Product Description: AT-XXX17S4-012-CMCA - Maximum Span 80 m
Loading Conditions: NESC LIGHT
Ice Thickness 0 mm 0 in. 0.0 N Wind Pressure 431 N/m^2 (95.5 km/hr) 9 psf (59.3 MPH) 26.5 m/s Temperature -1.1 C 30 F Safety Factor 0.73 N/m 0.1 lb/ft Tension @ Maximum Span for 1.5 % Installation Sag Short Term 138 kg 304 lb 1351 N Long Term 38 kg 85 lb 377 N Specifications: Maximum Span 80 m 262 ft Cable Weight 0.058 kg/m 0.039 lb/ft Cable Diameter 9 mm 0.353 in Installation Temp 20 C 68 F Cable Modulus 579 kg/mm^2 823.7 kpsi Linear Expansion Coefficient 0.00000876 1 / C 0.00000487 1 / F Estimated Break Load 549 kg 1211 lb 5442 N Maximum Cable Length: Dependent on construction and/or fiber type Singlemode 7,700 m 25,262 ft 62.5/125 Multimode 7,700 m 25,262 ft No Loading @ Install Temperature: 20 C All Loading Conditions @ Temperature: -1.1 C Span Sag Install Sag Tension Vertical Sag Tension Vertical Sag Horizontal Sag Angle m m % kg % of Span kg m m Deg 50 0.8 1.50 24 0.4 98 0.2 1.5 82 80 1.2 1.50 38 0.5 138 0.4 2.7 82
Dead End Assembly: Slack Storage Devices:
Tyco: AS30-FDES-1205, Max. Tension: 2,400 lbs. (1,088 kg) Dielectric Version: Non-standard Tyco Product PLP: Non-standard PLP Dead End Heliformed Suspension Units (Line angle changes<= 30 degrees): Fixed Tangent Support (Line Angle Changes <= 20 deg & Spans <= 183 m): Tyco: Non-standard Suspension Unit Tyco: Non-standard FOSC Clamp PLP: Non-standard Suspension Unit PLP: Dielectric block: Product Not Available PLP: Product Not Available Aluminum Suspension with SRR rods, Max Span: 1200 feet PLP: Aluminum Support: Product Not Available Vibration Dampers, see Application Note 812 for recommendations: Suspended Support (Line Angle Changes <= 20 deg & Spans <= 183 m): Tyco: PSVD 0830-BE Tyco: Non-standard Suspended Clamp- Shipped with 5/8 in oval eye nut and anchor shackle PLP: 50502272 PLP: Aluminum Support without SSR: Product Not Available Down Lead Cushion & Abrasion Protector: Tyco: Non-standard Tyco DLC Low Tension / Short Span Hardware: PLP: PLP Dead End: 2875001TE, Max. Tension: 800 lbs. (362 kg) Tyco: F0AP-05-6 Length: 6 ft PLP Suspension: 4800110, Max.Span 300 ft ( 91 m) PLP: PTG-0201 Length: 6 ft Corona Coils, see Application Note 811 for recommendations: Tyco: Sized to fit appropriate hardware PLP: Sized to fit appropriate hardware
OFS PROPRIETARY: For the Exclusive Use of OFS and Customer Defined Above