Professional Documents
Culture Documents
Ministry of Research, Technology, and Higher Education, Republic Indonesia with Second Grade (Peringkat 2, Sinta 2)
since year 2017 to 2021 according to the decree No. 10/E/KPT/2019.
RESTI journal
(System Engineering and Information Technology)
Vol. x No. x (20xx) xx-xx ISSN Electronic Media: 2580-0760
Abstract
The abstract should briefly summarize the scope, objectives, methods, data, results and conclusions of the paper. The abstract
is to be in fully-justified italicized text, at the top of the paper with single column as it is here, below the author information.
Use the word “Abstract” as the title, in 10-point Times, boldface type, left relative to the column, initially capitalized. The
abstract is to be in 10-point, single-spaced type, and up to 250 words in length. Leave two blank lines after the abstract or list
three to five keywords related to the articles.
Keywords: are written in five words which should be a subset of the paper title, written in lowercase except for abbreviations,
and separated by commas.
© 20xx RESTI Journal
1. Introduction
The following is a guide to writing research paper in 2.2. Paper Organization
the Journal of RESTI (Systems Engineering and
Information Technology) published by the professional The title should be clear and concise. Author's name
organization, Ikatan Informatika Indonesia (IAII). The and their affiliation as written above. The author's name
manuscript is an unpublished text and the authors are is clearly written without a title. Heading numbering
fully responsible for the contents of the manuscript. [1, uses Arabic system with sub-heading up to 3 levels.
2]. 2.3. Tables
The article should consist of: 1. Introduction, 2. Tables should be numbered in the order of presentation
Research Method (including analysis, architecture, (Table 1, etc.). Table titles are written on the table with
methods used to solve problems, implementation), 3. the center justified. The font used is 8pt in both the title
Results and Discussion, 4. Conclusion, 5. of the table and the contents of the table. Tables should
Acknowledgments (if any) and List of Reference. be referenced in the text.
The content of the introduction is the answer to the Table 1. Software dan Hardware Supporting Table
question [3-7]: (1). Background, (2). Brief Literature Product Server Client
Review, (3). The reason of this study and (4). Question Clementine Solaris 2.X X Windows
of purpose. Darwin Solaris 2.X Windows NT
PRW Data on Windows NT
2. Research Method
2.4. Figures
Explain the method of preparation and characterization
techniques used. Describe briefly, but remain accurate Figures are numbered in the order of presentation
as size, volume, replication and workmanship (Figure 1, etc.). The title of the figures are placed under
techniques. For the new method should be explained in the figures with the center justified. The font used in
detail so that other researchers can reproduce the the title of the image is 8pt. Figures should be
experiment. While the established method can be referenced in the text.
explained by quoting a reference.
(1)
which F is base resonance frequency (MHz), M is
total mass of gas molekul absorbed (g)[1]. and A is the Figure 1. Database Mirroring Architecture
area of electroda (cm2) [8].
Program listing and algorithm design are written using 2.5. Reference
fixed width letters as the following: Reference should be written in the IEEE Referencing
Standard system. Everything listed in the reference
Sample of algorithm should be referenced in the text.
Input: mMG, Ed
Output: mMG
Initialization i, j 3. Result and Discussion
Get line, column, max
[line,column] = size(mMG) The results are written based on a logical order to form
max=0
for i = 1 to line do a story. It shows facts / data instead of discussing the
for j = 1 to column do results. Tables and Figures can be used but not
if max < mMG(i, j)
max = mMG(i, j) repeating the same data in the same image, table and
end if text. To further clarify the description, subtitles can be
end for
end for used.
RESTI Journal (System Engineering and Information Technology) Vol . x No. x (20xx) xx – xx
2
Author, Author
RESTI Journal (System Engineering and Information Technology) Vol. x No. x (20xx) xx – xx
Discussion is the basic explanation, relationship and application possibilities, implications and speculations
generalization shown by the results. The description as appropriate. If necessary, give suggestions for
answers the research questions. If there are dubious further research.
results, then show them objectively.
Acknowledgements [if any]
3.1. Specification
Mention the names of donors and helpers.
The Times New Roman typeface should be used
throughout the manuscript, with the font size as References
exemplified in this writing guide. Spaces are singular [1] Yuhefizar, Santosa B., Eddy I. K. P, and Suprapto Y. K. 2013.
and the contents of a text or script using left-right Combination of Cluster Method for Segmentation of Web
alignment (justified). Visitors. TELKOMNIKA, 11(1), pp. 207-214. doi:
http://dx.doi.org/10.12928/telkomnika.v11i1.906.
[2] Na`am J., Harlan J., Madenda S., and Wibowo E. P. 2016.
3.2. Page Size Identification of the Proximal Caries of Dental X-Ray Image
with Multiple Morphology Gradient Method. International
The page size is A4 (210 mm x 297 mm). The page Journal on Advanced Science, Engineering and Information
margin is 25 mm up-down, left and right. Technology (IJASEIT), 6(3), pp. 343-346.
doi:10.18517/ijaseit.6.3.827.
3.3. Text Layout [3] Na`am J., 2017. Edge Detection on Objects of Medical Image
with Enhancement multiple Morphological Gradient (EmMG)
An easy way to create layouts is to use this guide Method. 4th Proc. EECSI. 23-24 Sep. 2017. Yogyakarta:
Indonesia. doi=10.1109/EECSI.2017.8239085
directly.
3.4 Headings
Use style heading in this template directly. Style has
been formatted in such a way as to provide suitable
heading distance.
4. Conclusion
In conclusion there should be no reference. The Reference System using number format [1].
conclusion contains the facts obtained. State the
RESTI Journal (System Engineering and Information Technology) Vol . x No. x (20xx) xx – xx
3
Author, Author
RESTI Journal (System Engineering and Information Technology) Vol. x No. x (20xx) xx – xx
1. Book Reference
Reference Rule: Author, Initials/First name., Year. Title of book. Edition. Place of publication: Publisher.
Example:
Redman, P., 2006. Good essay writing: a social sciences guide. 3rd ed. London: Open University in assoc.
with Sage.
2. Journal Reference
Reference Rule: Author, Initials., Year. Title of article. Full Title of Journal, Volume number (Issue/Part
number), Page numbers.
Example:
Boughton, J.M., 2002. The Bretton Woods proposal: an in depth look. Political Science Quarterly, 42
(6),pp.564-78.
5. Dissertation Reference
Reference Rule: Author, Year of publication. Title of dissertation. Level. Place of University (If not clear
from the name of the University): Name of University.
Example:
Richmond, J., 2005. Customer expectations in the world of electronic banking: a case study of the Bank of
Britain. Ph. D. Chelmsford: Anglia Ruskin University.
6. Webpage Reference
Reference Rule: Authorship or Source, Year. Title of web document or web page. [Medium] (date of update)
Available at: include web site address/URL(Uniform Resource Locator) and additional details such as access
or routing from the home page of the source. [Accessed date].
Example:
National electronic Library for Health, 2003. Can walking make you slimmer and healthier? (Hitting the
headlines article) [Online] (Updated 16 Jan 2005)
Available at: http://www.nhs.uk.hth.walking. [Accessed 10 April 2005]
RESTI Journal (System Engineering and Information Technology) Vol . x No. x (20xx) xx – xx
4