Professional Documents
Culture Documents
2
5) Connect Tech2 to PC by RS-232 cable.
3
7) Turn on Tech2 and wait title screen, then turn on ignition with engine off.
4
Harness clip 8) Turn on PC and open program TIS2000.
10.3
11
6
12) Select Vehicle data as follows.
Sales maker Isuzu - General Export (General Export VIN)
Model TF
Model Year 2005 or 2006
Engine 2.5L L4 4JK1 or 3.0L L4 4JJ1
12
7
14) In case this caution info. is shown, confirm all of harnesses and cables connections
again, then click OK.
If it is shown again, turn off PC, Tech2, SW of SW-BOX and SW of power
supply.
Wait for 10 minutes and try again from "STEP 2".
8
15) In case ECM was replaced with new one before, caution info. will be shown
on PC display.
Click OK for closing caution info.
15
16) Reconfirm connection between PC and Tech2.
9
19) Input correct VIN ( Vehicle Indentification Number ) 17 Digits.
10
21) In case ECM was replaced with new one before, this will be shown on PC
display.
Select Engine, then click Next.
21
ECM P/No.
ECU Data
12
27) Confirm current ECM number and reprogramming ECM number.
27
15
36) Check ECM part number by using Tech2.
ECM P/No. will be changed after reprogramming.