\ as
. .OS
POLYMATE DEWATERING
ELEMENTS
PACIFIC POLYMERS & ENGINEERING CO.PACIFIC POLYMERS & ENGINEERING CO.
PACIFIC POLYMERS & ENGINEERING CO. is a professionally driven company established to take care
of the needs of Paper Mills across the world. The company is having well experienced qualified
engineers, designers, paper technologist with rich long experience in this field for last more than two
decades. Pacific Polymers with its technical knowhow brings tailored solutions to the wire part of
your paper machine manufacturing Dewatering Elements and also catering to various engineering
components manufactured as per customer drawing, In addition to this the company is pioneer in
developing Centricleaner systems and carry out Drainage Testing of paper machines with latest
equipments and competent engineers in the field. We have different grades of Dewatering Elements
catering to speeds , type of paper and GSM being produced by a mill. The economy virgin grade to
ceramic impregnated grades in ULTRA HIGH MOLECULAR WEIGHT POLYETHYLENE material all are
finished in CNC Machines on Sheets imported from Germany. The foils are extruded in order to
ensure perfect finish and fitment. We have tied up with leading global experts and consultants in the
field to bring in new born technology to serve paper mills backed by innovative design proven world-
‘over. We keep stock of items for paper mills who are interested for faster delivery and undergoes
annual rate contract with us. The company is geographically located in an excellent destination
convenient to reach out to all paper mills of Bangladesh, Thailand, Malaysia, Vietnam, Indonesia,
Philippines, Taiwan, Kuwait, Iran, Turkey apart from all paper mills across India. We manufacture the
elementsinthe brand name of POLYMATE.
z ___ Items manufactured for Pulp and Paper Industry.
~ Forming Board = __Sealing Strips for couch / press roll_| Gear for Dryers
‘Turbo Board __| End Deckles Centricleaner Nozzle
_Hydrofoils with T bars _ Doctor Blades LDC Cone
Single Foils Step Diffuser Block _ Air loading Tubes
[vacuum & Gravity Foils | Fabricuris = ‘Wear plates for Drum filters,
‘Wet / Dry Suction Box Tops | Dandy Roll True-union wheel Plummer blocks
_UHLE Box Tops = Carrier Rope Pulley | SS 304/ $5 316 Boxes — wire part
Bagalley Box Tops Gears, Sprockets, Bushes. Duo & TRIVAC Boxes
POLYMATE Ultra High Molecular Weight Polyethylene ( UHMW-PE) isa thermoplastic material, which
was developed for use under extreme conditions. Due to its high molecular weight itis extremely wear
resistant and has excellent sliding properties because of its homogeneous integration and extremely
low co-efficient of friction. Specially designed material grades have already been successfully tested
and used for years by manufacturers of paper machines and paper mills in different countries.
POLYMATE Dewatering Elements are suitable for Paper machine speed from 100 m/min to 600 m/min
with wide variety ofgrades makingit economically comfortable toall buyers.Suction Box Tops _ Vacuum Foils Head Piece Nozzle
ft >) a
a ae]
Blue Vincon Air Load Tube Black Neoprene Air Load Tube Without Shrink Tubes
=o
With Shrink Tubes ‘Straight End Fittings‘POLYMATE PROPERTIES : UHMW-PE DEWATERING ELEMENTS.
“Technical features Testing Method
and Properties _ : =
___ POLYMATE GRADES
VIRGIN.
‘Mos; filled
__ Ceramic
DINS3479.
_Molecular Weight
0.94
68
0.96
9.2
0.98
‘Mechanical Properties
Tensile Strength f
Breaking Strength +23°
Breaking elongation _ | DIN 53455
Torsional strength-+23° | A DINS3447
Shore Hardness D DIN 53505
“Impact Strength V Notch. | mi/mm | DIN 53453
Wear resistance Sand | Virgin=100 | Sand —Slurry
slurry test. Floatation | test
method.
2
a
450
250
66
150
100
23
43
300
o7
70
60
‘Thermal Properties 2. | Polarisation
microscope
Co-effici near : DIN 52328
expansion between 20 & 3
| 100" : :
Heat conductivity at 20° ¢ m | DINS2612
| Antifriction Properties :
| and co-efficient of friction
Dynamicco -efficient of | Ratio: | Plastic against
friction Tension to | surface finish
= —— load (2.2.51)
POLYMATE PROPERTIES : POLYURETHANE LDC CONES & NOZZLES
PROPERTIES
“ASTM
Value
‘SHORE HARDNESS
TENSILE STRENGTH
ELONGATION AT BREAK
COMPRESSION SET 25% DEF. AT 70° C, TIME 48 Hrs
REBOUND RESILIENCE
MAX. SERVICE TEMP.
ABRATION RESISTENCE VOLUME LOSS
SPECIFIC GRAVITY
ANGULAR TEAR STRENGTH
stseeenseeseneesseereenronseornneanentnedesees
COLOUR OPTIONS : Yellow / Red / Blue / Black.
Grade : Vulkollan , Premium , Standard, Capra.
Items : LDC Cone / C.C.Nozzles / Metal inserted wheels.
85-90
175-250
400
a2
43-45
40/110
50
13
60