oun wey in
English
Thank you for using the remote controller. When it is the first time to put in the
batteries, please try it frst. Ifit could work well with all of its functions, the
product can be used directly without setting it. However, ifit could not work
well, it should be set with the following methods before remote controlling
your TV. The remote controller would not lose its memory when the power is
down so that you could replace the battery without resétting it.
RM-9514__ is a brand new kind of universal TV remote controller which
could meet needs of different levels. It is applied to almost all types of
‘TV sets, including old and new types, types with well-known brands
admitted home and abroad, inferior brand types and so.on. Common
functions and menu buttons are all available. It is comfortable to hold
the remote controller due to its lightweight design and it is easy to use.
‘Thus it makes RM-N99 an ideal choice to offer yout life with more
convenience when the original TV remote controller is lost, damaged, or
needs replacement. =
channel select
MUTE
EL Video button
VOLUMES/- —f Channel #/-
Menu we
Fe turn ha Hin SSAC
Sleep of
Regular play key Ream
Screen display key
sound —t@ sae hey
In accordance with the “+,.’ symbols which is indicated inside the battery
cabinet, open the cover and put into two new AAA batteries (nor-rationed),
Which is shown in the figure.
> Please do Not put viu an
together. =
>In case of battery leakag
battery cabinet should bs
> You'd better remove the |
to stop using the remote
of F
The remote controller has t
choose any of them.
A. Inputting code:
4. Turn on TV manually, me
play state, point the remote
TV, and then find the corres
code of the corresponding b
code table.
ee
2. Press the “Settings’button fi
seconds til the work light lights
release the button. Thus it becc
input state.
3. Enter the first set of three-digi
Whenever one digit is input, the
flash once. When alll of the 3 digi
work light would be off, which me
has been finished. If the code is m
set, please use the first one.
4, Test whether other function bu
*Mu
% If not, repeat steps 2-3 until yc
B. Manually searching f
1. Manually switch on theTV set
remote control at the TV set, as
figure:
2. Press and hold the “Settings”
about 3 seconds till the work lig
then release it. It becomes the f
searching state.
3. Press the “VOLUME +" key c
then release it to see whether a
symbol appears on the TV scree
occurs, repeat the
. After the volume symbol is dis
other function button Tocentt
“Power” and "Volume" buttons).
well, press the “Settings” button
and the work light would be off,
the setting has been finished.
‘a
C. Automatically searct
4. Tum on TV manually, make itin a
state, point the remote controller at ti
Je5 not work, res
3 Senreeacei becomes hemanualy 14
be ~ Searching stato,
mae BER
“3. Press the “VOLUME +" key one time
then release it to see whether a volume
son display Key ‘such symbol Tepeat the procedure.
§ symbol is displayed, test
ccther function buttons (except the "Settings".
“Power” and “Volume” buttons). f they work
well, press the “Settings” button immediately
and the work light would be off, which means
‘the setting has been finished.
“K Wkeying does not work, reset from Step 2-
C. Automatically searching code:
4. Tum on TV manually, make itin a normal play
state, point the remote controller at the TV
2 Press and hold the “Settings” bution for about
‘seconds. Do not pelease the button unt the work
lightis on
3. Press the “Power” button o
indicating the automatically se
attention whether the TV volu
button immediately to stop the
for a long time. OF
4, Test whether other function t
“Settings", “Power” and “Volume
well. If they work well, press the
immediately and the work light v
the setting has been finished. If
you find the suitable set of code.
D. Point to Point Brai
4. Turn on TV manually, make |
state, point the remote controll
the symbol of your TV brand, st
its symbol “2”.
2. Press and hold the “Settings” ar
‘corresponding brand symbol” butt
the butions until the work light is o
3, Press the “Volume +” key and re
light would flash once. Pay attentior
volume symbol is displayed. If not
Input 999 to set the code. And the wor
means factory setings have been res!
Warm Tips:
If there are some problems when sett
following methods to solve them:
f= When setting the remote controler
Carefully. the remote controller could
ode, please ty the other sets of code
the remote controller work well (or iy
please try “One-key of fast search”.
Sir you make mistakes:
{three-digit code = long
{you need to reset by the fiet step.
‘Thicase wait patently when searchin
any sots of code.
{fechnical para
Ramet onttngDstene: bout
Bena Soutien ornAk
(Avtersales Servi
Wr ronot confor as pre
Mn macs company or
eae atten coos oe
Met Faia atte rane
Leura oti whoa ee
‘To ensure that you could enj
the shopping bills or receipts
180063148
The Company reserves the f
The design and technical paratp
* Proas the Power” button once, and the worklight
ts would continuously flash,
ating the automaticaly searching code mode has been activated. Pay
Ghention whether the TV volume symbol is displayed. I so, press the “Settings”
For 8 on etl to stop the automatic search and ine work ight would be on
“Settings’, "Power" and “Volume”
‘buttons) could work
well. I they work wall, press the “Settings” button 606
immediately and the work light would be off, which means se
the setting has been finished. not, repeat steps 3-4 until Be
YOU find the suitable sat of code. 2°
D. Point to Point Brand Searching:
1. Turn on TV manually, make it in a normal play
stato, point the remote controller al the TV. Find Tv
the symbol of your TV brand, such as PHILIPS with
its symbot "2°. QS
2. Press and hold the "Settings" and “the
Sortsponing brand symbot buton. Do notrlease. (BY 0)
the buttons until the work light is on. CH + %
3. Pross tho “Volume +” key and release it the work
light would flash once. Pay attention whether the TV
volume symbols displayed. Knot, please repeat his
_ sip. =
Factory Reset function
Input 898 to sot the code. And the working ight woul fash tree
moans factory setings have been restored
Warm Tips:
irthere aro some problems when setting or usin the remote contr, ty the
ing methods to solve ther :
erent rng the romote controle, please follow tho “Inputing code" steps
carefully. If the remote controller could not be used after setting the first ae
Cove, please try the olher sels of code in order. If none of the codes could mab
the remote controller work well (or if your home appliances are not in the list),
“Ono-key of fast search.
a pe mistakes when inputing the code, you could just re-nput he
seeovgitcode 2s long asthe work ight ison. However, if the work ightis of
“oad to reset By the fet step. 2
you need o pation when searching the code manually since there re 60
any sets of cod.
parameters
. it types)
Te Controling Distance: About 8 meters (varies by diferent
pees ‘Type: two pieces of AAA Batteries
ervice
sd temporarily,
‘ote controller has problems of could not be us
tresee contact ‘our company as soon as possible. We would make efforts
‘0 for you with best services, But do not disassemble or repair it by
the soft ‘We would not be responsible for remote controllers that have
boon ‘disassembled without authorization.
‘To ensure thal you could enjoy good after-asles service, please
the shopping bills or receipts when buying the product,
anng3148AINA, (009,057,058 Haier
103,105,112,118,119,175,178,
TRAM sim oman aa
ee ee
016,025,012,019,026,027,028, ‘HAILE,
BAOLE 029,030,31,042
10715 16,128, 129,120,104,
19,471,172173,174,185,106,
167,18, 109 194.2425,
233,265,266 209270271773,
z120
Cea
roNoaue
022047
015,
025,045,046 057 10210,106, ME
oar o¥6018 023024005,
HONE o33040,043,05 00,
rear anc 25.3, apes
cHANGCHENG 040 048 053 058.001 012019,
027 025.028,023,000.031.42,
079,
‘011,053,056 045,046,024, 079,
08,053,056 012,019025,025,
027, 028,029,030,
24
‘DONGDA 016,025
‘007,008 01,013 024,025032,
Saran aE SL (03,039.05 057 065071.073,
FEILANG 016,025 (01,097 102,107,136225 227
: ae " NC 089,161
Wolamenaaen
cacao:
ee
5 gate
011,017,023,024,027,040,041, '027,012,016,019,025,026,028,
ANGLE 3,081,033 73,120204271Ee
KaNGXNG
00800
oon airs,
‘011,016,023.024,025 033,00, aay RIM,
KONGQUE noa.24
se) oor meen
KUNLE 1016,025,093,053,056,079
123
Pee. Deanna 11,018,000,00507,023
024,040,098 048,140,259,260, 0 Sake HO a a tag Pe]
tc 28
SSHENCAL 07,016,025 03,053,056.070
SHENGU 1
LONGIANG ‘04,085,055, 056,079
01,023,024,093,040,043,053,
016,025
8. 149.210,28, 15,
016 .025,033,053,056,009,057, |
ossare
“Se mns.oTt 0 5,033,083,
1 S- 0s6.024 079
a 093.057,058
PANDA. (001,011,016,021,022,023,024, ‘051,053, 068,071,073,082,083,
25,028 02803804005, 408,40, 14158.198,
ra mo.218 020265246207,
(056,009 057, 058,051,062 073,
(089,091,061,124, 125,181,203,
249,248
ee See
PASCMIO 101 00,014,016,027, 083,083 088,
(007,008,018,024,030,089,090,
TOSHIBA 091,070, 158,25,288.287,
PKLYTRON 151,152.26
YXIANGYANG (038,053,056 079
renee, — ERS
ors ‘Of,025,024.08, 038,040,048
am aaorees
ww nim mast
NG 1 aa
(009,057,058.108
ne nt ee
Mr 10 0 O88
20801 16.02.024,025093,
037,039,040,043,050,051,081,, ‘XUELIAN
ys wat
i | 1020S OO
Ru 011,015 023,