GPmark™ DETAIL Xmark™ DETAIL
———ever Amar ECIAL ja 5432 SRE
(BOK CONNECTION LENGTH) DETAIL B
— ~
’ 0108
See Note 2 See Benchmark
2.625 Min.
PRIMARY MAKE-UP Pit Free Zone See Detail B
\ Bevel da. , SHOULDER(SEAL) See Nee 8
0.125
BENCHMARK Le
y
3 —4
(
See Note 2
oe
$7.48 lin |
NOTES: sree | 96886 2808 SECONDARY WAKE-UP
1. Lead tolerance: Chav ba ER | $5594 Re. Din
a. For 2 inches +0.006 inch “(INTERNAL WECHANTCAL
b. Recut threads if stretch exceeds 0.006 inch in 2 inches. 91.703 Oi, ro STOP)
2. Either benchmark type is applicable but not both. Bevel Dia.
«a. GPmark: 0.125 is new condition, shall be 0.062 min, after refacin.
b, Yrnark: 0.065 is new condition. After refacing a visible step
an the benchmark shall remain on the primary shoulder.
Rethreading is required i there is no visible benchmark ———
3. At Outside Diameter less thon 7.750 bevel diameter is void
and 1/32" x 45° becomes effective
4. Minimum 0.0. based on wall thickness at counterbore. Larger 0.0. Leda
may be required for specific grade performance. See Note 3
5, Surface finish requirement only applies during refacing operation
6. Area of the connection where ping is not permitted in the thread roots,
Break Edge Thread taper 2.000 per tt.
1/32" Max. x 45° Ref. 4 Threads per inch
a8] |glgis ‘ DIMENSIONS wTHOUT|
=| jsaeeis Grant Pridecoy yo ceayces axe | ce0S™ 65 SRT™/uGPDS™ 65 Box
eee “To glIN@Y Wetistaes | FOR REFERENCE | FIELD INSPECTION DIMENSIONS
By Bi sale INFORMATION. ONLY
| 3 oct RD POT $$
Date: bE | lel FPeeemeai ache [oor aoe 1” 1H/01 Toft [05