DECORA
PVC WATERSTOPS
CRD C570, C571, C572, C573
ASTM D638, D746, D747, D2240
DESCRIPTION
Flexible PYC (Thermoplastic) Waterbars to seal construction
‘and expansion joints in concrete structures. Various Types of
DECORA waterstops are available indifferent sizes depending
on their intended use.
DECORA PVC WATER STOPS
are used to seal construction and expansion joints in water
re
spillways, canals, swimming pools, sewage tanks etc. as well
as to keep water out of concrete structures such as basements,
underground car parks, tunnels, subways retaining walls etc.
‘TECHNICAL DATA
Properties of | Test | Typieal
N.C Weterstops| Method | Values
ing structures such as reservoirs, water towers, dams,.
‘timate Bogan | asTuD Es | 250% mie
tees
Totesrengh | asmupes | srs0pe
femora) [287 mon wl
Loetenperatie | astup rs | No Face
‘eens femmes) Je-asnare)
‘seas in asuore | scape!
Penwe ewmesrs) | 276 aa mie
spacieGerly | asuomm | t3rmee
areas, asunz20 | 70.00= Method of Fixing / Jointing
Decora PVC waterstops are made from thrmoplastic PVC and therefore can
be welded at the joints. They are welded by using heating blades while
holding in proper clamping jigs. They are installed with the help of wires to
the reinforcement by means of eyelet provided in the edge flanges.
Waterstops can be placed on concrete surface or on shuttering through the
eyelet. Decora Waterstops are easy fo cut or connect and can be applied to
all Points including level Joint, Vertical Joints etc.
Cutting
Decora waterstops are quite long and can be cut easily as per requirement
with an ordinary sharp knife, saw or other sharp tools. Decora waterstops
melt at temperature above 180°C. It can easily be connected by means of
melting and welding.
= a) Melting Method
This method is applied to the connection of straight lines. The time required
for the connections is three fo four minutes. First, sections of two waterstops
intended to be connected are pressed against heated iron sheet and when
they are melted, the two are combined. After joining, they must be cooled.
= b) Welding Method
This method is applied to all connection works such as T type, Cross Type,
L Type and so on. The time required for connection is about fifteen minutes.
Welding rod of same material as the Decora waterstop is heated and
melted at the same time with the help of hot air gun.
Testing
Decora waterstops are being tested through different Laboratories.+ Decora PVC Waterstop intemal Profiles
Internal Enponson Join (sections ae used in expansion joins.
The centre bul cllows for cical movement in the structure and
fas fl econ or sein of ganna files ond
formwork.
pebeQteh
tH Ot++
Internal Consrucion Joint (1!) plan web sections oe used in
constucion joins Got exci oe incre fo give
‘0 positve area fo locate formwork ond control gros loss,
mets
tm
1 External Profiles
External Esparsion Jon (El) seions ore used in enposion join.
The cente box allows movement accommodation ond ha alt
{op secon for esy sealing of expansion cin files ond formwork.
Jot DL
{Sone
Exeal Conon it El sein ore use in coson
joints and incorporate grout exuding fins to give o postive orea
to locale forerk nd control grovt ass,
LLL_LL
LL_itL
For Construction Joints
For Expansion
Joints
| erent
& Waterson
s
s
gan rp
Q sar
5
i
t
£
&
3
§
& 0s49
i
540mm
540mm
540 mm. ——— =
DS-03 pee Ce
oe |
DS-05 ——- = @
DS- 07 TI I I I
0-00 oT
mg) DECOR
PLASTIC INDUSTRIES
Head Office: RB 2, Ground Floor Awami Complex Usman Block New Garden Town Lahore Pakistan
‘Tel:+92 (42) 35838181, 35864647, Cell: 0300-7588882, 0300-8454641
Email: decoraplastic@yahoo.com, Web:decora,com.pk