vebeo ®
fittings has led to the international
reputation of the vebeo ® brand name.
Since 1994 the vebeo ® production
has been guaranted by ISO 9001
certification and has been using the
most modern producing equipment
(computer assisted production
management, CAD, CAM).
Ease of assembly ensures time
savings when fitting the tubes :
- No other preparation than deburring
the end of the tube (no threading, no
welding, no flanging).
- Out of square for tube is accepted
up to 5°.
- Setting without any special tool
(2 wrenches are all that is required).
Restricted caution
- Only tightening torque must be
adhered to (see table page 4).
MISALIGNMENT
(MAX 3°)
JOINING OF ASIMILAR
MATERIALS
HIGH VIBRATION
RESISTANCE
MATERIAL
SAVINGS
FULLY REUSABLE
«vebeo ®» fittings
■ Technical features
O-RING TEMPERATURE FBO ’ s AIR WATER WATER PETROLEUM BRAKING MINERAL BUTANE NATURAL OZONE
MATERIALS (O-ring using limit) DESCRIPTION LIQUID OIL PROPANE GAS
80° 150° glycol basis GASES
FBO is responsible of sealing choice at the only condition that the nature and fluid composition, temperature, pressure, ... have been previously
determined.
STORAGE DIRECTIVES
Because of the sealing ring, fittings must be stored according to the NFT 47-507 Norm.
● Prevent goods and packing from daylight and high artificial light.
● A special care must be taken on sealings, which are mounted on threaded sides.
ø TUBE mm 6 8 10,2 12 13,5 16 17,2 18 20 21,3 22 25 26,9 28 30 33,7 38 42,4 48,3 60,3
inch BS 1/8 1/4 3/8 1/2 3/4 1’’ 1’’1/4 1’’1/2 2’’
This pressure information is given for ambient temperature and working conditions without any pressure shocks, after respecting
the assembly instructions.
Safety factor with regard to static pressure : 2,5
NUCLEAR : CEA
VIBRATION TEST : SNCF (STM 820.A)
CEI 61373 MOTOR CAR : PSA - RENAULT
2
«vebeo ®» fittings
■ Technical features
STANDARDS
TUBES : check that the diameters and tolerances of tubes are compatible with the fitting sizes.
(dimension as reference = internal diameter of the washer - see page 26 «washer table»).
THREADS (for the fittings to be mounted on apparatuses) : ISO, BS, ANSI standards.
When threads are according to the DIN standard, please used the corresponding leaflet.
TUBE mm 6 8 10 12 14 15-16 18 20 22 25 28 30 38
inch BS 1/8 1/4 3/8 1/2 3/4 1’’ 1’’1/4 1’’1/2 2’’
STEEL /
3,2 4 4,7 5 6 7 8 9,5 9,5 10 10 12,5 14 14 16 18 22 25 30 42
STAINLESS STEEL
COPPER 1,6 2 2,5 2,8 3,2 3,6 4 4,8 4,8 5 5 6,3 7 7 8 9 11 12,5 15 21
TUBE mm 6 8 10 12 14 15-16 18 20 22 25 28 30 38
inch BS 1/8 1/4 3/8 1/2 3/4 1’’ 1’’1/4 1’’1/2 2’’
MINI TUBE
THICKNESS mm 1 1 - 1 - 1,5 - 1,5 1,5 - - - - 1,5 - - - - - -
STEEL /
STAINLESS STEEL 2,2 4 - 5 - 5 - 8 8 - - 9 - 10,5 - - - - - -
When connecting a male side, the hexagonal part of the fitting must be tightened until it compresses the application.
INSTALLATION INSTRUCTIONS
1 5 3 4 1 - Deburr the end of the tube, and if necessary suppress grease, paint or varnish
3 - Put the tube into fitting with length slightly inferior to L/2
L/2 L 4 - Screw the nut according to tightening torques table.
2
Nota : tubes must be flanged before the nut is being tightened.
4
«vebeo ®» fittings
■ Description code ■ Order code
THE FITTING OF YOUR CHOICE CAN BE DEFINED THROUGH ITS DESCRIPTION CODE (LETTERS) OR ITS ORDER CODE (NUMBERS)
■ Description code : it is necessary to specify ■ The fitting type (U = Straight union, ...)
■ The fitting material (AC = cationic electropaint steel, ...)
■ The dimensions (tube and thread)
■ The gripping components (JAB = yellow zinc coated round-ring + yellow zinc coated washer, etc ...)
■ Order code : it is necessary to state the various features of fitting with groups of numbers.
XX XX - X XX - XX XX
FITTING M A T E R I A L DIMENSIONS
TYPE BODY-NUT O-RING GRIPPING COMPONENTS
AZ = White zinc coated steel = 16 JS = Silicone = 3 BX = Split tapered ring + Washer = 24 Threads :
304L stainless steel - ISO
- Gas (BSPP, BSPT)
See from - Briggs (NPT)
pages X = Stainless steel 304L = 20 JE = EPDM = 4 BSX = Grooved split tapered ring + Washer= 34
8 to 26 304L stainless steel
Example : elbow in cationic steel diameter 25 with nitrile o-rings, yellow zinc coated split tapered ring and washer.
Description : EAC JN BAB 25 - Codification : 5013-122-2500 or 5013-120-2500
Should you need any additional information, please do not hesitate to contact us.
The order codes mentioned in the tables correspond to fittings equiped with round rings for gas tubes and with split tapered rings for metric tubes.
5
«vebeo ®» fittings
■ Illustration of the codification
On request, FBO can manufacture the reducing fittings following the illustrations here after.
To define a fitting, take care to the reading instruction A, B, C, then D.
6
«vebeo » fittings ®
Parallel male union Taper male union Parallel male union full pass Taper male union full pass
Page 10 Page 11 Page 12 Page 13
Parallel / Taper female union Parallel male stem adaptor Taper male stem adaptor Female stem adaptor
Pages 14-15 Page 16 Page 17 Pages 18-19
Equal Y branch Parallel male elbow Taper male elbow Single banjo - Banjo reducer
Page 21 Page 22 Page 23 Page 24
7
«vebeo ®» fittings
■ Straight union ■ Reducing union
STRAIGHT UNION
Tube O.D. A B L Weight (g) Order code
mm inch steel brass steel
U 6 17 14 33 41 47 0013-120-0600
8 19 17 33 51 58 0013-120-0800
10 22 19 35 67 77 0013-120-1000
12 24 22 38 73 83 0013-120-1200
14 27 24 38 98 112 0013-120-1400
15 27 24 42 115 132 0013-120-1500
16 30 27 42 128 147 0013-120-1600
18 30 27 44 112 128 0013-120-1800
20 32 30 47 128 147 0013-120-2000
22 36 36 48 176 202 0013-120-2200
25 41 36 47 226 259 0013-120-2500
28 46 41 48 305 350 0013-120-2800
30 46 46 55 390 448 0013-120-3000
35 50 46 58 350 402 0013-120-3500
38 55 50 58 410 471 0013-120-3800
For ordering : 40 60 55 56 515 592 0013-120-4000
The fitting with the order code 0013-120-0800
is also defined by the description number :
44.5 65 65 65 715 822 0013-120-4400
U AC 8 JN BA
10.2 1/8 22 19 37 70 80 0013-110-7100
Steel split tapered ring 13.5 1/4 27 24 38 95 109 0013-110-7200
NBR O-ring - 30° C
Ø 8 mm 17.2 3/8 30 27 43 123 141 0013-110-7300
Cationic electropaint steel 21.3 1/2 36 32 46 190 218 0013-110-7400
Straight union 26.9 3/4 46 41 48 310 356 0013-110-7500
33.7 1’’ 50 46 55 380 437 0013-110-7600
42.4 1’’1/4 65 60 63 698 802 0013-110-7700
48.3 1’’1/2 70 65 67 774 890 0013-110-7800
60.3 2’’ 85 80 78 1332 1531 0013-110-7900
REDUCING UNION
Tube O.D. A Ad B LD LF LT Weight (g) Order code
mm inch mm/inch steel brass steel
UR 8 6 19 17 17 19 13.5 16 47 54 0113-120-0806
10 8 22 19 19 20 13.5 17 60 69 0113-120-1008
12 10 24 22 22 22 15 18 71 81 0113-120-1210
14 12 27 24 24 22 15 18 78 89 0113-120-1412
15 12 27 24 24 25 15 18 92 105 0113-120-1512
16 14 30 27 27 24 15 20 115 132 0113-120-1614
18 16 30 30 27 25 17 22 118 135 0113-120-1816
20 18 32 30 30 28 19 23 123 141 0113-120-2018
22 20 36 32 36 28 19 24 167 192 0113-120-2220
25 22 41 36 36 28 19 23 206 236 0113-120-2522
28 25 46 41 41 29 19 23 276 317 0113-120-2825
30 28 46 46 46 33 19 27 354 407 0113-120-3028
35 32 50 50 46 34 22 28 350 402 0113-120-3532
38 30 55 46 50 35 22 28 403 463 0113-120-3830
40 38 60 55 55 34 23 27 502 577 0113-120-4038
For ordering : 44.5 38 65 55 65 41 23 33 610 701 0113-120-4438
The fitting with the order code 0113-110-7271
is also defined by the description number :
UR AC 1/4-1/8 JN JA 13.5 1/4 1/8 27 22 24 22 15 18 73 83 0113-110-7271
17.2 3/8 1/4 30 27 27 25 15 21 111 127 0113-110-7372
Steel round ring 21.3 1/2 3/8 36 30 32 27 18 22 165 189 0113-110-7473
NBR O-ring - 30° C
Ø 1/4 - 1/8 26.9 3/4 1/2 46 36 41 29 18 23 269 309 0113-110-7574
Cationic electropaint steel 33.7 1’’ 3/4 50 46 46 33 19 27 318 365 0113-110-7675
Reducing union 42.4 1’’1/4 1’’ 65 50 60 39 22 31 564 648 0113-110-7776
48.3 1’’1/2 1’’1/4 70 65 65 41 23 33 741 852 0113-110-7877
60.3 2’’ 1’’1/2 85 70 80 49 25 38 1131 1300 0113-110-7978
The above listed order codes
are for standard fittings.
Other materials, sizes and equipment
can be realised on request.
8
«vebeo ®» fittings
■ Bulkhead union ■ End tube plug
BULKHEAD UNION WALL THICKNESS 3 to 10 MM
Tube O.D. A B M L E Weight (g) Order code
mm inch steel brass steel
PC 6 17 19 47 19 15 68 78 1513-120-0601
8 19 22 48 20 17 83 95 1513-120-0801
10 22 24 52 22 19 108 124 1513-120-1001
12 24 27 53 22 22 121 139 1513-120-1201
14 27 30 55 24 24 161 185 1513-120-1401
15 27 30 60 27 25 182 209 1513-120-1501
16 30 32 60 26 26 203 233 1513-120-1601
18 30 32 62 27 28 104 119 1513-120-1801
20 32 36 63 28 30 222 255 1513-120-2001
22 36 41 66 30 34 313 359 1513-120-2201
25 41 41 65 29 37 333 382 1513-120-2501
28 46 46 67 30 39 447 514 1513-120-2801
30 46 50 73 34 43 609 700 1513-120-3001
35 50 55 76 36 47 540 621 1513-120-3501
38 55 60 79 39 50 728 837 1513-120-3801
For ordering : 40 60 60 77 38 53 815 937 1513-120-4001
The fitting with the order code 1513-120-0601
is also defined by the description number :
44.5 65 70 82 40 61 1131 1300 1513-120-4401
PC AC 6 S10 JN BA
10.2 1/8 22 24 52 22 19 106 121 1513-110-7101
Steel split tapered ring 13.5 1/4 27 30 55 24 24 170 195 1513-110-7201
NBR O-ring - 30° C
Tube Ø 6 (wall thickness 17.2 3/8 30 32 61 27 27 209 240 1513-110-7301
3 to 10 mm) 21.3 1/2 36 41 64 29 33 312 358 1513-110-7401
Cationic electropaint steel 26.9 3/4 46 46 66 30 39 449 516 1513-110-7501
Bulkhead union
33.7 1’’ 50 55 73 34 47 580 667 1513-110-7601
42.4 1’’1/4 65 65 80 39 59 1138 1308 1513-110-7701
48.3 1’’1/2 70 75 86 41 64 1112 1278 1513-110-7801
E = minimum boring diameter for the wall 60.3 2’’ 85 85 100 49 77 1742 2003 1513-110-7901
EQUAL TEE
Tube O.D. A B L LT Weight (g) Order code
mm inch steel brass steel
T 6 17 17 28 21 60 69 3013-120-0600
8 19 17 28 20 75 86 3013-120-0800
10 22 17 29 19 95 109 3013-120-1000
12 24 19 34 23 130 149 3013-120-1200
14 27 19 34 23 150 172 3013-120-1400
15 27 24 34 23 180 207 3013-120-1500
16 30 24 37 24 200 230 3013-120-1600
18 30 24 38 25 229 263 3013-120-1800
20 32 30 44 28 235 270 3013-120-2000
22 36 30 44 26 295 339 3013-120-2200
25 41 36 47 27 445 511 3013-120-2500
28 46 36 47 26 633 727 3013-120-2800
30 46 41 52 30 750 862 3013-120-3000
35 50 46 57 31 800 920 3013-120-3500
38 55 50 61 36 948 1090 3013-120-3800
For ordering : 40 60 50 60 29 1050 1207 3013-120-4000
The fitting with the order code 3013-120-0800
44.5 65 60 69 36 1144 1315 3013-120-4400
is also defined by the description number :
T AC 8 JN BA
10.2 1/8 22 17 28 19 93 106 3013-110-7100
Steel split tapered ring 13.5 1/4 27 19 34 23 160 184 3013-110-7200
NBR O-ring - 30°C
Tube Ø 8 mm 17.2 3/8 30 24 38 24 211 242 3013-110-7300
Cationic electropaint steel 21.3 1/2 36 30 43 25 302 347 3013-110-7400
Equal tee 26.9 3/4 46 36 47 26 550 632 3013-110-7500
33.7 1’’ 50 46 56 35 663 762 3013-110-7600
42.4 1’’1/4 65 50 61 30 1358 1561 3013-110-7700
The above listed order codes
are for standard fittings.
48.3 1’’1/2 70 60 69 36 1474 1695 3013-110-7800
Other materials, sizes and equipment 60.3 2’’ 85 70 80 47 2991 3439 3013-110-7900
can be realised on request.
20
«vebeo ®» fittings
■ Equal cross ■ Equal Y branch
EQUAL CROSS
Tube O.D. A B L LT Weight (g) Order code
mm inch steel brass steel
C
6 17 17 28 21 75 86 4013-120-0600
8 19 17 28 20 115 132 4013-120-0800
10 22 17 29 19 150 172 4013-120-1000
12 24 19 34 23 175 201 4013-120-1200
14 27 19 34 23 190 218 4013-120-1400
15 27 24 34 23 245 281 4013-120-1500
16 30 24 37 24 303 348 4013-120-1600
18 30 24 38 25 337 387 4013-120-1800
20 32 30 44 28 360 414 4013-120-2000
22 36 30 44 26 440 506 4013-120-2200
25 41 36 47 27 600 690 4013-120-2500
28 46 36 47 26 811 932 4013-120-2800
30 46 41 52 30 980 1127 4013-120-3000
35 50 46 57 31 1220 1403 4013-120-3500
38 55 50 61 36 1548 1780 4013-120-3800
For ordering : 40 60 50 60 29 1660 1909 4013-120-4000
The fitting with the order code 4013-110-7100
is also defined by the description number :
44.5 65 60 69 36 1807 2078 4013-120-4400
C AC 1/8 JN JA
10.2 1/8 22 17 28 19 147 169 4013-110-7100
Steel round ring
13.5 1/4 27 19 34 23 200 230 4013-110-7200
NBR O-ring - 30° C
Tube Ø 1/8 17.2 3/8 30 24 38 24 302 347 4013-110-7300
Cationic electropaint steel 21.3 1/2 36 30 43 25 430 494 4013-110-7400
Equal cross 26.9 3/4 46 36 47 26 755 868 4013-110-7500
33.7 1 50 46 56 35 940 1081 4013-110-7600
42.4 1’’1/4 65 50 61 30 1929 2218 4013-110-7700
48.3 1’’1/2 70 60 69 36 2232 2566 4013-110-7800
60.3 2’’ 85 70 80 47 4579 5265 4013-110-7900
EQUAL Y BRANCH
Tube O.D. A B L LT a° I E Weight (g) Order code
mm inch steel brass steel
Y
16 30 24 37 24 36 54 14 298 342 3513-120-1600
18 30 24 38 25 36 55 16 301 346 3513-120-1800
25 41 41 52 23 36 70 21 1000 1150 3513-120-2500
28 46 41 52 24 36 70 24 1078 1239 3513-120-2800
30 46 41 53 24.5 36 71 26 1013 1164 3513-120-3000
38 55 45 36 25 30 89 34 1245 1431 3513-120-3800
For ordering :
The fitting with the order code 3513-110-7300
is also defined by the description number :
Y AC 3/8 JN JA
We reserve the right to make modifications to the design and manufacture of our products without previous notification.
mm inch steel I.D. O.D. I.D.(H12)
EC JT RD 6 17 10.5 10 4.9 1.9 4 12.6 6.2 1.2
8 19 10.5 10 7.2 1.9 6 14.6 8.2 1.2
10 22 12 20 8.9 1.9 7 16 10.2 1.5
L Tore E 12 24 12 20 10.5 2.7 9 18.9 12.2 1.5
14 27 12 30 13.6 2.7 11 20.9 14.2 1.5
15 27 13 25 13.6 2.7 11 21.9 15.2 1.5
16 30 13.5 36 15.1 2.7 12 22.9 16.2 2
ø O.D.
ø I.D.
Plant :
Route de Villiers
F-52260 ROLAMPONT
Tél. : +33 (0) 325 84 34 83
Fax : +33 (0) 325 84 34 88
E-mail : snfbo@snfbo.com
Web : www.snfbo.com
ID. NR : FR68 411 610 918
Ed. 2006/07 GB