Professional Documents
Culture Documents
12. Select the Mixer folder and drag it on top of the graph, and release the mouse button to place
the tags in the graph.
13. If necessary, configure the Trend Duration (time span) for 5 Minutes.
14. Save the new Trend as Mixer.aaTrend in the C:\Wonderware Training\Labs folder.
17. Select File / New, and add each Group to a new trend.
18. Click the Auto scale all tags button after each group is added to its new trend.
19. Save each trend with its respective name in the C:\Wonderware Training\Labs folder.
Wonderware Training
Lab 5 – Configure Public Groups and Trend Sets 4-51
20. For the IS Trend, configure the duration to 2 hours and stack the traces to create a better view
of the event and string tags. Note the string and event tag symbols:
SysDataAcqOverallIte
msPerSec (Analog)
SysPerfCPU0 (Analog)
SysStatusEvent (Event)
SysString (String)
SysTimeMin (Analog)
21. Select the All Filter tab to view the tags in the new Group folders.
The following figure shows all tags in the IS Group, including String and Event tags:
Wonderware Training
Lab 5 – Configure Public Groups and Trend Sets 4-53
24. Browse to the .aaTrend files previously created for this lab.
25. Highlight each Trend you created by holding Ctrl and clicking each file.
26. Click Open.
The files appear in the Trend set configuration dialog box.
27. Select Last 5 minutes from the Duration drop-down list.
28. Select File / Save.
29. Name the new trend set and click Save, saving it in the C:\Wonderware Training\Labs
folder.
The trends are now configured to show the last 5 minutes of data when printed or distributed.
Note: Clicking on File / Print would send the trend set to the default printer. Each trend will be
sent as a separate print job.
30. Click File / Exit to exit the Trend set configuration window.
Wonderware Training
Lab 5 – Configure Public Groups and Trend Sets 4-55
37. Close the open Trends, leaving ActiveFactory Trend open. Do not save your changes.
Wonderware Training
Lab 6 – Configure Time Offsets and Target Regions 4-57
Introduction
This lab demonstrates the use of the Time Offsets option and the Target Region option in the tag
Properties dialog box.
Objective
Upon completion of this lab, you will be able to:
z Start a New Trend
z Configure a Time Offset
z Trend one tag several times and configure Time Offset
z Configure a Target Region for a tag
Note: Use of this feature with large offset values will have a detrimental effect on performance
and query times.
Your instructor will supply the node names. Use the Tools / Servers menu command to
configure a connection to a different Historian.
Both tags will display identical traces:
Wonderware Training