Professional Documents
Culture Documents
Simplex 4903 Series (With Electronic Horn)
Simplex 4903 Series (With Electronic Horn)
Features
Description
For applications requiring audible/visible notification Audible/visible appliance combinations are available in a
with continuous horn tones, these Simplex 4903 series variety of visible intensity levels and with red or off-white
appliances combine a high intensity strobe with a low rectangular housings. Models are available for horizontal
current electronic horn. The horn output provides a or vertical mounting because a compound, multi-surface
steady, harmonically rich sound that can be easily coded reflector is used to provide symmetrical light output in the
by the controlling notification appliance circuit (NAC). key axis directions.
The combination horn and strobe can be wired to the The strobe lens assembly fits securely into its housing,
same NAC, or, for applications requiring separate audible providing a high integrity notification appliance that is
and visible circuits, jumpers located at the wiring impact and vandal resistant, and suitable for a variety of
terminals can be easily removed. applications.
© 1999 Simplex Time Recorder Co. All rights reserved. S4903-0009-2 1/99
Synchronized Strobes Application Reference
When multiple visible appliances and their reflections can Proper selection of visible notification is dependent on
be seen from one location, synchronized flashes reduce occupancy, location, local codes, and proper application
the probability of photosensitive reactions. Synchronizing of the National Fire Alarm Code (NFPA 72),
modules are available to control the flashes of Simplex ANSI/CABO A117.1, the appropriate model building
synchronized flash models* at a rate of 1 Hz using the code, BOCA, ICBO, or SBCCI, and the application
existing two wire visible notification appliance circuit guidelines of the Americans with Disabilities Act (ADA).
(NAC). (Refer to accessories on page 3 for synchronizing
modules.) Consult your local Simplex representative for assistance
in determining these requirements.
If standard strobe models are connected to a synchronized
NAC, they will operate in a free-running, unsynchronized
mode.
Visible Notification
Product ID/Operation Type Appliance Output
Housing Style Mounting Style
(effective candela)
1 Hz Standard 1 Hz Synchronized 15 30 110
4903-9236 4903-9422 X
Red
4903-9237 4903-9423 X
Rectangular
Horizontal
4903-9238 4903-9424 X
Wall Mount
4903-9241 X
Off-White Rectangular
4903-9242 X
4903-9239 X Vertical Wall Mount
Red Rectangular
4903-9240 X (typically for retrofit)
General Specifications
Housing Dimensions (with lens) 4 3/4” x 6 7/8” x 2 5/8” D (121 mm x 175 mm x 67 mm)
Depth into Box 11/16” (17 mm)
Connections Terminals for in/out wiring, #18 to #12 AWG, separable if required
Rated Voltage Range 23.5 to 29 VDC
Operating Voltage Range 18 to 32 VDC
Operating Temperature Range 32° F to 120° F (0° C to 49° C)
Humidity Range 10% to 95%, Non-condensing at 86° F (30° C)
Horn Specifications
Horn Current 16 mA @ 24 VDC
85 dBA @ 10 ft per UL Standard 464 reverberant room testing
Horn Output @ 24 VDC
93 dBA @ 10 ft per anechoic chamber testing
Frequency Output 2400 Hz to 3700 Hz sweep, modulated at 120 Hz rate
Visible Appliance Specifications
Flash Rate 1 Hz
15 candela models = 95 mA
Nominal Average Current @ 24 VDC
30 candela models = 125 mA
(candela is effective intensity)
110 candela models = 220 mA
Note box
orientation F
F I
I R
R E
E
Requires 4905-9939 Adapter Plate
2975-9145 Box
4905-9903 Adapter Plate 4905-9915/-9916
2975-9145 Box Existing 4" square Adapter Ring
outlet box on wall Note box
orientation
F F
I I A/V assembly
R R
E E 4" Square box
FIRE surface mounted
Surface Mount using 2975-9145 Box Surface Mount to 4" Box with Adapter Ring Extension
F F
I I
R R 4905-9939
E E Adapter Plate
Surface Mount
(requires adapter plates as shown)
4905-9923 Box 2975-9145 Box
F F
I I 4905-9903
R R Adapter Plate
E E
4905-9928
Adapter Plate 4905-9928
Adapter Plate
4905-9927
Wire Guard
F
I Semi-Flush Mount
R (no adapter plate required)
E
(Horizontal mounting is shown for reference. The 4905-9927 wire guard may be mounted horizontally or vertically.)
Simplex and the Simplex logo are registered trademarks of Simplex Time Recorder Co. in the U.S. and other countries.
S4903-0009-2 1/99
Gardner, Massachusetts 01441-0001 USA
visit us on the world wide web at www.simplexnet.com
All specifications and other information shown were current as of printing and are subject to change without notice.