You are on page 1of 1

BACK TO CHAPTER INDEX CHEVROLET SONIC 2012 BODY REPAIR MANUAL

TO MODEL INDEX

Wipers and Washers BODY SYSTEMS 0-4

Windshield Wiper System Module Replacement

Callout Component Name

Preliminary Procedures

1. Open and support the hood assembly.


2. Remove the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement .

Windshield Wiper System Module Bolt (Qty: 2)

Caution: Refer to
1
Fastener Caution .

Tighten
18 N·m (13 lb ft)

Windshield Wiper System Module

Procedure
2
1. Lift the wiper system module from the plenum brackets.
2. Disconnect the electrical connector from the windshield wiper motor.
3. Remove the windshield wiper system module from the plenum.

© 2011 General Motors. All rights reserved.

You might also like