Professional Documents
Culture Documents
To create a sweep:
1. Sketch a closed, non-intersecting profile on a plane or a face.
If you use guide curves:
Create the path first if you want to add pierce relations between the path and a
sketch point on the profile.
Create the guide curve first if you want to add pierce relations between the guide
curves and a sketch point on the profile.
2. Create the path for the profile to follow. Use a sketch, existing model edges, or curves.
1 = Profile
2 = Path
3. Click one of the following:
Swept Boss/Base on the Features toolbar or Insert > Boss/Base > Sweep
Swept Cut on the Features toolbar or Insert > Cut > Sweep
Swept Surface on the Surfaces toolbar or Insert > Surface > Sweep
4. In the PropertyManager:
6. Click OK .